PROVISION OF SECURITY LIGHT ALONG THE ROAD FROM AEPTA CHOWK TO NO 2 TRG BN DRIVING TRACK OF 1 ATC OF ASC CENTRE NORTH 1 ATC AND STREET LIGHT AT VARIOUS LOCATION OF ASC CENTRE SOUTH 2 ATC UNDER GE CENTRAL BANGALORE

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc area not exceeding 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

All as per item No 1 above but exc 1.5 metre and not exc 3.0 metre deep.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M & L for Sand cushioning and covering with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying well burnt bricks, locally available best quality bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

Provision of trenchless bore using mechanical nuematic drilling equipment for passing electric cables through HDPE pipe of 100mm dia under the existing bituminous/WBM road/PCC hard standings, depth range not less than 1.0 mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with its existing specifications all as specified and directed by engr-in-charge at site. Note : 1. Quoted rates deems to be inclusing of necessary earth work, transportation charges of Drilling machine, and cost of HDPE pipe and passing pipe through bore complete. 2. Any damage to MES assets caused during trenchless bore shall be recitfied by the contractor at his own cost.

S&F in replacement mild steel galvanized pipe light grade for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 40mm bore dia.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI wire armoured cable for working voltage 1100 volts, 4 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, working voltage upto 1100 Volts, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, 2 core, nominal cross sectional area of main conductor 16 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, 4 core, nominal cross sectional area of main conductor 16 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, PVC insulated, 4 core, nominal cross sectional area of main conductor 25 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply and fixing 200 Watts LED energy saving, environmental friendly long life exclusive innovative die-cast aluminium IP- 66 flood light with higly efficient LEDs as light source suitable for highlighting architectural features highmast and general purpose lighting including all acessories for fixing on pole/wall, electrical connection complete including testing on completion as directed. MAKE: HAVELLS Cat No JETAVALOURFL200WLED757PINTWBLTG or equivelent of Wipro/Philips/CG/Surya Rashni /BAJAJ

Supply and fixing LED street light (ENDURA PEARL NEO of Havells make)new generation energy saving and environmental friendly long life pressure die-cast powder coated LED street light 60 Watt, IP 66 protection, deep drawn MS housing in grey finish with clear acrylic and cast aluminium pipe mounting attachment and consisting of all acessories, prewired, making necessary connection including testing on completion as directed. MAKE: HAVELLS Cat No ENDURAPEARLNEOSL60WLED757PASYTOPC or equivelent of Wipro/Philips/CG/Surya Rashni /BAJAJ

S & F Street light bracket arm of length not less than 1.5 m made out of GI tubing, 32 mm bore, light grade fixed to pole, etc with two pair mild steel flat iron 40X5mm clamp suitable for steel tubular electric pole, suitable nuts, bolts, washers including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and directed.

Material and labour for PVC insulated weather proof copper conductor cable drawn into pole of size 3 core flexible multistranded copper cable, 2.5 sqmm for connection of security / street light fitting from junction box including making proper connection using suitable size thimbles/lugs complete all as directed.

S&F street light thermoplastic cable Junction box made of SMC/FRP of size 200x255x112mm, IP-66, weather proof for outdoor use with TPN terminal and with MCB SP, 6-32A, 10 KA, 'C' Curve, 01 No and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel clamps, nuts & bolts complete all as specified and directed. (Make - Hensel, CAT No : KF 2525 or equivalent model of make as per list of manufacturer attached).

S&F in repairs Modular Junction box made of SMC/FRP of size 345X480X210mm, IP-66, with single door hinge type opening and locking arrangement, including provision of copper/aluminium bus bar 4 wire 415 volts on porceline base and including control with and including providing one MCB SP, 6-32A, 10 KA, 'C' Curve complete fixed to street light pole with suitable size of mild steel FI clamps, nuts & bolts complete all as specified and directed. (Make - Sintex, CAT No : GSJB 3750 or equivalent model of make as per list of manufacturer attached).

Fabricate, install and testing in replacement factory made, CPRI approved, bus bar chamber, outdoor type, weather proof having both side openable hinged door shutters with locking arrangement, size of chamber 90cm x 60cm x 40cm made of 3mm thick CRCA sheet, powder coated paint inside and outside, welded with 4 Nos angle iron legs of size 40 x 40 x 6mm, 80cm long duly painted with two coats of black enamelled paint over a coat of red oxide primer and errected in PCC 1:3:6, type C2 foundation at suitable depth and having the following accessories:- (a) MCCB, 415 volts, 4 pole, 16 kA, 63 Amps Capacity with thermal load release relay- 1 No (for incoming). (b) MCCB, 415 volts, 4 pole, 16 kA, 32 Amps Capacity with thermal load release relay- 1 No (c) Bus Bar chamber with electrolite aluminium bus bar strip with heat shrinkable insulating sleeve, 100 Amp capacity 4 Nos of required length supported on FRP insulators, internal wiring for indicators with 10sqmm copper cable single core of required length. (d) Indicator lamps with LED bulbs for R,Y,B with copper cable wiring - 1 set (e) AStronomy timer switch with 32 Amps capacity 3 pole contactor with auto manual switch. (f) MCB TPN 63 Amps, 10 KA, 'C' curve - 01 Nos

Fabricate, install and testing in replacement factory, CPRI approved, made bus bar chamber, outdoor type, weather proof having both side openable hinged door shutters with locking arrangement, size of chamber 100cm x 70cm x 45cm made of 3mm thick CRCA sheet, powder coated paint inside and outside, welded with 4 Nos angle iron legs of size 40 x 40 x 6mm, 80cm long duly painted with two coats of black enamelled paint over a coat of red oxide primer and errected in PCC 1:3:6, type C2 foundation at suitable depth and having the following accessories:- (a) MCCB, 415 volts, 25 kA, 100 Amps Capacity with thermal load release relay- 1 No (for incoming) (b) Bus Bar chamber with electrolite aluminium bus bar strip with heat shrinkable insulating sleeve, 100 Amp capacity 4 Nos of required length supported on FRP insulators, internal wiring for indicators with 10sqmm copper cable single core of required length. (c) Indicator lamps with LED bulbs for R,Y,B with copper cable wiring - 1 set (d) Analog timer switch for street light control, 3 phase 24 hour programe, progamable every 15 minuite with 01 No 6 to 32 Apm capacity, 10 KA, 'C' curve, MCB 02 Nos (Alternate operation of street light) (e) Power contactor of capacity 63 Amps 3 pole 415 volts - 02 Nos (f) Auto manual switch - 02 Nos (g) MCB TPN 63 Amps, 10 KA, 'C' curve - 02 Nos

Supply & fix/errection in true vertical position 9.00 metre long steel tubular swaged pole complete with cast iron base plate , finial taper plug ,bolts, nuts & screws as specified type 410 SP -31 fixed in position including two coats of black bituminous painting externally upto planting depth and remaining portion two coats of aluminium paint over one coat of red oxide primer and making alternate black and white strips 30 cm height each (Total 5 strips), writing pole number (06 numbers letter/figure of 2" height) complete all as directed. NOTE :- Excavation and PCC works will be measured and paid seperately under respective items of BoQ.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded hard granite stone aggregate) in foundations for pole or in filling as directed by Engineer-in-charge.

PM&L for PCC 1:3:6 type C1 (using 20 mm graded hard granite stone aggregate) as in coping to Electric Pole including necessary form work and finishing the external surfaces of concrete with 10 mm thick plastering in CM (1:4) finished even and smooth complete all as directed. (Note Quoted rate is deemed to be inclusive of form work and plastering complete.)

Material and labour in repair for earthing complete with galvanized steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth strip of 25 x 4 mm up to test point by means of nuts, bolts, check nuts and washers of GI including excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 32 mm bore GI pipe, light grade for protection of earth strip, MS angle iron frame 40x40x3mm , 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 6 mm dia MS bars @ 75 mm C/C both ways and with MS handle made out of 12 mm dia bars, funnel , wire mesh etc complete all as shown in electrical plate No 5 of SSR part-I and connected to earthing test point all as specified or indicated including testing on completion complete. NOTE :- Qouted rate shall deemed to be included 7.50 metre long earth trips.

NAVREET CONSTRUCTION

M/S - KRUPA ELECTRICALS

RAMSON TRADERS

Vishwas Enterprises

kamadhenu Electricals

RRK PROJECTS

M.G. Enterprises

ABHISHEK CONSTRUCTIONS