SPECIAL REPAIR REPLACEMENT OF EXISTING SECURITY WALL AT A1 DEF LAND UNDER SVY NO 358 360 AND 360B NEAR HYDRABADI BASTI AT DEMO BN UNDER GE MAINT INF SCHOOL MHOW

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation or for shafts, wells, cespits, manholes pier hold etc not excceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails ,straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc all as specified .Note: Each line wire shall be measured and paid

Dismantling fencing wire mesh of any size and any type

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete of any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavation in post holes or similar holes, each not exceeding 0.5 cum, getting out in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified

M&L for plain cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in foundation ,post, etc complete all as specified

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified

Supply only Chain link MS galvanisd fencing, any size or type

S&F 11 to 15mm dia of neck MS Screw bolts (Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square n.exc 20 cm long etc complete all as specified

S&F mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 icomplete all as specified

S&F Mild stel joist, channel, angle, or tee sections, fixed independently, without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe - 290 (Gde E- 165). complete all as specified

S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 1.00mm thickness of mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified

M&L brick work with sub class `B ` modular bricks,straight or curved on plan exceeding 6.0 m mean radius build in cement mortar 1:6 complete all as specified

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified.

M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in sub base, levelling course etc complete all as specified

M&L for salt glazed stoneware drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified

Demolition of reinforcement cement concrete of any description and in any position in ground floor and pavings n.exc 15cm thick (below or above GL) complete all as specified

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundations, filling and mass conctrete all as specified

M&L for RCC M-25 Design mix concrete as in foundation including rafts, footings, foundation, beams, plinth beams, bases of columns etc and mass concrete

M&L for RCC M-25 Design mix concrete as in columns, pillars, piers, posts and struts

M&L for RCC M-25 Design mix concrete as in beams, cantilevers, bressummers, lintels over 1.5m span and similar work complete all a specified

M&L for use and waste formwork to sides of concrete foundation footings, bases of columns raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work : vertical or to batter ,rough finished surfaces of concrete

M&L for use and waste formwork to sides of pillars, post, struts, piers, columns and stanchions , fair finished surface of concrete

M&L for use and waste formwork to sides of soffits of floor or roof beams etc fair finished surface of concrete

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F TMT bars 5mm dia and over upto 10mm dia bar as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Returing, filling in trenches including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic smooth exterior paint of required shade @ 1.67 litre/10 sqm over a coat of primer @ 2.20 kg/10 sqm of same make base all as specified

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including a coat primer with alkali resisting priming paint complete all as specified

M&L for preparation of old surfaces of walls and applying two coats of cement base paint all as specified

M&L for preparation of new steel surface of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

yash enterprises

sunway associates