Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.2 LAccepted-AOC | L1 | Accepted-AOC aoc | |
| 2 | L2₹42.1 L+₹17,645 (0.42%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bid | |
| 3 | L3₹42.4 L+₹53,810 (1.28%)Rejected-Finance OPP SHRI NAVNIKETAN H S SCHOOL CHHOLA KANCHI BHOPAL M P 462 010 | BHOPAL | BHOPAL | MADHYA PRADESH | 462010 | L3 | Rejected-Finance 3rd lowest bid | |
| 4 | L4₹42.8 L+₹92,961.50 (2.22%)Rejected-Finance | L4 | Rejected-Finance 4th lowest bid | |
| 5 | L5₹44.2 L+₹2.4 L (5.63%)Rejected-Finance NEAR GURUDWARA JHANSI BHOPAL ROAD SAUGOR M P 470002 | SAUGOR | SAGAR | MADHYA PRADESH | 470002 | L5 | Rejected-Finance 5th lowest bid |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
SPL REPAIR TO BLDG NO BK-37 OTM ACCN AT 56 ENGR REGT UNDER GE SAUGOR
2022_MES_571154_1
GE/SGR/TOK-55 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹94,000
Yes
30 Jan 2023
24 Dec 2022
23 Jan 2023
24 Dec 2022
21 Jan 2023
9 Jan 2023
Amount
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding removal servicable tiles from site and rubbish off the premises complete all as specified and directed.
Dismantling framed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed.
Dismantling wooden framed trusses not exc 10 m span complete all as specified and directed.
Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed.
Demolition of PCC of any description and in any position unreinforced complete all as specified and directed.
Taking down cement plaster on brick wall including raking out,joints hacking for key's scrubbing down with water complete all as specified and directed.
M&L for raking out joints/ pointing in cement mortar to squared rubble masonry, coursed or uncoursed complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches, pillars etc built in cement mortar complete all as specified and directed..
Excavation over areas, not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.
M&L for hardcore of gauge not exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block glossy finished, chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 30mm to 40mm thick sand cushioning complete all as specified and directed.
M&L for mirror polishing existing Kota stone flooring including filling all existing cracks and jointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for mirror polished machine cut Kota stone slab flooring 18mm to 20mm thick laid over and including 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors laid over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed..
All as per Srl item No. 14 above but in dado / skirting etc. over and including 10mm thick rendering in CM (1:4) -ditto-.
M&L for black Granite stone 18mm to 20mm thick machine cut, bedding & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type laid over and including 15mm thick screed bed in CM 1:4 as in cooking plaform, window cill complete all as specified and directed.
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar complete all as specified and directed.
M&L for glazed ceramic tiles of size 600mmx300mmx7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.
S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24mm x 38mm x 0.60mm, Tee Section ( bottom pre coated ) and 24mm x 24mm x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instructions as in ceiling with and including S&F white Non Asbestos designer ceiling cement boards 4 mm thick including including dismantling of wall ceiling board (fibre,pulp,insulation etc) or insulation board/slab/blankers,any thickness including cover fillets complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed
M&L for PCC 1:2:4, type B2 (using 40mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed
M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping, benching,saucer drain and other similar work with weathering slightly rounded edges and throating etc as req with and incl all necessary form work complete all as specified and directed
M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregates), 100mm thick as in sub base complete all as specified and directed
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges including filling of joints with bituminous compound complete all as specified and directed
M&L for two coat cement plaster ,first coat 15mm thick CM 1:6 on brick wall surfaces and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed (Note:-WPC shall be measured and paid seperately under respective item).
Supply only integral WPC complete all as specified and directed
M&L for rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & fair complete all as specified and as directed
M&L for providing precast cement concrete 1:1.5:3, type B1 (using 20mm graded stone aggregates) as in kitchen platform slab, shelf slab, manhole cover slab etc including necessary form work etc., complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.
M&L for mild steel TMT bars 10mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed
S&F in replacement 25mm bore MS chromium plated conduit drapery rods, suitable for door/widows curtain with dooms with brackets fitted to each end and fixed to wall including making good the disturbed surfaces complete all as specified and directed
Taking down chowkats/frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed
Taking down chowkats/frames of area exc 1.5 Sqm and n.exc 4.0 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed .
M&L for pressed steel frames for doors 105mmx60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6, type C0 (using 12.5mm graded stone aggregates) complete all as specified and directed
S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed
S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed.
S&F steel window with side hung shutters without glazing bars and fixed to steel frame -ditto-
M&L for cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed .
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 200 mm complete all as specified and directed .
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300 mm complete all as specified and directed.
S&F Aluminium handles, cast type, anodised, size of handle 150mm complete all as specified and directed
S&F steel work in purlins/rafters/posts with round/ rectangula/ square hollow mild steel section complete all as specified and directed
S&F pre-painted Galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick, trapezoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheetingof any gauge/thickness complete all as specified and directed.
S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed
S&F mild steel plates (plain or chequred) channels, square cut or notched forming holes, with riveted, bolted, welded attachement confirming to Fe 410 - W (Gde-E-250) quality-B complete all as specified and directed .
S&F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 11 to 15mm and length exc 10cm and not exc 15cm long complete all as specified and directed
S&F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 16 to 20mm and length exc 22.5cm and not exc 30cm complete all as specified and directed
S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work coniforming to Fe.290.Gde-E-165 complete all as specified and directed
M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and directed
M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation new untreated steel of surface of any description, not exc 10 cm in width or girth for wind ties complete all as specified and directed
M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M&L for applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces of walls and applying two coat of acrylic distemper over a coat of interior primer including preparation of new wall surfaces of walls complete all as specified and directed
M&Lfor complete removal of existing treatment and applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces of walls and applying two coat of acrylic distemper over a coat of interior primer incl. preparation of surfaces of walls complete all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying two coats exterior emulsion paint over one coat of exterior primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE
S&F for mild steel work like flat iron including all necessary drilling,screwing, bolting , reveting & welding, etc and similar work conforming to Fe-290 Gde E-165 for wind ties,gutter strap and frame for cladding complete all as specified and directed
S&F in repairs 110mm bore PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall or in trenches including mild steel clamps complete all as specified.
Removing excavated materials (soil) to a distance not exc. 150m and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and directed
S&F in repairs PVC (SWR) bends 110mm dia complete all as specified and directed
S&F in repairs PVC (SWR) 110mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed
S&F in replacement GI tubing 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F in replacement GI tubing 20mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F in repairs C P bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F in repairs angular stop valve, 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.
S&F in repairs vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.
S&F solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet on the front face & 4mm prelam PVC sheet on back face complete all as specified and directed.
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed..
S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.
S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of 1000 Ltrs Capacity complete all as specified and directed.
M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed.
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead including taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed:-
One light, fan point controlled by one switch
One 5 Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No.79 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated , sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-
S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed
S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed
S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed
S&F ceiling rose, surface backlit,three terminal complete all as specified and directed
S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed
S&F modular fan step regulator upto 120W, suitable for BEE 5 Star rated fan complete all as specified and directed
S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
All as per Srl item No.89 above but SPN 63 Amps, 240 V
S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed
S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed
S&F MCCB 100 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed
S&F LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:-Havells Cat Part No LHEXBLP7PN1W020, 4 feet or equivalent make as specified in Appendix 'C' of Particular Specifications
S&F in replacement of conventional recess mounted fitting to LED 2' X 2' ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make-Havells cat part No PLANO2X2PLR36WLED857S or equivalent make as specified in Appendix 'C' of Particular Specifications
S&F LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part No LHEXCGP7UN5W013 or equivalent make as specified in Appendix 'C' of Particular Specifications
S&F concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed
S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7IN1W009 or equivalent make as specified in Appendix 'C' of Particular Specifications
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting & making good in all aspects complete all as specified and directed. Make -Bajaj Maxima DXI 300mm/CG Trans Air 12"/ Havells Ventil Air-DS
S&F ceiling fan 1200 mm sweep metallic white colour with BEE 5 Star rated, single phase and connecting up including provision of cable from ceiling rose or connector to fan and including hanging fastner/clamp complete all as specified and directed. Make - Havells/Bajaj/CG
Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 70 sqmm 3.5 core complete all as specified and directed
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable and getting out in hard / dense soil complete all as specified and directed.
M&L for sand cushioning in trenches for the cable etc complete all as specified and directed
Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed
Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and directed.
Supplying and laying kiln burnt bricks sub class 'B' laid in trenches for cable protection complete all as specified and directed
S&F in replacement of GI Pipe light grade 80 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed
M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.
M/s VIKAS TRADERS
NIHAL ENTERPRISES
maharaja construction and suppliers
SAGAR MOTOR AND TRACTOR CO
siddhant construction
pal enterprises
M/S vikas jain
v k builder
HAFEEZ CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .