Tender for renovation and maintenance of seminar room at 1st floor in Academic Block.

Prescribed Format for Submission of Financial Bid (Part-II) (All eligible bidders will quote their offer in prescribed format inclusive of all charges like Cartage, Freight, Material Handling, Loading, Unloading Transit Insurance etc. except GST)

Name of work: Renovation & maintenance of seminar room at 1st floor in Academic Block of Dr. RMLIMS, Lucknow.

Sr. No. Discription of Item Quantity Unit Rate (Rs.) Amount (Rs.)

1 Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595 mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600 mm center to center in a floor and ceiling channel section of size 50 x 32 mm fixed to the floor and soffit at 600 mm center using 12 mm dia,50 mm long wedge type expanded zinc alloy dash fastener with 10 mm bolt. This same channel is then to be fixed in horizontal direction at 600 mm center to center so as to form a grid of 600 mm x 600 mm. Glass wool of 50 mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2 mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50 mm wide (90 meter) roll and two coats of primer suitable for paneling as per manufacturer’s specification as per direction of Engineer in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. 237.49 Sqm

2 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fiber and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanized iron section of 0.40 mm thick on Silhouette profile, rotary stiched double webbed white with 6 mm reveal profile (white/ black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles. 149.04 Sqm

3 Proving & fixing of gypsum board false ceiling (at the place of damaged false ceiling) including labour, required hardware and material such as gypsum board, hangers, G.I. channels, jointing compound, jointing tapes, fastener etc. Complete in all respect. i/c removal of old damaged false ceiling. 68.83 Sqm

4 Providing & applying one coat of primer & necessary surface preparation with Birla putty/POP as per site requirement to give smooth & wave less surface before application of priming coat. 68.83 Sqm

5 Distempering with oil bound distemper two coat of make berger/ nerolac/ OR equivalent, on old work, including all materials, labour and T & P required for proper completion of the work, complete in all respect. 68.83 Sqm

6 Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick : Second class teak wood. 132.61 Sqm

Total Amount (Rs.)

Rs. in words :-

Key notes to all Bidders- • It is mandatory for all bidders to quote their rates for all the items in the prescribed format of Financial Bid (Part II), otherwise Financial Bid will be treated as non–responsive bid and will summarily be rejected. • The Institute has full right to modify or amend the scope of work or tendered quantity depending upon the nature of work. • All tendered quantity as mentioned in the schedule of requirement is tentative and amount will be paid on actual basis.

Name and Signature of Bidder____________________