PERIODICAL SERVICES AT GANESHKHIND AND ARMAMENT COLONY UNDER AGE B/R PASHAN

Amount

M & L for preparation of plastered and unplastered old decorated surfaces of wall including brooming down or scraping down with wire steel brushes of smoke spots, moulds, moss efflocerent salt and treading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed by Engr-in-Charge.

M & L for preparation of plastered and unplastered old decorated surfaces of ceiling including brooming down or scraping down with wire steel brushes of smoke spots, moulds, moss efflocerent salt and treading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of Oil Bound distemper complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new plastered surfaces of ceiling and applying two coats of Oil Bound distemper over a coat of primer complete all as specified and directed by Engr-in-Charge.

M & L for preparation of plastered and unplastered old decorated surfaces of wall including brooming down or scraping down with wire steel brushes of smoke spots, moulds, moss efflocerent salt and treading oil and greasy spots and applying one coat of Oil Bound Distemper complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment with wire steel brushes of smoke spots, moulds, moss efflocerent salt on wall and applying two coats of Oil Bound distemper over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for applying 3mm thick wall care putty on wall complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old wall surfaces complete all as specified and directed by Engr-in-Charge.

M & L for preperation of new surfaces of walls and finishing with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment including fencing, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by crack fill paste of Asian Paints or equivalent make and make good smoothen surface by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 litre (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied overand including one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI complete all as specified and directed. Allow 6 to 8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed by Engr-in-Charge. Make: Asian Paints Ultima Protect/Nerolac excel top Guard/Berger Weather coat long life.

Material and labour for preparation of newly plastered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 litre (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/10 sq mtrs diluted with water in 1:1 ratio as per manufacture's instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. Make: Asian Paints Ultima Protect/Nerolac excel top Guard/Berger Weather coat long life Notes for smart periodicals item no 9 and 11 : (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed.(b) The contractor shall upload MoU between tenderer andmanufacturer of paints and their authorized applicator before quoting the bids and submit the same alongwith performance security of tender. (c) Cost of scaffolding at any height shall be included in the quoted rate. (d) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, fascias, parapets etc shall be done by using mechanial sander with internal dust extraction system for clean environment certified by the manufacturer. After the prepartion of surface written approval shall be obtained from GE before applying primer and further treatment/ coats. Bldg wise stage passing register shall be maintained. (e) Finishes ie cement based paint, acrylic water based exterior grade primer,premium acrylic smooth exterior emulsion etc to walls, ceiling, chajjas, fins, fascias, prapets etc shall be applied using airlessspray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of areputed manufacturer with pro-guard technology and capability of tracking pressur as well as paint and primer usage (f) This equipment shall be certified by approved manufacturer.(g) The accessories for applying the finishes shall be spray in hard to reach areas and penetration of finishes on the surface so asto achieve uniform application and quality surface finish. (h) The contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR and Final bill complete all as specified and directed by Engr-in-Charge.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high using specific brush complete all as specified and directed by Engr-in-Charge.

M&L for writing stops, commons, short lines, dashes, hyphens, brackets, etc using specific brush complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

M & L for 15 mm thick plastering on fair faces of brickwork or concrete surface in CM 1:6 finishing even and smooth without using extra cement all as specified and directed by Engr-in-Charge

M & L for 20 mm thick rendering on fair faces of brickwork / concrete surface on wall in CM 1:4 using WPC @ 3% by weight of cement, complete all as specified and directed by Engr-in-Charge. Note:- WPC shall be measured seperately.

Supply only Integral waterproofing compound, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 5 mm thick in cement mortar 1:4 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for Preparation of old surfaces of wood and wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M & L for Preparation of old painted surfaces of steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M & L for Preparation of old surfaces of wood and wood based materials of any description n exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M & L for applying two coat of oil bound distemper over a coat of primer to newly plastered surface including preparation of new plastered surfaces including 1mm thick wall care putty to wall complete all as specified and directed by Engr-in-Charge.

M & L for applying three coats of white wash to newly plastered surface of ceiling including preparation complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass, (any thickness, size , qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one max upto forth floor complete all as specified and directed by Engr-in-Charge.

M & L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

M & L for Figured glass, pinhead type 4mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane complete all as specified and directed by Engr-in-Charge.

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engr-in-Charge.

S&F of PVC (SWR) pipes of 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall complete all as specified and directed by Engr-in-Charge.

S&F of PVC (SWR) pipes of 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall complete all as specified and directed by Engr-in-Charge.

S&F of PVC (SWR) bend of 75mm radius complete all as specified and directed by Engr-in-Charge.

S&F of PVC (SWR) bend of 110mm radius complete all as specified and directed by Engr-in-Charge.

S&F of 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-in-Charge.

S & F Pulley operated clothes drying system (Pull-it 6 feet x 4 pipe) consisting of anodized Aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm. Pulleys made up of Delrin with rope guide mounted on channel pair of length 24 inches (distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self-tapping screws provided in kit. Rope will be Polyester braided undyed of 3 - 4 mm dia complete all as specified and directed by Engr-in-Charge.

Sunil Constructions (BID ID -3078702)

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd (BID ID -3077814)