PROVN OF CERTAIN MINOR AND REVENUE WORKS UNDER GE NAMS

Amount

Material and Labour for Surface excavation n.exc. 30cm deep and averaging 15 cm deep and getting out in soft and disintigrated rock complete all as specified and as directed.

Material and Labour for Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.exc 10 Sqm on plan and getting out in soft/ loose soil all as specified and as directed.

Material and Labour for Excavation in trenches not exc 1.5m wide and exceeding 1.5m deep but not exceeding 3m deep for foundation etc or for shafts n.exc 10 Sqm on plan and getting out in soft/ loose soil all as specified and as directed.

Material and Labour for Excavation over areas not exceeding 1.5 M deep and getting out in Soft/ Loose Soil all as specified and as directed.

Material and Labour for Excavation over areas exceeding 1.5 M and not exceeding 3 M deep and getting out in Soft/ Loose Soil all as specified and as directed.

Material and Labour for Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard / dense soil etc complete as specified as directed.

Material and Labour for Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and as directed.

Material and Labour for Removing the excavated material to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point.

Material and Labour for Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells etc complete all as specified and as directed.

Material and Labour for hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and Labour for earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

Material and Labour for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

MandL 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

Material and Labour for Plain Cement Concrete as in foundation filling and mass concrete, type D-2, (1:3:6), using 40 mm graded stone aggregate complete all as specified and as directed.

Material and Labour for 75mm plain Cement concrete type C-2, 1:3:6 (40mm graded aggregate) including the top surface finished even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

Material and Labour for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) including water proofing treatment @3% by weight of cement complete all as specified and as directed.

Material and Labour for plain cement concrete (1:2:4) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and Labour for Plain Cement Concrete (1:2:4), type B1, using 20mm graded stone aggregate as in copings, haunching, benching, bed blocks, hold fasts etc., complete all as specified and directed.

Material and Labour for machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate for kerb stone finished with top bullnosed shape and surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished as directed.

Material and Labour for reinforced precast cement concrete Type B1,1:2:4 using 20mm graded aggregate as in lintel beams/shelves/cover slabs (and similar articles with plain faces set in cement mortar 1:4) complete all as specified and as directed

Material and labour for Reinforced Cement Concrete (1:1.5:3) type A1 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc all as specified and as directed.

Material and Labour for Reinforced cement concrete (nominal mix) type A-1 1:1.5:3 (20mm graded aggregate) in Columns, pillars, piers, etc all as specified and as directed.

Material and Labour for Reinforced cement concrete (nominal mix) type A-1 1:1.5:3 (20mm graded aggregate) in roof beams, cantilevers, bressummers, lintels over 1.5m span and complete all as specified and as directed.

Material and labour for Reinforced cement concrete (nominal mix) 1:1.5:3, type A1, using 20mm graded stone aggregate as in suspended slabs supported on walls/columns, in floors, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' bricks in one brick thick honey comb walling ,built in cement mortar 1:4 complete all as specified and as directed.

Material and Labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius, with old size brick built in CM 1:4 all as specified and as directed.

Material and Labour for Use and waste formwork to sides of concrete foundation, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter for rough finished flat surfaces of concrete all as specified and directed.

Material and Labour for Formwork to sides and soffits of floor or roof beam,lintel, flat surface etc incl supports, overhangs etc complete all as specified and as directed.

Material and Labour for Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and as directed.

Material and Labour for form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and simillar works not exceeding 20cm thick and rough finished surfaces of concrete all as specified and directed.

Supply and Fix Solid PVC Door frame of size 95mm x 50 mm made out of 5 mm laminated both side colour PVC sheet reinforcement with MS square tube,supplying and fixing in opening as per specification and drawing complete all as specified and as directed

Material and Labour for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant.

Item no 34 contd.../- WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Supply and Fix 18 mm thick, PVC sheet one side prelaminated of approved texture as in Kitchen cabinet ,cub board (with shelves and partitions) including necessary fitting and fixture as per manufacturer's instructions complete all as specified and as directed.

Supply and Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and Labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bootom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

Supply and Fix aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and as directed.

Supply and Fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

Supply and Fix aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and as directed

Supply and Fix stainless steel butt hinges of size 100 mm complete all as specified and as directed.

Supply and Fix framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and Fix mild steel screw bolts 16 to 20mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5cm long complete all as specified and as directed.

Supply and Fix TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

Supply and Fix TMT bars 6 to 8 mm dia and including in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified.

Supply and Fix Mild steel tubular pipes, in framed work such vertical, horizontal and chinup bar etc, with ends of bars shouldered and/ or riveted, or forged into spikes, incl welding as necessary and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Supply and Fix Rolled Steel sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates including fabricaiton any type and design of Gde Fe 410-0 or Fe 250-0 complete all as specified and as directed.

Supply and Fix Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confiRming to Fe 410 - W (Gde E-250)quality-B, complete all as sepecified and as directed.

Material and Labour for Steel work in tubular trusses and tubular posts including special shaped washers, chequered plate, angles etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed.

Material and Labour for Mild steel rolled section of Fe-410-W (Gde E-250) quality-A, Joist, channel, angle, beam, or tee sections as vertical, horizontal obstacle etc fixed independently, connection plate, including necessary welding bolting etc. (cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and as directed.

Supply and Fix Aluminium anodised powder coating any colour minimum coating 50 micron door/ windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame of fixiing with handles, tower bolts, rubber gasket and maruti lock , complete all as specified and directed etc complete all as specified and as directed. Note :- Floor door spring, sheet glass, wire cloth, etc shall be measured and paid seperately.

Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply and Fix Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding /ridge to wall, fixed with self tapping screws as specified

Supply and Fix 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 complete all as specified and direcyed.

Supply and fix in repair 4mm thick Non asbestos fibre cement building boards fixed or laid flat inserted to timber/GI/Aluminium framework with screws size 600 mm x 600mm grid including Anodised aluminium snap grid frame work for false ceiling Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified and as directed.

Material and Labour for 20- 25 mm thick machine cut kota stone flooring over cement screed base laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick bedding layer in cement mortar 1:6 including rubbing and polishing complete all as specified and as directed.

Material and Labour for 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick as backing coat 1:4 including rubbing and mirror polishing complete all as specified and as directed.

Material and Labour, for machine pressed precast concrete interlocking paver block rubber moulded glossy finished with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks complete all as specified and as directed.

Material and Labour for Rendering 15mm thick on any type of surface in cement mortar (1:4), finished even and smooth without using extra cement complete all as sepecified and as directed.

Material and Labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and smooth (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and as directed. Note-WPC will be measured and paid separately under appropriate items.

Material and Labour for rendering 15mm thick in cement mortar (1:6) on other than fair brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

Supply only, integral water proofing compound. complete @ 3 % by weight cement roof and parapet/ vertical surfaces and like complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Material and Labour for Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified and as directed.

Material and Labour for Preparation of new plastered surface and applying two coats of oil bound distemper on wall over one coat of primer etc complete all as directed.

Material and Labour for Preparation of newly plastered wall surfaces and applying two coats of Exterior weather proof Emulsion paint over one coat alkali resistant primer complete all as specified and as directed.

Material and Labour for Non skid coloured/printed ceramic joint free tiles 7 to 8mm thick area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors etc and and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in mortar 1:4 for laying floor finishes and pointed in white or coloured cment to match all as specified and as directed.

Material and Labour for Non-skid ceramic colour/printed tiles 7 to 8mm thick (Square/rectangular) area of each tiles exe. 0.11 sqm but n.exe 0.18 sqm, in dados,skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in CM 1:4 as bedding layer all as specified and as directed.

Material and Labour for 15 to 17mm thick pre-polished Green marble slab as in partition of urinals, steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in set in 10 mm thick cement mortar (1:4) including rounding of edges complete all as specified and as directed.

Material and Labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as sepecified and as directed.

Supply and Fix Jute rope in horizontal or vertical orientation of 50 mm dia complete all as sepecified and as directed.

Supply and Fix Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

Supply and Fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as spd(minium weight of 190gms) complete all as specified and as directed

Supply and Fix chromium plated waste coupling half or full threaded, suitable for urinals, 32mm dia bore, minimum weight 45 gms complete all as specified and as directed

Supply and Fix 15mm bore dia chromium plated Urinal spreader fixed to pipe complete all as specified and as directed

Supply and Fix 32mm dia PVC waste pipe (corrugated) for wash hand basin complete all as specified and as directed

Supply and Fix 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed

Supply and Fix 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc, fixed to walls and ceilings or laid in floors complete all as specified and as directed

Supply and Fix angle cock fancy type cast copper alloy chromium plated screwed down high pressure with capstan head screwed for iron pipe 15 mm bore complete complete all as specified and as directed.

Supply and Fix 500 ltr capacity triple layer rotational moulded polyetheylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball valve PVC high pressure with palythene float and flynut and 20 dia bore gun metal globe or gate valve complete all as specified and as directed.

Supply and Fix 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and Fix of 75mm PVC (SWR) Nahani/floor trap, plain with ss grating including jointing with solvent cement complete all as specified and as directed.

Supply and Fix Grating doom 125 mm dia with waste hole of PTMT.(Minimum weight 40gms)

Supply and Fix 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and Fix 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.

Supply and Fix for reinforced concrete pipe class NP- 3, 150mm dia with collar laid and jointed with CM 1:3, after they are laid and tested complete all as specified in SSR Part - I and II complete all as specified and as directed.

Material and Labour for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as spd and directed.

Material and Labour for Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia of pipe.complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in and incl new PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)

(a) One light point/Bell/Fan point controlled by one switch.

(b) One 3 pin 5 amps switch socket on independent board.

(c) One 3 pin 5 amps switch socket on same board.

All as per item No. 89 above but wiring with using cable 2.50 sqmm size copper wire (FR) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

Supply and Fix switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and Fix of socket outlet two-in-one, 3 pin each suitable for 5 Amperes flush type, 230 volts AC complete all as specified and as directed.

Supply and Fix of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and as directed.

Supply and fix stepped type electronic fan regulator flush type all as specified and as directed.

Supply and fixing BLDC(Brushless direct current motor) ceiling fan 1200mm sweep copper winding low power consumption,high speed Aluminium body with blade, double ball bearing having minimum air delivery 220 CMM and BEE 5 star rated Including acessories such as remote, connector, canopy, Hanging Rod and clamps , including electric connection with pvc flexible twin core copper wire from ceiling rose to ceiling fan complete all as specified and directed.

Supply and Fix of switch piano flush button single pole one-way 15 Ampere complete all as specified and as directed.

Supply and Fix lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete including LED bulb 9/10 Watt all as specified and as directed.

Supply and Fix ceiling rose 65/50 mm two to three terminals complete all as specified and as directed.

Supply and Fix MCB 32 Amps single pole with neutral, AC 230 Volts complete all As specified and directed.

Supply and Fix MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'B' series in distribution boards complete all as specified and directed.

Supply and Fix Sheet metal enclosure for DB's when MCB's to be used double door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 4 ways complete all as specified and directed.

Supply and Fix double wall corrugated (DWC) pipes made of high density polyethylene (HDPE) with all accessories i.e. all type of joints,sockets,elbows,bends and end cap etc. of size 40 mm outer dia and 32 mm inner dia complete all as specified and directed.

Supply and Fix in replacement of security light fitting LED 25 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed.

Supply and Fix GI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting 36/40 Watt including connection all as specified and directed.

Supply and Fix LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.

Supply and lay in trenches/ on wall and floor LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core complete all as specified and directed.

M/S JASPAL CONSTRUCTION CO (BID ID -3298102)

M/s Vijay Construction Co. (BID ID -3303734)