GE/BAS-56/2026-27 Provn of light pole with security light at Basoli under GE Basoli

Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation or laying of UG cable/ pipe and getting out in any type of soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and depth exc 1.5 m but n exc 3.0 m in depth for foundation or laying of UG cable/ pipe and getting out in any type of soil complete all as specified and directed.

M&L returning, filling and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point, complete all as specified and directed.

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Supply and fixing of flood light of capacity 100 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP-66 made out of pressure die cast aluminium housing suitable lens & toughened glass with high power LEDs as light source with electronic chip and driver complete all as specified and directed.

Supply and erect steel tubular swaged pole type 410 SP-31 (9 metre long) complete with cast iron/MS base plate, top plate welded with MS round sheet with necessary nuts, bolts and washers duly painted with a coat of red oxide primer and two coat of aluminum paint including black and yellow strip 30cm in height above the coping of the pole complete all as specified and directed.

Supply and fixing of junction box of minimum size 30cm (height) x 25 cm (width) x 15 cm (depth) made of steel sheet 1.6 mm thick duly painted with two coat of synthetic enamel paint over a coat of red oxide primer having aluminium bus bar 4 Nos of capacity 63 Amps with minimum 04 Set of nuts, bolts & washers on each busbar mounted on porcelain/PVC insulator having 01 No MCB, SP, 6/16 Amps Junction box shall be fixed on pole & including suitable, MS strip, nuts, bolts & washers suitable for bottom entry of cable of size upto 25 sqmm including suitable cable glands, thimbles complete all as specified and directed.

M&L for structural steel work conforming to grade Fe-410S as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, including, nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat, one finishing coat of aluminium paint and epoxy coating complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graged crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.