Repair/Maint of Starter, Control Panels, Pumping System, Switchgear, Pipeline and Valves at ASC, Engr Regt and Other Locations under GE (Utilities) Udhampur

Amount

Supply , fixing, commissining and testing in replacement of soft starter panel suitable for 270 HP induction motor pump set as per existing with over load,over voltage,onder voltage,single phase,short circuit and thermal protection for starter and motor, protection to soft starter. PaneL should be IP45 protection with provision of cable inlet/out let, Panel comprises of soft starter,relay,contactor,semi contactor fuses and all accessories as per manufacturer recomendation.Complete all as specified and directed by Engr-in-charge.

All as per serial item No 1.00 here-in- before but of size 170 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 1.00 here-in- before but of size 150 HP complete all as specified and directed by Engr-in-Charge.

Supply , fixing, commissining and testing in replacement of Fully automatic star delta motor starter 100 HP in sheet steel enclosure type HGS series with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 100 HP . Complete all as specified and directed by Engr-in-charge.

All as per serial item No 4.00 here-in- before but of size 75 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 4.00 here-in- before but of size 60 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 4.00 here-in- before but of size 50 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 4.00 here-in- before but of size 30 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 4.00 here-in- before but of size 20 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 4.00 here-in- before but of size 15 HP complete all as specified and directed by Engr-in-Charge.

S&F in replacement of DOL starter in sheet steel enclosure type for 1 to 7.5 HP, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of slipring made of copper suitable for as per existing model 250/200 HP motor, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in- before but of size 170 HP, complete all as specified and directed by Engr-in-Charge.

M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 185 sqmm inculding taking down existing old unserviceable cable, complete all as directed by Engr -in-charge.

All as per serial item No 14.00 here-in- before but of size 120 sqmm, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 14.00 here-in- before but of size 50 sqmm, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 14.00 here-in- before but of size 30 sqmm, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of OFF load change over switch 1250 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 18.00 here-in- before but of size 800 Amps, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 18.00 here-in- before but of size 630 Amps, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 18.00 here-in- before but of size 400 Amps, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 18.00 here-in- before but of size 200 Amps, complete all as specified and directed by Engr-in-Charge.

M&L for replacement of MCCB 400 Amps breaking capacity 45 KA, 415 Volt, Ics 100 % of Icu 50 HZ conforming to IEC-60947, 3 pole with adjustable thermal and fixed magnetic setting including taking down old unserviceable one, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 23.00 here-in- before but of size 630 Amps, complete all as specified and directed by Engr-in-Charge.

S&F in replacement copper tube (Thimbles) terminal heavy duty of size 35 Sqmm . Complete all as specified and directed by Engr-in-Charge.

All as per serial item No 25.00 here-in- before but of size 120 Sqmm. Complete all as specified and directed by Engr-in-Charge.

All as per serial item No 25.00 here-in- before but of size 95 Sqmm. Complete all as specified and directed by Engr-in-Charge.

All as per serial item No 25.00 here-in- before but of size 185 Sqmm. Complete all as specified and directed by Engr-in-Charge.

S&F packing sheet made of PVC 6 mm thick, Complete all as specified and directed by Engr-in-charge

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of hard/dense soil. Complete all as specified and directed by Engr-in-Charge.

Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick, complete all as specified and directed by Engr-in-Charge.

Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

Taking up or down GI pipe of following sizes including all fittings, complete all as specified and directed by Engr-in-Charge.

Bore of pipe 100mm dia

Bore of pipe 80mm dia

Bore of pipe 50mm dia

Bore of pipe 40mm dia

Bore of pipe 25mm dia

Bore of pipe 20mm dia

Refixing GI/CI pipe obtained from Item No. 33 above and connections in new or old position (walls, trenches, ceiling and floors etc.) of following sizes, Complete including main/branch connections, Complete all as specified and directed by Engr-in-Charge.

Bore of pipe 100mm dia

Bore of pipe 80mm dia

Bore of pipe 50mm dia

Bore of pipe 40mm dia

Bore of pipe 25mm dia

Bore of pipe 20mm dia

Supply & fixing only GI pipes in repair of following sizes, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.

Bore of pipe 100mm dia

Bore of pipe 80mm dia

Bore of pipe 50mm dia

Bore of pipe 40mm dia

Bore of pipe 25mm dia

Bore of pipe 20mm dia

Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items :-

Stem bush

Gland flange cast iron

Stud/Bolt carbon steel

Stem nut/chaknut

Stem Stain less steel

Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items :-

Stem bush

Gland flange cast iron

Stud/Bolt carbon steel

Stem nut/chaknut

Stem Stain less steel

Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items :-

Stem bush

Gland flange cast iron

Stud/Bolt carbon steel

Stem nut/chaknut

Stem Stain less steel

Supply and fix in replacement cast iron sluice valve of following sizes (PN 1.6) ISI Marked with iron wheel head both end flanged, steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers etc, including taking down the old existing, complete all as specified and directed by Engr-in-Charge.

As per Ser item No 39.00 here-in-before but 200mm dia, Complete all as specified and directed by Engr-in-charge.

As per Ser item No 39.00 here-in-before but 150mm dia, Complete all as specified and directed by Engr-in-charge.

Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore. Complete all as specified and directed by Engr-in-charge

Supply and fixing rubber gasket including replacement old UNSV gasket for 300/250 mm, Complete all as specified and directed by Engr-in-charge. Note:- (i) Contractor fully responsible for necessory excavation for replacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.

Supply and fixing rubber gasket including replacement old UNSV gasket for 200/150 mm, Complete all as specified and directed by Engr-in-charge. Note:- (i) Contractor fully responsible for necessory excavation fo rreplacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.

M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 250 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth, Complete all as specified and directed by Engr-in-charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra fittings/pipe will be measured and paid separately.

All as per Ser item No 43.00 here-in-before but of dia 200 /150mm bore pipe, Complete all as specified and directed by Engr-in-charge.

Material and labour for repair to leaking flanged/circular welding joints of 80 to 150 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth, Complete all as specified and directed by Engr-in-charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra pipe will be measured and paid separately..

Demolition of existing valve pit chamber , M&L for masonry valve pit of any size internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer, Complete all as specified and directed by Engr-in-charge.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pump,pole & stay, Complete all as specified and directed by Engr-in-charge.

M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, Complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of gun-metal, globe or gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing, Complete all as specified and directed by Engr-in-charge.

All as per Ser item No 49.00 here-in-before but of dia 40 mm gate valve, Complete all as specified and directed by Engr-in-charge.

All as per Ser item No 49.00 here-in-before but of dia 25 mm gate valve, Complete all as specified and directed by Engr-in-charge.

All as per Ser item No 49.00 here-in-before but of dia 20 mm gate valve, Complete all as specified and directed by Engr-in-charge.

All as per Ser item No 49.00 here-in-before but of dia 15 mm gate valve, Complete all as specified and directed by Engr-in-charge.

Material and labour for taking down by scraping and preparation the surface of the header approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer , etc, Complete all as specified and directed by Engr-in-charge.

Material and labour for repair of valve pit chamber of any size with necessary brick work, cement mortar / plastering in brick work,PCC ,welding work of hinges and MS sheet cover,painting on welding works ,MS sheets and plastered surface, Complete all as specified and directed by Engr-in-charge.

Material and labour for fabrication of MS sheets ,angle iron in replacement of old pit cover with necessary welding work and one coat of red oxide primer to the welded works and painted with black enamel paint, Complete all as specified and directed by Engr-in-charge.

Material and labour for DI fittings suitable for socketed / spigot ,flanged /socketed suitabe upto 250mm bore as per IS 9523, with inside cement mortar lining and out side zinc coating with finishing layer of black bitumen, Complete all as specified and directed by Engr-in-charge.

M& L for complete dewatering and cleaning of overhead MS tank of capacity Maximum upto 20 KL gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat food grade paint to wall , floor and ceiling , internal surface of reservoir where applicable, Complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair to GI fittings medium grade ISI marked including cutting, screwing etc including taking down, Complete all as specified and directed by Engr-in-charge.

Elbow 15mm

Elbow 20mm

Elbow 25mm

Elbow 40mm

Elbow 50mm

Socket 15mm

Socket 20mm

Socket 25mm

Socket 40mm

Socket 50mm

Union 15mm

Union 20mm

Union 25mm

Union 40mm

Union 50mm

Union 80mm

Elbow reducer 20 x 15mm

Elbow reducer 25 x 20mm

Elbow reducer 40 x 25mm

Socket reducer 15x20mm

Socket reducer 25x20mm

Socket reducer 40x25mm

Socket reducer 40x20mm

Socket reducer 50x25mm

Nipple 15 x50mm

Nipple 15 x 75 mm

Nipple 15 x 100 mm

Nipple 15 x 150 mm

Nipple 20 x50mm

Nipple 20 x 75mm

Nipple 20 x100mm

Nipple 20 x 150mm

Nipple 25 x 50mm

Nipple 25 x 75mm

Nipple 25 x 100mm

Nipple 40 x 50mm

Nipple 40 x 100mm

Nipple 40 x 150mm

Nipple 50 x 50mm

Nipple 50 x 100mm

Nipple 50 x 150mm

Tee 15mm

Tee 20mm

Tee 25mm

Tee 20x15mm

Tee 25x20mm

Tee 40x15mm

Tee 40x20mm

Tee 40x25mm

Tee 50x25mm

Dead plug 15mm

Dead plug 20mm

Dead plug 25mm

Dead plug 40mm

Dead plug 50mm

Spunyarn

Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed of dia 15 mm(Minimumweight 15mm-142gms, Complete all as specified and directed by Engr-in-charge.

All as per Ser item No 60.00 above here-in-before but of dia 20mm Minimum Wt- 210 gms, Complete all as specified and directed by Engr-in-charge.

All as per Ser item No 60.00 above here-in-before but of dia 25mm Minimum Wt- 455 gms, Complete all as specified and directed by Engr-in-charge.

All as per Ser item No 60.00 above here-in-before but of dia 40mm Minimum Wt- 690 gms, Complete all as specified and directed by Engr-in-charge.

Carry out Servicing from authorised rep or service engineer of the manufacturer of Industrial R.O+U.V. Water purifier system consisting of Fiber Reinforced Polymer Vessel with treatment media like FBM, AFM, MGS, ACM, CPM, etc of capacity 1000 LPH, Complete all as specified and directed by Engr-in-charge.

Attending Complaints for rectification of fault in RO i panel (contorl Panel) of Industrial R.O+U.V. Water purifier system consisting of Fiber Reinforced Polymer Vessel with treatment media like FBM, AFM, MGS, ACM, CPM, etc of capacity 1000 LPH including replacement of worn out relay, cable, fuse,diode etc, Complete all as specified and directed by Engr-in-charge.

Supply and fix and testing food grade Activated carbon for RO plant of capacity 1000 LPH, Complete all as specified and directed by Engr-in-charge.

Supply and fix and testing food grade softner Resin 220 Na for RO plant of capacity 1000 LPH, Complete all as specified and directed by Engr-in-charge.

Supply and fix and testing 20" Jumbo Span Candel for RO plant of capacity 1000 LPH, Complete all as specified and directed by Engr-in-charge. (Note : Model should be compatable for existing RO plant)

Supply and fix and testing RO Membrane 40 x 60 for RO plant of capacity 1000 LPH, Complete all as specified and directed by Engr-in-charge. (Note : Model should be compatable for existing RO plant)

Supply and filling clean wash sand for RO plant of capacity 1000 LPH, Complete all as specified and directed by Engr-in-charge.

Supply and filling (NaCl) (Common Salt) for RO plant of capacity 1000 LPH, Complete all as specified and directed by Engr-in-charge.

S&F UV lamp suitable for 1000 LPH RO of input voltage 110 V/220V as per existing size, Completed all as specified and directed by Engr-in-charge.

S&F TDS Controller for RO Plant 1000 LPH with inlet and outlet connection for RO Plant, Complete all as specified and directed by Engr-in-charge.

EAST URBAN ENGINEERING (BID ID -3203908)