Loading…
Loading…
Updated dates
Tender Value
₹27.7 L
EMD Value
₹55,340
Closing Date
6 Jun 2026, 6:00 pmDue tomorrow
Garrison Engineer (East) JRC
Garrison Engineer (East) JRC
PRON OF ONE LPG STORE NEAR BLDG NO. P-22 AT J-1 LOCATION UNDER AND CERTAIN OTHER SANCTIONED WORKS UNDER GE (EAST) JALANDHAR CANTT
2026_MES_764292_1
GE/JULL/ET-04/2026-27
Open Tender
Civil Works
180 days
Garrison Engineer (East) JRC
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) JRC
₹55,340
Yes
9 May 2026
9 May 2026
13 Jun 2026
9 May 2026
6 Jun 2026
23 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil, complete all as specified and as directed. | 284.11 | Sqm | - | - |
| 2 | Excavating in trenches n.exc 15 m wide and n.exc 1.5 m deep for foundations, etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and getting out in ordinary soft/loose soil, complete all as specified and as directed. | 107.39 | Cum | - | - |
| 3 | M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) lean concrete as in foundation, filling and mass concrete complete all as specified | 2.6 | Cum | - | - |
| 4 | M&L for PCC 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. | 0.8 | Cum | - | - |
| 5 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified | 8 | Cum | - | - |
| 6 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed. | 2,123.46 | Kg | - | - |
| 7 | Ditto all as per Srl Item No 6 above, but 5 mm dia and over upto and including 10 mm dia inserting, spacers and binders | 608.2 | Kg | - | - |
| 8 | M&L for Mild steel 6 to 8mm dia TMT bars and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips | 200 | Kg | - | - |
| 9 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, flat surfaces of concrete , surface is required to be fair finished complete all as specified and as directed. | 36.14 | Sqm | - | - |
| 10 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete, surface is required to be fair finished complete all as specified and as directed. | 38.7 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
Tender04.pdf
Tender Documents • 1.33 MB
BOQ_856228.xls
BOQ • 2.03 MB
Download all tender documents and submit your bid