Development and Rejuvenation of Daddakere Laka. TP Kalghatagi Dharwad District Under Amrut 2.0

Development and Rejuvenation of Doddakere Lake, TP Kalghatgi, Dharwad District Under AMRUT 2.0

SL No Ref Item Unit Qty Rate Amount

1 PWD SR 2023-24 Vol 3 Item No. 2.4 i (b) Page No.9 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Manual Means. In area of thorny jungle Sqm 90.75 1500 136125

2 Common SR 2023-24 Vol 4 Item No. 8.14 Page No.103 Removing and resetting disturbed dry rubble / size stone pitching 250 to 450 mm thick including packing and wedging with stone chips, finishing surface with all other ancillary operations complete. Sqm 1530 95 145350

3 Common SR 2023-24 Vol 4 Item No. 3.41.2 Page No.54 Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing and all other ancillary operations complete. 300mm thick Cum 1020 455 464100

4 Common SR 2023-24 Vol 4 Item No. 3.3 Page No.47 Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete. Cum 3078.13 629 1936141

5 UNI SR 2024-25 V-1 P-5, IT-1.4.1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all inds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 1028.52 242 248902

6 Common SR 2023-24 Vol 1 Item No. 2.1.3 Page No.15 M10 - PCC- 40mm Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 104.13 5918 616241

7 Common SR 2023-24 Vol 2 Item No. 5.4 Page No.9 Size Stone Masonry Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 44.64 6364 284089

8 Common SR 2023-24 Vol 1 Item No. 2.1.4 Page No.15 M10 - PCC Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 7.44 6147 45734

9 Common SR 2023-24 Vol 4 Item No. 1.6 Page No.129 Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials machinery, labour, laying to specified slope, wedging with chips, finishing & all necessary works as directed and complete as per specification. Sqm 940 735 690900

10 UNI SR 2023-24 Vol 2 Item No 9.27 Page No- 63 (as per issued revise rate) Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 including cost of materials, mortar, labour, curing complete as per specifications. Sqm 63.90 2,384.00 152338

11 UNI SR 2024-25 V-2 ,P-85, IT-11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainlesssteel bolts etc., of required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 303.55 565.00 171506

12 UNI SR 2024-25 V-2 ,P-95, IT-11.59 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 4355.00 115.00 500825

13 Common SR 2023-24 Vol 1 Item No. 1.14.1 Page No.8 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 153 2682 410346

14 Common SR 2023-24 Vol 1 Item No. 2.2.3 Page No.15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 66.80 6849.7 457560

15 Common SR 2023-24 Vol 3 Item No. 12.1 Page No.117 Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications Mtr 6.75 138 932

16 Common SR 2023-24 Vol 1 Item No. 2.11.c Page No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Ton 7.55 76329 576131

17 For Bio - Fencing - Digging trench of size 1m x 0.30 m x 0.45m and filling 50%of the trench with top soil and remaining 50 trench with 1:2:3 proportion of sand (0.0112), FYM (0.0224cum) redearth (0.0336cum) and planting of well grown plants (excluding cost of plants) Forest Vol 8 SR.2022-23 Bengaluru, Item No 12.9 (a) Page No-49 Mtr 1960.00 100 196000

18 Plants for Bio-fencing Duranta erecta, Duranta Gold (The Nurserymen co-operative society Lalbhagh rates) Sqm 2352.00 76 179390

19 PWD Common SR 2023-24, Vol 3, Page No 63, Item No. 8.1 b Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 PCC M20 grade for kerb Cast in Situ Mtr 2200 265 583000

20 Common SR 2023-24 Vol 3 Item No. 3.7 Page No.17 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. Sqm 420 105 44100

21 Common SR 2023-24 Vol 3 Item No. 3.6 Page No.17 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Cum 420 493 207060

22 Common SR 2023-24 Vol 1 Item No. 2.2.3 Page No.15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 148.35 6538.35 969964

23 Common SR 2023-24 Vol 1 Item No. 2.2.3 Page No.15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 25.20 7472.4 188304

24 Common SR 2023-24 Vol 1 Item No. 2.4.3 Page No.16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9.60 9340.5 89669

25 PWD SR 2023-24 ,Vol-2,Page No 83, Item No.11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 34342 147 5048274

26 PWD SR 2023-24 Vol 2 Item No. 11.59 Page No.95 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer in-charge. (Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade) Sqm 2200 841 1850200

27 UNI SR 2024-25 V-1 P-15, IT-2.1.5 (as per revised rate) Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates Cum 0.65 6079.00 3939

28 UNI SR 2023-24 V-1 ,VOL-1 P-16, IT-2.4.4 (as per revised rate) Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - do - M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 1.38 6824.78 9398

29 UNI SR 2024-25 V-1 , P.18, Sl no.2.11.h (as per revised rate) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Cum 0.10 69749.00 6723

30 UNI SR 2024-25 V-2 ,P-84, IT-11.25.2. Providing and fixing Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge Kgs 833.04 136.00 113293

31 (CSOR 2023-24, Vol-6, PWD ELECT, P-11/105, I-4.2.1) Fabricating, supplying and erection of... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to with stand the wind speed of 47m/s for.......m Pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom.....mm,top....mm with 3mm thick, suitable base plate and 4 Nos of.....long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM- -A123 and 153 etc., (excluding foundation) as per drawing appended 1) 03 meters - Top 70 mm and bottom 130 mm dia Each 32 6300.00 201600

32 (CSOR 2023-24, Vol-6, PWD ELECT, P-42/105, I-11.7.2) LED Post Top Lantern GARDEN Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clearglass material, delivering superior light output Rated life Burning Hrs 50000 hr@Lumen Maintenance of 70%, CCT>5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire>IK08. PowerFactor>0.9 with mains, Surge Protection-Min 5 KV along with Overvoltage/Overload, shortcircuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40 mm to 50 mm. Universal Voltage driver to operate wide voltage range from 100V to 270V50/60 Hz application. Compliance to IS 10322 / IEC 60598, LM7 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency>1301m/w, nominal CRI>75. Luminaire manufacturer should havein-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier wordmark/name shall be Engraved/Embossing on the die cast housing/Bodypart. Warranty of 2 Years against any manufacturing defect working understandard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osrammake LED Source. 2)LED Post Top Lantern with 25/30 W Each 32 7722.00 247104

33 (CSOR 2023-24, Vol-6, PWD ELECT, P-56/105, I-13.6) Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wires. Each 32 198.00 6336

34 (CSOR 2023-24, Vol-6, PWD ELECT, P-05/105, I-2.3.3) Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. 2.5 sqmm P/Mtr 160 42.00 6720

35 (CSOR 2023-24, Vol-6, PWD ELECT, P-16/105, I-5.14.6) Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.4) 100 Amps Each 6 16606.00 99636

36 (CSOR 2023-24, Vol-6, PWD ELECT, P-17/105, I-5.18.4) Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps DP Each 4 739.00 2956

37 (CSOR 2023-24, Vol-6, PWD ELECT, P-20/105, I-5.40.1) Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 1) 100Amps (4x30x6 mm Aluminum Strips) P/Mtr 0.3 2465.00 740

38 (CSOR 2023-24, Vol-6, PWD ELECT, P-20/105, I-5.41.2) Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 2)50x50x6 mm P/Mtr 32 395.00 12640

39 (CSOR 2023-24, Vol-6, PWD ELECT, P-20/105, I-5.42.1) Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.1).14SWG Sqcm 30000 0.50 15000

40 (CSOR 2023-24, Vol-6, PWD ELECT, P-21/105, I-5.48) Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Each 3 4843.00 14529

41 (CSOR 2023-24, Vol-6, PWD ELECT, P-54/105, I-12.56) Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Each 2 3510.00 7020

42 (CSOR 2023-24, Vol-6, PWD ELECT, P-14/105, I-5.7.3) Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 3) 63Amps Each 4 401.00 1604

43 (MPPWD 2023-24, ELECT, P-118, I-41.08) Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 2.5 sqmm Each 160 30.00 4800

45 25 sqmm Long Barrel Each 25 42.00 1050

46 (CSOR 2023-24, Vol-6, ESCOM, P-13/81, I-32.05) Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A. 4 core 16 sqmm P/Mtr 352 141.84 49928

47 3.5 core 25 sqmm P/Mtr 50 139.55 6977

48 (CSOR 2023-24, Vol-6, ESCOM, P-52/81, I-21.05) Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct 1)2.5 sqmm to 25 sqmm. P/Mtr 352 20.89 7352

49 2).25 sqmm to 75 sqmm P/Mtr 50 20.89 1044

50 (CSOR 2023-24, V-1,Page No. 6, Item No. 1.6.1) Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. P/Mtr 352 290.40 102221

51 (CSOR 2023-24, Vol-6, ESCOM, P-56/81, I-28.08) Laying the GI Pipe 80 mm to 150 mm dia at Pole/Wall/Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting P/Mtr 15 93.00 1395

52 (CSOR 2023-24, Vol-6, PWD ELECT, P-03/105, I-1.9.1) Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 20mm Mtr 15 19.00 285

53 (CSOR 2023-24, Vol-6, PWD ELECT, P-09/105, I-3.13.1) Supplying and fixing of metal clad industrial plugs and sockets. SOCKET 2 Pole + Earth 250V plug 16 Amps Each 5 387.76 1939

54 (CSOR 2023-24, Vol-6, PWD ELECT, P-18/105, I-5.20.1) Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.1).16-25 Amps 2 pole Each 1 4277.00 4277

55 UNI SR 2024-25 V-1 P-5, IT-1.4.1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all inds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 25 242.00 6071

56 (PWD Vol 1 SR.2023-24, Item No 2.2.1 Page No- 15) Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cu MTR 25 6184.00 155144

57 Supply, Transportation, Installation of Mild Steel (MS) Park Benches with Nano-CoatedWooden Finish (Teak/Rosewood Grains).The MS benches are manufactured from mild steel. The benches are treated with metal epoxy primer, jet black coating, and nano-coated with clear wooden finish Teak/Rosewood grains. The final finish is between 70 to 90 microns, made to endure corrosion, rust, oxidation, and is also protective against UV damage. The bench is made to withhold a seating capacity of 225 kgs. The benches are composed of 2mm thick 20x40mm pipes for the seat and 20x40mm for the backrest, with 7 pipes for the seat and 6 pipes for the backrest. The hand rest is made of a 20x40mm pipe, positioned 01 24" from ground level. The base plate is 80x80x6mm, with 4 plates per bench. The armrest will be curved on both ends, measuring 2ft in length each, joining the legs of the bench. Each leg of the bench will have a 4" diameter plate at the base. The grouting will be 6" into the surface. The dimensions of the bench are oft in length, 2ft in depth, and 3.6ft in total height, including the backrest. The seat height from the ground is 18", and the backrest height is 18". The manufacturer must possess a valid ZED (Zero Defect Zero Effect) Nos 32.00 14000.00 448000

58 Vide SE DMA approved Rates Supply, Transportation, Installation of Plastic Pole Hanging Dustbins, Frame: Mild Steel, Black Powder Coated, Dustbin: High Density Polyethylene Plastic, Height of the stand: 40 inches, Colours: Green/Blue/Red/Yellow, Capacity: 80 Liters, Brand: Aristo or Equivalent make Nos 5 2830 14150

59 Vide SE DMA approved Rates Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances., complete. Size 900 mmx1100 mm Nos 1 6157 6157

60 Supply and Fixing of Puppy Dog Rider / Elephant Rider / Horse Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The EN 1176 certificates must be in the name of a supplier who has carried out public park projects in India either by themselves or through their dealers or contractors. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. The rider is of size 0.9 m x 0.4 m x 0.55 m, Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety feature. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 0.9 m x 0.40 m x 0.45 m Nos 1.00 69806 69806

61 Supply & Fixing of Two Seater See Saw : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia 114 mm. It consists of 2 seats which is made of LLDPE virgin plastic of size 364 mm X 250 mm X 180 mm. Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety feature against protruding hardware, aesthetic pleasing against ugly exposed hardware and prevention against vandalism as well. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 1.6 m x 0.5 m x 0.8 m Nos 1.00 92068 92068

62 Supply & Fixing of A Swing:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out public park projects in India either by themselves or through their dealers or contractors. All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. “A” Shaped support posts of height 2.1 m are to be schedule Galvanized steel with a 80mm OD {Outer Diameter}. Toprail of length 2.58 m and Dia 76 mm shall be an all-robotic welded unit, fabricated from O.D. galvanized steel pipes. Flat Swing seat of size 440 mm x 150 mm x 30 mm, Bucket Swing seat of size Dia 325 mm and height 245 mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 2.75 m x 1.5 m x 2.1 m. Nos 1.00 104319 104319

63 Supply and Fixing of Merry Go Round DX: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Merry go round consists of a round platform which is made of galvanized steel and has a thickness of 2.5 mm. It is also power coated with the thickness of 2.5 mm. It is of Dia 1210 mm. It has 3 inverted “L” shaped handrails which is made of Galvanized steel and of dimensions as 474 mmx 815 mm. It has thickness of Dia 32 mm. The 3 handrails are separated exactly. All the 3 handrails are connected to the Centre with the help of a rod which is also made of Galvanized steel and of Dia 48 mm and height 815 mm. The supplier must have carried out public park projects in India either by themselves or through their dealers or contractors. The rates are inclusive of all taxes, transportation charges and installation. ALL COMPONENT MEET WITH EN-1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: Dia 1.21 m Nos 1.00 108873 108873

64 Supply & Fixing of Four Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, all products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia114mm.It consists of 4 seats which is made of LLDPE virgin plastic of size 364 mm X 250 mm X 180 mm. Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps.All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 2.60 m x 0.5 m x 0.7 m Nos 1.00 111171 111171

65 Supply and Fixing of ( INFINITY BOWL ) : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The infinity bowl was designed to sit at an angle. This, paired with the dipped edge feature, allows ease of transfer. The deep bowl area provides supportive and comfortable seating for all users. The angle enables the bowl to self-propel. A child need only shift their weight slightly to get the bowl moving. The Infinity Bowl encourages both independence and cooperation when playing.Dipped access point, silver sparkle finish.Galvanised and Powder Coated steel bowl.Spinning, supportive movement, self propelled movement.All Joints are Robotic Welded. Dimensions Dia:- 0.72 m Nos 1.00 165375 165375

66 Supply & Fixing of 150 CM Slide: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, all products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. “A” shaped support posts of height 2.28 m, are to be schedule Galvanized steel with a 60mm OD {Outer Diameter}. Deck of size 0.80 m x 0.60 m and Staircase of size 1.84 m x 0.60 m shall be an all-ROBOTIC welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of height 1.9 m and Dia 32 mm shall be an all-robotic welded unit, fabricated from 32 O.D. galvanized steel pipes. Wavey Slide of size 2.95 m x 0.72 m x 1.72 m. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 4.18 m x 0.89 m x 2.28 m Nos 1.00 331415 331415

67 Supply and Fixng of Arm and Pedal Bike: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, all products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal Structural post of length 1.10 m supporting Upright structural posts of height 1.23 m and Dia 60mm is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Pedals of size 108 mm & Bars of size 197 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.43 m x 0.65 m x 1.23 m Nos 2.00 136526 273052

68 Supply and Fixng of Bicycle: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, allproducts must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.31 m is to be schedule HOT DIP Galvanized steel with a 60 mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Pedal of size 113mm x 40mm & Rotating Disc of Dia 380 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Welded. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.11m x 0.51 m x 1.31 m Nos 2.00 138502 277004

69 Supply and Fixng of Big Shoulder Wheel: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, all products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.47 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 0.69 m and Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.69 m x 0.61 m x 1.94 m Nos 1.00 107326 107326

70 Supply and Fixng of Leg Stretch: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, all products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.10 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Handrail rails of Dia 32 m. The poles are welded on to a base plate made from steel with 114mm inner diameter. Welded. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.93 m x 0.81 m x 1.13 m Nos 1.00 53916 53916

71 Supply and Fixng of Tai Chi Spinners: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, all products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.15 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 477 mm made with the pipe Dia of 32 mm fabricated from 32 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.25 m x 1.09 m x 1.49 m Nos 1.00 110737 110737

72 Supply and Fixng of Double Health Walker: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, all products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. The Standing Bars of size 0.975 m and Dia 60 mm and the Handrail of size 1.93 m x 0.41 m and Dia 38 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 2.13 m x 0.55 m x 1.25 m Nos 1.00 193039 193039

73 Supply and Fixng of Mini Ski: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, all products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.40 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. The Standing Bars 991 mm and Dia 60 mm fabricated from 40 O.D. galvanized steel pipes Upper part of Support Handrails of size 1.04 m high and Dia 38 mm fabricated from 40mm O.D. and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.07 m x 0.78 m x 1.40 m Nos 2.00 137592 275184

74 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. -do- In all kinds of soils Depth upto 3 m. (PWD Vol 1 SR.2023-24 Item No 1.14.1 Page No- 8) Cum 1.81 107.1 194

75 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. -do- Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 15.71 6527.85 102579

76 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) -do- 600 x 300 x 150 mm size. (PWD Vol 3 SR.2023-24, Item No 8.42.3 Page No- 74) Rmt 40 486.15 19446

77 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (PWD Vol 1 SR.2023-24, Item No 2.11 h, Page No- 18) Ton 0.88 82961.55 73180

78 Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface prepration. (PWD Vol 3 SR.2023-24, Item No 8.52 Page No- 78) Rmt 40 309.75 12390

79 Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification. Rmt 100 978.6 97860

Core item Total Amount (Excluding GST) 20336942

Total Amount (Incliding GST) 23997592 24000000

Round Off amount 2408

Total amount 24000000

Centage charges 1728640

OPERATION AND MAINTENANCE OF LAKE

80 LABOUR RATES FOR THE PREPARATION OF UNI SR 2024-25 V-1 , A-49, III.SEMI-SKILLED LABOUR,ZONE-II Providing cleaning Labour (SEMI SKILLED) for daily housekeeping activities such as cleaning of debris/floating waste from silt traps, sweeping of pathway, watering of plantation, maintaining of garden/lake, cleaning of toilets if any etc as per the directions of the Engineer in Charge of the work. Person 1825 600.90 1096643

O&M Total Amount (Excluding GST) 1096643

O&M Total Amount (Including GST) 1294038

Total Amount 27022678