GE/C-13/2023-24 REPAIR TO ROOF, JOINERY, TILING, PLUMBING INCLUDING CLEANING AND REPAIR OF SEWAGE LINES, MANHOLES AND OTHER CONNECTED WORK AT MD ACCN ARJAN VIHAR AREA, NEW PRATAP CHOWK AND ADJOINING AREAS OF AGE B/R-II UNDER GE (CENTRAL) DELHI CANTT-

Amount

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

All as per item no 02 before but except bricks

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto six storey height.

Taking down cement plaster in concrete or brick wall surface of any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.

M & L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.

M&L Preparation of newly plastered surface applying three coats of white lime wash on walls complete all as specified.

M&L Preparation of newly plastered surface applying two coats of Cement based paint on walls complete all as specified.

M&L for preparation of newly plastered surface applying two coats of oil bound distemper with roller brush (white or tinted) on plastered wall surfaces complete all as specified.

M&L complete removal of existing treatment of old surface with two coat of oil bound distemper on walls / ceiling incl preparation of old plastered surface complete all as specified and directed

M&L resecuring or Easing and adjusing without taking down of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area exc. 1sqm but not exc. 2 sqm each,complete all as specified and directed.

M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified.

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, complete all as specified.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same opening complete all as specified.

S& F 35 mm thick flush shutters solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging complete all as specified.

S&F 35mm thick 2nd class Hard wood rail & style , plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides. The size of rail & style as per IS :1003 (Part I), Kilan seasoned & chemicals pressure treated, complete all as specified.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F Factory Made Solid PVC double door frame of size 120 x 50mm with a wall thickness of 5mm (+0.25) made out of extruded 5mm (+0.25) thick prelam PVC sheet of density 600kg/cum manufactured by an ISO-9001-205 certified company ,and by joining 3 Nos. heat moulded PVC section, The Hinge section of size 35 x 35mm shall be made from plain colour PVC sheet of 5mm (+0.25) thickness, the inside section will be covered with 5mm thick PVC sheet C shape covering section of size 120mm x 50mm. At centre top section of 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cut at two corners and joined with 4 Nosof 150mm long L brackets of 19mm x 19mm M.S square tube or joint by fusion heat welding. The two vertical doors frames are to be shall be reinforced with 25mm x 25mm M.S. square tube of 19 gauge through out the frame. The door frame shall be fixed to wall using 8/100mm long M.S Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc complete as per manufacturers specifications and direction of Engr in charge.

S&F Fibre glass Reinforced Plastic(FRP) Door shutter shall 30mm thick glossy panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000.complete all as specified.

S & F Factory made solid PVC wire gauged/ glazed door and window shutter 30mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail. The wire gauge shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aperture 1.40mm, wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,

S&F mild steel work as in hold fast 25x3mm flat iron and similar articles conforming to Fe-410-0, complete all as specified.

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified

S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed.

S&F 100 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified.

S&F 75 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.

S&F in repairs 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified.

S & F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified.

S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified.

S&F in repair 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified.

S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified.

S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified.

S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified.

S&F in repair Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified.

S&F in repairs 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with steel wire staples, complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed stainless steel wire staple, complete all as specified and directed.

S&F 4.00 mm thick plain sheet glass with wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, complete all as specified.

S&F 4.00 mm thick figured glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified .

S&F 5.5 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm each including grinding of edges for crockery cupboard including taking out/ broken glass with roller, complete all as specified.

S&F mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified.

S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified.

S&F in repair double aluminium channel size 10x20x2 mm, complete all as specified.

S&F MS roller with "C" shape staple, chromium plated for 5.5mm thick sheet glass complete allas specified.

S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed.

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified.

M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed.

M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm / 300x450 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 16-18mm thick black granite stone work (table rubbed and polished) laid over and including 15mm thick screed bed or bedding layer in CM 1:4 as in steps, Jambs, pillars, window clips, cooking platforms and like, inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, front and side of slab moulded and polished complete all as specified and directed. Granite stone slab shall be laid in single piece with rounding of edgesand a grove shall be provided beneath the projection portions of stone slab and provn of hole for gas pipe shall be provided.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified.

S&F Powder aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified.

S & F Steel windows and ventilators with side hung glazed and wiremesh shutters with Z section including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded. .

Taking up or down 15 mm dia GI tubing and connections complete all as specified.

Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified.

S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, pipes should be painted with bituminous paint of approved quality complete all as specified and directed.

S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation of manholes omplete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in surfaces channels and drains complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement omplete all as specified and as directed. .

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. (Water proofing compound shall be measure and paid separatelly).

Supply only intergral water proofing compound complete all as specified and as directed.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches or in floors or fixed to walls with FI clamps etc, bore of pipe 100mm complete all as specified and directed.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches or in floors or fixed to walls with FI clamps etc, bore of pipe 75mm complete all as specified and directed.

Supply and fix cast iron Bends (sand cast) (any radius), diminishing pieces or tapers soil/waste pipes 110mm dia bore with or without duck's foot or heel rest in any length (larger bore measured) complete all as specified and directed.

Supply and fix cast iron Bends (sand cast) (any radius), diminishing pieces or tapers soil/waste pipes 75mm dia bore with or without duck's foot or heel rest in any length (larger bore measured) complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair 110mm dia of any radius PVC (SWR) bends.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150/200mm dia pipes omplete all as specified and as directed.

S & F for precast plastic fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm & 75 mm thick complete all as specified and as directed.

S & F for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx450mm & 50mm thick factory made (make-polycrete) all as specified and directed by Engr-in-Charge.

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC Pipes all types top to bottom including junctions etc, Cleaning of sewage line upto GT in the area of Pratap Chowk and Adjoining Area(Md accn and all types of Accn). complete all as specified and as directed.

Cleaning of GTs in the area of Pratap Chowk and Adjoining Area (Md accn and all types of Accn) complete all as specified and as directed.

Cleaning of Manhole depth of upto 1.20mtr in the area of Pratap Chowk & Adjoining Area(Md accn and all types of Accn) and taking out sludge and depositing ,cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and disposal off the same out side the defence area notified by Municipal Corporation of Delhi all as directed by Engr-in-Charge.

Cleaning of Manhole depth exc 1.20mtr to upto 3.00 mtr in the area of New Pratap Chowk , Arjan Vihar & Adjoining Area (Md accn and all types of Accn) and taking out sludge and depositing ,cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and disposal off the same out side the defence area notified by Municipal Corporation of Delhi all as directed by Engr-in-Charge

Cleaning of sewage line n.exc 10mtr in length in the area of Pratap Chowk & Adjoining Area (Md accn and all types of Accn). complete all as specified and as directed.

Cleaning of Sewage line 0.00mtr to 20.00mtr in length in the area of New Pratap Chowk , Arjan Vihar & Adjoining Area (Md accn and all types of Accn) omplete all as specified and as directed. (Note :- This item will be measured if length exceed from 10.00mtr.) Note :- For execution of item from Srl No. 84 to 89 above Agency should deploy minimum of 03 Nos Safaiwala on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended promptly within 02 hours so that health and life of troops and their families may not be adversly affected.

S & F in repair 75mm dia of outlet cast iron floor trap including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified. Note : Work to be carried out upto G+5 storey bldgs

S & F in repair 75mm dia of outlet cast iron Nahani trap including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified. Note : Work to be carried out upto G+5 storey bldgs

S&F 75mm /100mm dia oval type CI door plate with 02 nos of rubber gasket incl suitable MS nuts and bolts all as specified and directed by Engr-in-Charge with ISI marked Note : Fixing of items upto six storey bldg with safety hazards

S&F in repair vitreous China European type WC with "P" trap 1st quality including connection to drain and fixing bolts incl plastic water closet seat cover complete all as specified and directed.

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580mm white with "P"or "S" trap front or back inlet and integral footrest any pattern (excluding flushing cistern and flush pipe) including Provn of concrete bedding complete all as specified and directed.

Mechanically used high pressure Super Sucker Machine capable of Air lifting of dense sludge like muds, slurry, small stones, debries, grits etc from sewer lines/Manholes thorough vaccum mode and capable of Jetting sewer lines of any dia. The machine shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE. Note: Rates quoted cleaned for 08 hrs of super sucker machine. Any work carried out throughout 08 hrs shall be measured as on Job.

M& L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic including demolition of existing surface all as specified and disposing to debries etc all as directed.

M&L cement concrete 1:2:4 type B-O (12.5 mm graded stone aggregate) as in flooring 25 mm thick, including demolition of existing flooring all as specified and disposing to debries etc.complete all as specified.

M & L for 100 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished, surface even and smooth using extra cement, complete including demolition of existing flooring all as specified and disposing to debries etc.complete all as specified.

M& L for Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in floor in C M 1:6 including cement concrete 1:2:4 type B 1 (20mm graded stone aggregate) as in levelling course 25mm thick including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed by Engr-in-Charge. Make Unistones/ Nitco/ Ultra Tiles.

M & L Machine pressed precast concrete rubber moulded interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 Grade including cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base 75mm thick and 25 mm thick sand cushioning including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed. Make Unistones/ Nitco/ Ultra Tiles.

M & L for preparation of newly plastered surfaces of walls and applying two coats of weather proofing exterior acrylic emulsion paint premier quality on wall surface over one coat of primer from the same manufacturer complete all as specified and directed.

M&L for preparation of old decorated external wall surface by complete removal of exising treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a layer of 2mm thick wall care putty again sand papering thus make surface smooth and applying one coats of wheather proofing exterior acrylic emulsion paint premium quality on wall surface complete all as specified and directed.

S & F in repair Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923-1968 grade St.-240 incl two coat of synthetic enamel paint over a coat of redoxide complete all as specified.

S&F in repairs pre painted galvalume aluminum ZINC coating GI base corrugated steel 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw with minimum 150mm end lap and one corrugation side lap including dismantling the existing sheets complete all as specified and directed.

S & F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc

M&L preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer, complete all as specified.

M&L for removal of plant growth with complete root and making good with PCC 1:2:4 type B0 using 12.50mm graded aggregate or plaster 1:4 in case of wall. The Size of block shall be Multi storey vary in nos of floors. All roots of plants shall be removed completly and making good the disturbed surface and painted with acrylic paint or exterior emulsion paint complete all as specified and directed.

Schedule of Credit

ANSH VANSH CONSTRUCTION COMPANY

GIAN ENGINEERS

imran construction company

a.k constructions

LAMBA ENTERPRISES

POONAM ENTERPRISES

J S CONSTRUCTION CO

M/S CHANDER MUNI