COMPREHENSIVE MAINT OF OTM ACCN AT TECH AREA AND PETTY REPAIR FOR DAY TO DAY MAINT OF TECH AREA AT GE (AF) GORAKHPUR

Amount

M&L for one coat of exterior emulsion paint over old decorated surface of wall including preparation of surface complete all as specified and as directed.

M&L Complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coats of exterior emulsion paint on walls complete all as specified and as directed.

M&L for Preperation of old painted surfaces of wall by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying one coat of exterior emulsion paint in camouflage pattern (two or more colour combination) complete all as specified and directed at site

M&L for Complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coat of exterior emulsion paint camoflague pattern over a coat of primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint by manual/ using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of wall and priming plastered and other surfaces with alkali resistance primer and applying one coat of oil bound distemper to achive smooth surface complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and priming plastered and other surfaces with alkali resistance primer and applying two coat of oil bound distemper to achive smooth surface complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L brick work in CM ( 1:6 ) with using sub class `B' brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and as directed.

Taking down cement plaster on brick wall and ceiling including raking out joints hacking for key scrubbing down with water etc complete all as directed.

M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall / concrete surfaces finish fair and even without using extra cement complete all as specified and directed at site

M&L for rendering 15 mm thick in CM ( 1:4 ) plaster on wall / concrete surfaces finish even and smooth without using extra cement complete all as specified.

M&L for rendering 05 mm thick in 1:3 cement mortars as in ceiling complete all as specified and directed at site

M&L including preparation of new plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed at site

M&L including preparation of new plastered surfaces and applying two coat of cement base paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coat of exterior emulsion paint camouflage pattern over one coat of primer and 2mm wall care putty by using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and priming plastered and other surfaces with alkali resistance primer and applying two coat of oil bound distemper to achive smooth surface complete all as specified and directed.

M&L for 1mm thick wall care putty on wall to achive smooth surface complete all as specified and directed.

Dismantling of false ceiling board ,fiber insulation board any thickness including wooden cover fillets aluminium frame work as directed .

S&F anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 4mm thick non asbestos fibre cement building building boards on aluminium framework complete all as specified and directed.

M&L for raking out cement mortar joints/pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs etc complete all as specified and directed

M&L for flush pointing in brickwork laid flat on roof surface etc with using cement mortar 1:3 complete all as specified and directed

Dismantling existing transparent PVC sheets in roof complete all as specified

S&F 2.0mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed in roof etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

M&L 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugeted steel sheet having tensile sterength of 550 Mpa as an roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for refixing of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugeted steel sheet having tensile sterength of 550 Mpa as an roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without taking off shutters from the frames) complete all as specified and directed at site

M&L for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L for flat iron 40mmx6mm as in clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 as in filling in holes of hold fasts complete all as specified and directed at site

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkhats complete all as specified .

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed at site

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2 ,modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 200 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed at site

S&F 150mm long aluminum handles cast type anodized fixed complete all as specified and directed at site

S&F 100mm long butt hings medium weight cold rolled stainless steel and fixed complete all as specified and directed at site

S&F aluminium alloy anodised sliding door bolt with hasp and staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt aand sliding bolts of extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and as directed by Engineer in Charge.

M&L for painting on new wooden surfaces of any description, not otherwise described, over 10cm width or girth over one coat of pink primer and applying two coat of synthetic enamel paint including preparation surfaces complete all as specified and directed at site

M&L powder coated aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

M&L powder coated aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed .

S&F in repair curtain rod/rail with drapery rod stainless steel fancy type 25 mm dia including bracket and with two glob with necessary fitting etc measured end to end of globe as requirement at site complete al as specified and directed.

Repair/easing/ readjusting of aluminium door/window shutters by taking down shutters from frame and dismentling members of shutters like, glass, rails and styles by necessary cutting, grinding of members etc and refixing of same including rubber gasket ,hinges , handle, screws etc complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed at site

S&F in repair door closer hydraulically regulated, aluminium (extruded section body )designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg complete all as specified and directed at site .

S&F in repair 5.5mm thick, sheet/ tinted glass, ordinary quality to be fixed with aluminium beading and rubber gas kit in aluminium frame work as in door/ window/ partition etc all as specified and directed.

M&L in repairs for 4mm thick both side aluminium decorative sheet laminated partition panel for fixing in aluminium door shutters by taking out old ply/board from exsting aluminium door shutters complete all as specified and directed

S& F in repair aluminum glazing clips / beading for aluminum door and window complete all as specified and directed at site

S& F in repair rubber gasket for packing / beading for aluminum door and window

Demolition of PCC floor ,plinth and paving not exceeding 15 cm thickness below or above ground level .

M&L 75mm thick PCC (1:3:6) type C1 as in plinth protection etc finished even and smooth without using extra cement.

M&L for providing cement concrete type B-1, 1:2:4 using 20 mm graded aggregate as in 40 mm thick flooring ,finishing the concrete surfaces even and smooth using extra cement .

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in CM 1:4 CM laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including dismantling of broken kota stone slabs.

Dismantling of wall tiling and M&L for glazed ceramic coloured tiles 350x250x7mm/ 450x350x7 mm thick on wall as in dado / skirting laid with cement slurry over 10mm thick rendering CM in 1:4 complete all as directed .

Dismantling of floor tiling and M&L for non skid Ceramic coloured tiles 7-8 mm thick (square or recatngular ) area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15 mm thick screed bed in 1:4 CM complete all as specified and directed.

Dismantling of existing tiling and M&L for Light shade Vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over 15mm thick screed bed in 1:4 cement mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing broken granite slab complete all as specified and directed.

Taking down 15 mm bore water tubing and connection including cleaning for re-fixing or removing to store.

Taking down 20 mm bore water tubing and connection including cleaning for re-fixing or removing to store.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

All as per item No. 61 above but 20mm bore.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 15mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

All as per item No. 63 above but 20mm bore complete all as specified and directed.

Dismantling of water tank PVC of any pattern and S&F for 500 ltr capacity rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top ) hoisted and Fixed in position all as specificed in SSR part-I. Including supply and fixing of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and Fixed ( Min Wt 15mm -142 Grams) complete all as specified and directed.

S&F in repair for 15mm bore bib tap chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete as directed.

S&F in repair for 15mm bore pillar tap cast copper alloy (fency type) with capstan heads ,chromium plated ,screwed down high pressure .with or without lettered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes. complete all as specified and directed at site

S&F in repair for 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete as directed.

S&F in repair for 20 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete as directed.

S&F in repair for 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed ( Min Wt 15mm -142 Grams) complete all as directed.

S&F in repair for 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed ( Min Wt 20 mm -210 Grams) complete all as directed.

S&F in repair vitreous china wash hand basin flat back sizes 550mmx400mm excluding taps,waste chain and plug and porcelain stopper but including bracket complete all as specified and directed at site

S&F in repair Vitreous China wash down water closet pan (Europian pattern) white excluding flushing cistern & flush pipe including plastic water closet seat cover closed pattern with flat bottom and cover and MS chromium plated aluminised hinging device including connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc. complete all as specified and directed at site

S&F in repair Viterous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, bedding urinal against wall in cement mortor 1:2 complete all as specified and directed at site .

S&F in repair CP soap dish/tray fixed with wall complete all as specified and directed at site

S&F in repairs PVC connections 15mm sizes with PTMT nut of length 600mm complete all as specified and directed at site

S&F in repair PTMT gratting doom of 100mm dia size complete all as specified and directed at site

S&F in repair PVC valveless syphonic action type low level flushing cistern and flush pipe for 10ltr capacity with inlet ball valve float and handle including bracket complete all as specified and directed at site

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed at site

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed at site.

Petty repair to leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pllar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water supply Repair to leaking flushing cistern low/high level, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water supply available upto water taps incl attending the complaints of no water supply.repair to PVC bend, pipe etc . ( Rates are deems to be including replacement washers (hot/cold) ,, flush pipe,GI Nipple,union,Socket,Reducer Socket,bend,Elbow,Reducer Elbow ,Tee,brass spindle, flush syphon, flush handle etc) complete all as specified. Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. 2.. Rate shall be quoted accordingly, keeping in mind above said provisions. 3.The complaint shall be attended by the contractor within 12 hours ,falling which a panel recovery of Rs. 200/-per complaint shall be recovered from the contractor dues and no disputes will be intertained at later stage.

Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, dressing table, pelmets, plate rack incl Aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, complete all as specified and directed by Engineer in Charge. Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. 2.. Rate shall be quoted accordingly, keeping in mind above said provisions. 3.The complaint shall be attended by the contractor whithin 12 hours ,falling which a panel recovery of Rs. 200/-per complaint shall be recovered from the contractor dues and no disputes will be intertained at later stage.

Petty repair to existing steel window /Rolling Shutters, Pressed steel frame, Rat tails spring, Steel Almirah, Mortise lock fitted in steel Almirah and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100 mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional (Welding rod welding machine, small fittings such as window handle, hinges etc will be provided by the contractor) removing the steel window shutters from the frame and re-fixing after making serviceable complete all as specified and directed by Engineer in Charge. Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. 2.. Rate shall be quoted accordingly, keeping in mind above said provisions. 3.The complaint shall be attended by the contractor whithin 12 hours ,falling which a panel recovery of Rs. 200/-per complaint shall be recovered from the contractor dues and no disputes will be intertained at later stage.

M&L for replacement of MS brackets for WHB/sink/flushing cistern fixed in repairs incl taking down old brackets and making good damaged surfaces to match with the existing etc complete all as specified and as directed by Engineer in Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm. complete all as specified and as directed by Engineer in Charge.

S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin complete all as specified and as directed by Engineer in Charge.

S&F in repair waste fiting suitable for stainless steel kitchen sink complete all as specified and as directed by Engineer in Charge.

S&F in repair PVC waste pipe flexible type suitable for couplings 32mm & 40mm dia 600mm long complete all as specified and as directed by Engineer in Charge.

S&F in repair CP 75mm/100mm dia round mild steel chromium plated grating fixed on floor trap/Nahni trap in CM 1:6 complete all as specified and as directed by Engineer in Charge.

S&F in repair flush pipe (PVC) for low level flushing cistern including joining to WC complete all as specified and as directed by Engineer in Charge.

S&F in repairs PVC syphon with handle complete for low level flushing cistern complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC polyplast float valve for cistern tank complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan white Orissa patern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron 'P' trap incl lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and as directed by Engineer in Charge.

S&F in repairs Cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75mm including burning lead joints etc to facilitate dismatling of old CI trap and making good in cement concrete type B1 (1:2:4) complete all as specified.

S&F repair plastic water closet seat cover for pedestal or semi pedestal pattern, white/black closed pattern with flat botom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer in Charge.

S&F in repair, 15mm Bip taps (Long body), cast copper alloy (chromium plated) with crutch handle or butter fly handle, fancy type screwed down , screwed for iron pipe and fixed , complete all as specified and directed.

S&F in repair 15 mm angle stop valves (fancy type), cast copper alloy , chromium plated, screwed down high pressure witg crutch and butter fly handles , screwed with iron pipes or for union complete all as specified .

S&F in repair Concealed stop cock (fancy type),15 mm bore, chromium plated ,with long shank and cup, complete all as directed .

S&F in repairs 15mm bore dia Brass CP central hole mixer for mixing hot & cold water screwed down with PVC & CP connection on WHB complete all as specified and directed by Engineer-in-Charge.

S&F in repair health CP faucet with 1.00 to 1.50 metre long good quality stainless steel flexible pipe suitable for 15 mm bore complete all as specified and directed.

S&F in repair SS jet spray for water closet with suitable SS flexible pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass CP shower rose of size 100mm with arm including fixing to steel pipes complete all as specified and directed.

S&F In Repair , Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore iron pipe and fixed.complete all as spscified and directed.

S&F in repair black PVC cover for rotational moulded polyethylene water storage tanks 500 ltr capacity, complet all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing’s or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete.

S&F in repair/ refixing of existing anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 4mm thick non asbestos fibre cement building boards (except material) on aluminium framework complete all as specified and directed.

Repair/easing/ readjusting of aluminium door/window shutters by taking down shutters from frame and dismentling members of shutters like, glass, rails and styles by necessary cutting, grinding of members etc and refixing of same including rubber gasket ,hinges , handle, screws etc complete all as specified and directed.

S&F in repairs butt hinges cold rolled mild steel 100mm long medium weight fixed to angles iron/wooden chowkhat incl making etc complete all as specified and as directed by Engineer in Charge.

S&F in repairs butt hinges cold rolled mild steel 75mm long medium weight fixed to angles iron/wooden chowkhat incl making etc complete all as specified and as directed by Engineer in Charge.

S&F in repairs rubber door seal (Rubber Strips) of size 900mmx 50mmx 2 to 3 mm thick fixed to wooden doors complete all as specified and directed by Engineer-in-Charge.

S&F in repair galvanized mild steel wire clothes 0.56 nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in repair mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frame or with welding to steel frames complete all as specified and as directed by Engineer in Charge.

S&F in repair mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and incl a minimum of 06 bolts and nuts. Four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and as directed by Engineer in Charge.

S&F in repair aluminium alloy anodised sliding door bolt with hasp and staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and as directed by Engineer in Charge.

S&F in repair aluminium anodised barrel tower bolt of extruded section length of bolt 200mm complete all as specified and as directed by Engineer in Charge.

S&F in repair aluminium anodised barrel tower bolt of extruded section length of bolt 150mm complete all as specified and as directed by Engineer in Charge.

S&F in repair mild steel barrel tower bolt stove enamelled with bright bolt length of bolt 200mm all as specified and as directed.

S&F in repairs extruded aluminium alloy handles fabricated type 150mm size complete all as specified and as directed by Engineer in Charge.

S&F in repair 50mm double legged door stopper of Aluminium alloy with rubber complete all as specified and directed at site.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed by Engineer in Charge.

S&F in repairs steel window handles with nuts & bolts or with screws complete all as specified and as directed by Engineer in Charge.

S&F in repair steel window peg stay all as directed complete all as specified and as directed by Engineer in Charge.

S & F in repairs 100mm Hasp and staple, safety type, of anodised aluminium including bolt to hinge plate and fixed with screws complete.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beads in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete.

S&F 3mm thick figured glas pin head type and glazing with oil putty or wooden beads in squares not exc 0.50 Sqmtr each pane including hacking out old broken glass (any size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete.

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of 300x200x7mm/300x450x7mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint , white or tinted (colour & shade as approved by GE) , over one coat of primer up to three stories,complete all as specified and directed.

M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & over a coat of alkali priming coat.

M & L for Preparing new plastered or unplastered surfaces of wall and applying three coats of white wash complete.

M & L preparing new plastered surface of ceiling and applying three coats of white wash complete

M&L for 25 mm thick Prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed as in cupboard with handle arrangement to up down on required size including dismantling boarding, any description, fixed in any position with nail or screw complete .

M&L for disconnecting existing tanks incl 500 litre & upto 1000 litre capacity, setting aside (or lowering if required) for repairs & cleaning etc including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting /refixing in same position after cleaning complete all as specified and directed.

S&F 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high desity plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres all as specified and directed.

M&L 100mm dia CI spun pipe including necessary repair to cement in wall/floor etc and making proper functioning of pipe lines jointing with cement mortar including taking down CI pipe with necessary brackets from wall/floor etc and removing to store complete all as specified and directed.

M&L 75mm dia CI sand cast pipe including necessary repair to cement in wall/floor etc and making proper functioning of pipe lines jointing with cement mortar including taking down CI pipe sand cast with necessary brackets from wall/floor etc and removing to store complete all as specified and directed.

S&F Cast iron bends/ branch pieces etc of any radius, diminishing pieces or tapers 100mm bore size complete.

S&F Cast iron bends/ branch pieces etc of any radius, diminishing pieces or tapers 75mm bore size complete.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls including taking down eaves gutters and rain water pipes (any size or pattern) , including all fittings , heads, shoes, bends,swann necks, etc and removal to store complete all as specified.

S&F 110 mm dia PVC (SWR) bends/Tees/branch pieces etc any radius complete

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls including taking down eaves gutters and rain water pipes (any size or pattern) , including all fittings , heads, shoes, bends,swann necks, etc and removal to store complete all as specified.

S&F 75 mm dia PVC (SWR) bends/Tees/branch pieces etc any radius complete

NEHA INFRASTRUCTURE & COMPANY

M/S APARNA ASSOCIATES

M/S BHARAT CONSTRUCTION

M/S B.P. CONSTRUCTION

ANIRUDH ENTERPRISES

M/S SHAILZA TRADERS

M/S NITISH ASSOCIATES

M/S GUPTA TRADERS

A K CONSTRUCTIONS

M/S DELTA ENTERPRISES