Providing Architectural Lighting, Generator Arrangements and Power Cable Arrangements to the Newly Constructed Arulmigu Thiruvalluvar Sannithi at Mylapore, Chennai-04

Supply and fixing of LED down focus light of 15W 3000K, 24 deg beam angle with anchor fastener mounting bracket on the wall / ceiling with connections.

Supply and fixing of LED accent light light of 30W 3000K, 30 deg beam angle with anchor fastener mounting bracket on the wall / ceiling with connections.

Supply of exterior-rated architectural floor mounted, IP66, round flood light complete with antiglare snoot. The power consumption should be not more than 100 watts, minimum system lumen delivered shall be 3700 lumens 45° beam angle, CCT-RGBNW LED from CREE/NICHIA/LUMILED/OSRAM.The fixture dimensions shall not be more than dia 225mm and Height 205mm. The housing material should be die-cast aluminum with Electrostatically applied polyester powder coating, The luminaire is to be installed with anti-aging and anti-UV high optical efficiency PMMA lenses and a clear tempered glass cover. Bracket shall have a locking mechanism to fix and secure the required tilting angle, ±90°. It should have CRI>80, and SDCM≤4.

Supply of exterior-rated architectural floor mounted, IP66, round flood light complete with antiglare snoot. The power consumption should be not more than 50 watts, minimum system lumen delivered shall be 1835 lumens 60° beam angle, CCT-RGBNW LED from CREE/NICHIA/LUMILED/OSRAM.The fixture dimensions shall not be more than dia 170mm and Height 164mm. The housing material should be die-cast aluminum with Electrostatically applied polyester powder coating, The luminaire is to be installed with anti-aging and anti-UV high optical efficiency PMMA lenses and a clear tempered glass cover. Bracket shall have a locking mechanism to fix and secure the required tilting angle, ±90°. It should have CRI>80, and SDCM≤4.

Supply of controller to author, configure, and control dynamic LED light shows for DMX lighting networks. The controller with two universe of DMX ports control up to 340 light addresses, Works as a stand-alone or computer-driven controller, Secure Digital (SD) card drive for flexible show storage , USB 2.0 interface for downloading shows and configuring from attached PC or Mac, Simple installation and wiring is required, Flexible, adaptable mounting options are expected, Should be provided with light show authoring software, Direct line voltage power supports 100 — 240 VAC , Six configurable effects — Using light show authoring software to select from six effects, adjust effect settings, such as color, speed, and brightness etc as reqd.

Supply and fixing of 35W LED Postop made up of aluminium pressure die-cast aluminum with polycarbonate cover in addition to a specific weathering resistance treatment, Bigger Dia of 338 mm helps for uniform light distribution & Polycarbonate cover for glare-free light distribution, PDC spigot helps in sturdiness of product, Smooth finish Top cover, Robust Mounting base & Direct the light where it is needed to avoid sky pollution. High Efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen Efficacy of LED>100Lm/W and CRI >70. Powered by Built In electronic. LED driver with THD<10%, 4kV inbuilt surge protection, high cut off at 325V, LV cut-off & HV Protection@440V for 8 hrs. System Lumen>4500 Lm, IP 65, IK 05, PF>0.95, Operating voltage range: 140 V - 270V, Average life L70B50: 50,000 hours. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval