PROVISION OF ADDITIONAL TOILET BLOCKS FOR LIVING IN BILLETS AT AF STN UTARLAI

NOTE:- Schedule ‘A’ (Part- I) under Ser No.1.01 to 1.07. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.The estimated rate is left blank since the same is not prepriced by MES

Construction of Toilet Block Building having IWC (03 Nos), WHB (03 Nos), Bath Room (02 Nos), Urinal (02 Nos) with RCC framed structure, Brick Masonary, RCC roof slab etc. complete all as specified and as shown on drawings.(NEAR T-241)

Construction of Toilet Block Building having IWC (03 Nos), WHB (03 Nos), Bath Room (02 Nos), Urinal (02 Nos) with RCC framed structure, Brick Masonery, RCC roof slab etc. complete all as specified and as shown on drawings. (NEAR T-243)

Construction of Toilet Block Building having IWC (05 Nos), WHB (05 Nos), Bath Room (04 Nos), Urinal (03 Nos) with RCC framed structure, Brick Masonary, RCC roof slab etc. complete all as specified and as shown on drawings. (NEAR P-611)

Construction of Toilet Block Building having IWC (14 Nos), WHB (08 Nos), Bath Room (14 Nos), Urinal (08 Nos) with RCC framed structure, Brick Masonary, RCC roof slab etc (In double storeyed ) complete all as specified and as shown on drawings. (NEAR P-425)

Construction of Toilet Block Building having IWC (04 Nos), WHB (03 Nos), Bath Room (03 Nos), Urinal (02 Nos) with RCC framed structure, Brick Masonary, RCC roof slab etc. complete all as specified and as shown on drawings. (NEAR TD BILLETS SQDN)

Construction of Toilet Block Building having IWC (09 Nos), WHB (05 Nos), Bath Room (08 Nos), Urinal (06 Nos) with RCC framed structure, Brick Masonary, RCC roof slab etc. complete all as specified and as shown on drawings (NEAR P-257)

Construction of Toilet Block Building having IWC (04 Nos), WHB (03 Nos), Bath Room (03 Nos), Urinal (02 No) with RCC framed structure, Brick Masonary, RCC roof slab etc. complete all as specified and as shown on drawings. (NEAR TD BILLETS)

NOTE:- Schedule ‘A’ Part- II to X. Ser No. 2.00 to 10.00 are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out by the Contractor for Internal electrification as listed in Sch 'A' Part- II

Lump sum price worked out by the Contractor for Internal Water Supply as listed in Sch `A’ Part- III

Lump sum price worked out by the Contractor for Road/Path as listed in Sch 'A' Part -IV

Lump sum price worked out by the Contractor for Sewage Disposal as listed in Sch `A’ Part V.

Lump sum price worked out by the Contractor for External Water Supply as listed in Sch `A’ Part- VI

Lump sum price worked out by the Contractor for External Electrification as listed in Sch `A’ Part - VII

Lump sum price worked out by the Contractor for Hot Water Supply as listed in Sch `A’ Part -VIII

Lump sum price worked out by the Contractor for Site Development as listed in Sch `A’ Part -IX.

Lump sum price worked out by the Contractor for Demolition and Dismantling Work as listed in Sch `A’ Part -X.

SCHEDULE 'A' PART - XI (MISC ITEMS) Note for items 12 to 21 :- The contractor shall quote his rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES)

S&F for LED tube light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed. Make: CG/Havells/Philips

S&F for Light mirror light fitting 2' long, 10/20 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

M & L for construction of valve chamber of internal size 0.9 mtr x 0.9 mtr x 0.9 mtr with 100 mm thick PCC (1:4:8 ) type D-2 for foundation , brick walls built in cement mortor (1:4 ), PCC 1:2:4 type B1 for coping , rendering in cement mortor 1:4, 15 mm thick both internally and externally upto 15 cm below GL including provision of MS sheet cover using angle iron 50 x 50 x 6 mm as a frame embedded in concrete and 3 mm thick MS sheet as in cover with necessary locking arrangements duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and two coats of white wash after preparation of surafces including necessary earth work and excavation complete all as specified and directed.

M & L for construction of valve chamber of internal size 0.6 mtr x 0.6 mtr x 0.6mtr with 100 mm thick PCC (1:4:8 ) type D-2 for foundation , brick walls built in cement mortor (1:4 ), PCC 1:2:4 type B1 for coping , rendering in cement mortor 1:4, 15 mm thick both internally and externally upto 15 cm below GL including provision of MS sheet cover using angle iron 50 x 50 x 6 mm as a frame embedded in concrete and 3 mm thick MS sheet as in cover with necessary locking arrangements duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and two coats of white wash after preparation of surafces including necessary earth work and excavation complete all as specified and directed.

M&L for Tibba Sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. Note:- Punned thickness shall only be measured a 18 Cm.

Supply and laying for stone patti 40-50 mm thick, 25-30 cm wide abutting each other for cable protection complete all as specified.

Design, fabricate, supply, testing and commisioning of CPRI approved factory made LT Panel Board, cubicle type of size 850x850x450mm, double door, out door type fabricated out of 3.15mm thick CRCA sheet steel for outer body and 2.00mm thick CRCA Sheet for inner partition walls, independent cabinate with cabinate doors for MCCBs, Bus Bars, cable trays, cable glands, metering equipment, vertical type floor mounted on angle iron frame of ISA 50x50x6mm with minimum height of legs 45 cm, minimum IP-54 protection, comprising of solid aluminium bus bar 4 strips suitable of 200 Amps, suitablily grouted to PCC complete with internal wiring, epoxy powder coated, incl connection of cable ends with suitable size of aluminium cable lugs and drawing of panel must be approved before placing the order for fabrication. Make of MCCB - Havells / L&T / Legrand / Schneider

Design, fabricate, supply, testing and commisioning outdoor weather proof bus bar chamber of size 120cm x 40cm x 40cm made out of 18 SWG MS Sheet having one side openable hinged door shutter with locking arrangement mounted on 40x40x6cm angle iron frame with legs welded and 04 Nos aluminium bus bar of 100 Amp rating including of one MCCB TPN 40 Amps 16 KA for controlling electric supply complete erected on ground with necessary PCC 1:3:6 type C2 foundation, complete buys bar chamber painted with two coats of approved synthetic enamel paints over one coat of red oxide primer including making cable connection with necessary gland, lugs, thimbles etc complete all as specified and directed.

S&F for MCCB 100 Amps 4 Pole, 25 KA, 415 V, 50 Hz and connecting up in the existing panel location complete all as specified and as directed by Engineer-in-Charge. Make- Havells/L&T/Schneider/Legrand

Please Enable Macros to View BoQ information