Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹25.7 L+₹1.3 L (5.43%)Rejected-Finance MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹26.5 L+₹2.1 L (8.77%)Rejected-Finance ASHAA BHAVAN RAMNAGAR NAKA FAIZABAD | AYODHYA | UTTAR PRADESH | 224001 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹26.7 L+₹2.3 L (9.53%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹28.3 L+₹3.9 L (16.1%)Rejected-Finance CHANDPURA TIKAMGARH DIST TIKAMGARH MP | TIKAMGARH | TIKAMGARH | MADHYA PRADESH | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Abohar
Garrison Engineer Abohar Pin 152116
Comprehensive B/R and E/M repairs to OTM and Married Accommodation at Central Area of Military Station Abohar
2022_MES_531447_1
GE ABH-17/22-23
Open Tender
Civil Works
Item Rate
300 days
Abohar Mil Stn
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Garrison Engineer Abohar
₹60,000
Yes
16 Sept 2022
16 Jun 2022
28 Jul 2022
16 Jun 2022
26 Jul 2022
30 Jun 2022
Amount
SCHEDULE 'A' SECTION I (B&R Portion)
Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified.
Taking down chowkats with shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm)
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site
Taking down shutters refixing in same opening but area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified.
S&F PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and designs
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC’C’ channel heaving a PVC sheet strip of 20mm width suck inside
S&F Aluminium handle cast type anodized 125 mm long
S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long
S&F 75 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm all as specified and directed by Engineer - in - Charge .
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm all as specified and directed by Engineer - in - Charge .
M&L Cement concrete 1:3:6 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge.
S&F Factory made 35mm thick 2nd class hard wood glazed Skelton shutters open rebated and prepare to receive glass gauges etc without sash bars edges of gramng plain chamfered or rounded fluted without and mixed beads for securing gases etc size of chambers as specified in SSR Part I sector 8-20 (a) fitted to chowkhat.
S & F Factory made Plain framed, panelled shutter IInd class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed
S&F Aluminium barrel tower bolt 200mm long stove enameled black
S&F Aluminium pressed handles oval type enameled black 150mm size
S&F mild steel sliding door bolt 300 mm long plate type stove enameled black with bright bolt not less than12 mm dia.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40 mm
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm
Hacking out old broken glass (any size,thickness,quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified & directed by Engineer -in-charge.
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane
S & F 3 mm thick Figured glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified .
S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete.
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer .
M & L providing two coats of synthetic enamel paint over new surface and a coat of red oxide primer on steel surfaces including preparation of surface of any description not exceeding 10 cm width or girth all as specified .
S&F Factory made box type steel window/Ventilators with hung shutter both glazed and gauged ,shutter frame 60x25mm ERW hollow 'P' section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx 70mmx1.6mm thick including fixing glazed portion,iron grills 8mm suare MS bar hunges with steel handle and fitting, lugs etc, including one coat of primer complete all as shown in drg No BTD 889 sheet 1/4 to 4/4 specified and directed.) (Note :- Wire mesh and glass shall be measured and paid separately under relevent items of sch/BoQ)
Taking down aluminium door shutter , Refixing in the same opening after tightening of members ,refixing of glass panes and rubber bids inluding adjusting of old hydraulic door closer complete.
S&F Powder coated aluminium frame for doors , window , ventilators with with one or more rebate including joiing cleat for fixing etc . complete all as specified.
S&F Powder coated aluminium door shutter , aluminium section wt 0.55 kg / mtr including necessary joining cleats ,glazing clips, rubber neoprene packing , handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc.
S&F Powder coated aluminium window / ventilator shutter , side hung type without sash bar ,aluminium section wt 0.55 kg / mtr including necessary joining cleats , glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150 mm long (1 No.) hingestype B-21 100mm long (2 Nos. )suitable handle (1 No) complete allas specified .
S & F in repair powder coated aluminium sliding window three track with frame & two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium powder coated section aluminium cleat ,PVC track ,bearing, handle lock,rubber beading etc complete fittings as approved. Note:- Size of aluminium section shall be under- (i) Three track top and vertical - Jindal main-2010 section No 20621 or equivalent as approved by GE. (ii) Three track bottom - Jindal main - 2010 section No 20620 or equivalent as approved by GE. (iii)Shutter vertical section -Jindal main -2010 section 20604 or equivalent as approved by GE . (iv)Shutter top and bottom - Jindal main -2010 Section 20604 or equivalent as approved by GE. (v)Shutter vertical middle (interlock) - Jindal Main -2010 Section 20605 or equivalent as approved by GE.
S&F Powder coated aluminium grill weight not less than 1.50 kg/sqm in windows,doors or ventilators of approved make complete all as specified as directed by Engr-in-Charge.
S&F sheet glass 5.5mm thick ordinary quality and fixed in alum section including solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturers in squares not exceeding 0.50 sqm in each pane
S & F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified .
S&F in repairs aluminium (die cast) body, door closer hydraulically regulated designation No. 3 , universal type , suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
M&L in repairs Aluminium Motrice lock 4 levers and 75mm size for aluminium doors
S&F for 150mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring,fixed in floor.
Dismantaling boarding, any discription fixed in any position with Screws.
M & L for 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M & L for Solid PVC Wall lining consisting of 5 mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing.
Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.
M & L for rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement.
M & L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement.
M&L rendering 10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement.
M & L 15mm thick rendering in Cement Mortar 1:3 on roof surfaces finished even and smooth without using extra cement complete all as specified .
Providing and applying microfiber reinforced UV resistant Acrylic polymer coating three coats having solid contents 69% polymer content 35% & Tensile strength 2.6N/mm2 of Dr. fixit Newcoat/stat/parex or equivalent with a paint brush over existing roof surface after removal of all loose material, lime dust etc. with wire brushes, coir brushes from roof surface to get absolutely cleaned surface free of foreign contaimnant filling of cracks wherever found with polymer based mortar, and after repairing the surface apply primer coat with Dr. fixit Primeseal. polyester reinforced fiber net laid on the surface after the first coat and all the joints of brick is repaired by polymer based mortar. Undulation on the surface repair before executing the water proofing treatment complete all as specified & directed by Engineer-in-charge. Note : The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer instructions & as directed by Engineer-in-Charge.
M&L for two coat of cement base paint over a coat of alkali resistant cement primer on newly plastered surface including preparation of undecorated surface complete all as specified and as directed
M& L for two coat of Acrylic distemper on new plasterd wall surfaces of walls paint over 3mm thick wall care putty including necessary preparation of surfaces all as specified.
M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling.
M&L for preparation of old decorated surface of ceiling and applying one coat of Acrylic distemper on ceiling.
M & L one coat of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M&L for preparation of old distempered surfaces of walls by washing, rubbing down, stopping nail holes, fillings cracks with putty etc and applying one coat of Acrylic distemper on walls.
M&L for preparation of old plastered surfaces of wall by complete removing old treatment and applying two coats of interior grade wall putty( 1mm thick of each coat) and making it smooth with sand paper by mechanical method i.e. with hand electric grinder and then applying two coat of Acrylic distemper including all as specified and directed by Engr-in-charge.
M & L applying one coat of cement base paint on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of painted surfaces complete all as specified and directed by Engineer - in – Charge
M&L for preparation of old distempered surfaces of walls by washing, rubbing down, stopping nail holes, fillings cracks with putty etc and applying one coats of weather proof exterior emulsion complete all as specified and as directed by Engineer-in-Charge.
M & L one coat of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
Dismantling structural steel work including doors,gates but excluding framed truss etc.
S & F framed work such as grills, cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified .
S&F in Repair 25 mm dia drapery curtain rod with decorative end knobs complete with brackets and fixed to walls complete all as sp & dir .
S & F Stainless steel (SS) Curtain rod 25mm dia, wall thickness of pipe not less than 18 gauge and grade SS 304,including brackets and pair of decorated end knobs (finials),stop roller etc as per site requirement,fixed to wall with fixing accessories,including taking down old existing curtain rods if any complete all as specified and as directed by Eng-In-Charge.
Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices.
S&F glazed ceramic coloured tiles joint free 300x450x7mm square or rectanguler as on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4
M&L Non skid ceramic Light shade coloured 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
Ditto all as above but as in skirting over 10 mm cement mortar backing coat ( 1:3) complete all as specifed and directed.
M&L Non skid ceramic Light shade coloured 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.18 sqm but n. exc, 0.38 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
Ditto all as above but as in skirting over 10 mm cement mortar backing coat ( 1:3) complete all as specifed and directed.
M & L for Light shade vitrified ceramic tiles 10mm thick( Square/rectangular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:6) complete all as specified and directed by Engineer - in - Charge.
Ditto all as above but as in skirting over 10 mm cement mortar backing ( 1:3).
M&L cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate as in floors 25 mm thick for tiles all as specified.& directed by Engineer -in-charge..
M&L 18-20mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Demolition of cement concrete ( un re-inforced) of any description in ground floor and pavings Nexc15 cm thickness (below or above GL)
M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below and as directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:5:10 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified Manufacturer. Make:- Dr. Fixit/Fosroc/STP Note: (i) The treatment shall be carried out as per the manufacturers instructions and as directed by the Engineer in charge.The name of firm shall be got approved from GE before carrying out the work. (ii) The Plan area of floor shall be considered for payment and provn of cement work is excluded from quoted rate for this item. (iii) Plaster shall be measured and paid separately. (iv) PCC filling under sunken area will be measured & paid separately
M & L PCC (1:5:10) using 40mm graded burnt bricks aggregate as in foundation filling & mass concrete or as in sunken floor complete all as specified & directed by Engineer-in-charge
Rendering to sunken slab floor and vertical sides 15mm thick in CM 1:3 using WP compound
Dismantling water tanks and removing to store of exc 250 nexc 500 ltr capacity
Dismantling water tanks and removing to store of exc 500 nexc 1000 ltr capacity
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge .
S&F in repair 20mm Gate valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge..
S&F in repair 20mm Ball brass valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge..
S&F in repair PVC low level flushing system 10 Ltr capacity with flush pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair Viterous China squating pan Orrisa pattern size 580X440mm wash down water closet pan , white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge..
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete.
S&F in repair Vitreous china wash basin white flat back size 550x400 mm including brackets exceeding taps waste chain and plug and porcelain stopper fixed complete all as specified and directed by Engineer-in-Charge..
S&F in repair plastic water closet seat cover, white closed patern with flat bottom and cover and mild steel cromium plated or aluminium hinging device complete all as specified and directed by Engineer-in-Charge.
S&F repairs vitreous china Half stall urinals flat back white minimum with grating and union for discharge pipe , providing & fixing plugs, bedding urinal against wall in CM 1:2 , securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with nbrackets, flush pipe, grating and union for discharge pipe complete all as specified and directed by Eng-in-charge.
S & F repairs 15 mm bore concealed stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup (Concealled type) complete all as specified and directed by Eng-in-charge.
S&F in repairs 15mm bore angle valve fancy type chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed by Eng-in-charge.
S & F in repairs 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe complete all as specified and directed by Eng-in-charge.
S/F in repairs pillar taps 15mm bore fancy type chromium plated cast copper alloy with capstan heads scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Eng-in-charge.
S&F in repair brass chromium plated shower Rose 125mm size with swivel joints,any size, incl shower arm fixing to pipe or union complete all as specified and directed by Engr-in-charge.
S&F in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.
S&Fin repairs Sink mixer with swinging spout(wall mounted model)Chromium plated brass with connection and nut complete all as specified and directed by Engr-in-charge.
S&F in repairs brass chromium plated wall mixer for mixing hot & cold water with screwed down for iron pipe and fixed complete all as specified and directed by Eng-in-charge.
S & F in repairs stainless steel Grating doom 125 mm dia all as specified and directed by Eng-in Charge.
S&F in repair PVC connection both side brass unions internal for size 15mm dia and 450mm long complete all as specified and directed by Engineer-in-Charge.
S&F PVC waste pipe 32mm dia & 90 cm long complete all as specified and directed by Engineer-in-Charge.
S & F in repairs PVC corner shelf complete all as specified and directed by Eng-in-Charge.
Supply and fixing chromium plated Towel Rail (Single) 600/610mm long between flanges including bracket, fixed on wall with chromium plated brass screws and PCV plug complete all as specified and as directed by Engineer-in-Charge. Make- Jaquar ACN-CHR-1111SM/ Techno commercial equivalent in Kohler/Grohe
Supply and fixing hand shower (health faucet) ABS body including 1.0 meter long 8mm dia flexible tube and including wall hook complete all as specified and as directed by Engineer-in-Charge. Make – CERA F8030103 / Techno commercial equivalent in Kohler/Grohe
Supply and fixing chromium plated soap dish holder, fixed on wall with chromium plated brass screws and PVC plug complete all as specified and as directed by Engineer-in-Charge.Make- CERA F5007106/ Techno commercial equivalent in Kohler/Grohe.
S&F EWC Jet spray complete all as specified and directed by Engineer-in-Charge.
S&F in repairs kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and onnecting union to pipe overall size 915mm x 460mm bowl size 410mm x 30mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Stainless steel utensil rack of size 750mm x 600mm, made out of 1mm thick stainless steel sheet of 1st quality as per sample kept in GE’s office (weight Appx 10Kg) supplied and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC bathroom cabinet mirror 450 x 350 mm complete all as specified and directed by Engr-in-charge.Make:-Prayag cat part no551/polytuf/shakti/pearl as approved by GE.
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store
Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store
Supply & fixing mild steel tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to wall all as specified & directed by Engineer-in-charge.
Fixing only mild steel tubes of size 15mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified & directed by Engineer-in-charge.
Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified & directed by Engineer-in-charge.
Fixing only mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified & directed by Engineer-in-charge.
Dismantling of cast iron pipes jointed in cement mortar and taking out from trenches walls etc upto 100 mm bore all as specified and directed by Engineer - in - Charge .
S & F PVC(SWR) 110 mm bore Pipes single socketed in any length with rubber ring joints,laid in trenches or in floors all as specified and directed by Engineer - in - Charge.
S & F PVC(SWR) 75 mm bore Pipes single socketed in any length with rubber ring joints,laid in trenches or in floors all as specified and directed by Engineer - in - Charge.
S&F PVC ( SWR) pipes bore of 110 mm single socketed in any length with rubber ring joints fixed to wall all as specified
S&F PVC ( SWR) pipes bore of 75 mm single socketed in any length with rubber ring joints fixed to wall all as specified
S&F PVC(SWR) bend ( any radius) dimenshing pieces or tappers ( large bore measured) 110mm bore
-ditto- all as above but 75 mm bore
S & F PVC(SWR) Vent cowls 110mm bore all as specified and directed by Engineer - in - Charge.
M & L in repair providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick one decorative lamination sheet consisting of carcass 18mm thick PVC Sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets SS screws etc.The panels shall be fabricated using adhesive and screws where ever required. all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as drawing and specification approved by Eng-in-Charge.
M & L in repair cubboard with prelaminated Block board one side with decorative choice laminations exterior grade 18-19 mm all as specified by Engr-in-charge
S&F Magnetic catcher fixed in with nut,screw washer complete all as specified and directed by Eng-in Charge.
S & F 100mm extuded,brass handles,fabricated type polished for cabinet shutters complete all as specified and directed.
S & F for solid PVC frame (single revated) of size 60mm x 30mm made out of solid pvc foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK Screws complete all as specified and directed by Eng-in -charge.
S & F Continuous (piano) hinges, brass, bright finish or electro galvanised all as specified.
M & L for welding in repairs ex 2.5 cm but not exc 5cm complete all as specified and directed by Eng-in-charge.
M&L for providing precast cement concrete louvers and jallies 40mm thick type B0 1:2:4(12.5 mm graded aggregate) as in Jafri wall set in cement mortar 1:4 including all mouldings but excluding frame complete all as specified and directed by Engr-in-Charge.
M & L for Shotcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characteristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 25 mm average thickness from slabs,beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge.
S&F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt all as specified & directed by Engineer-in-Charge.
M& L in repair of Pre painted gavalume zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified.
Dismantling of brick work built in cement mortar all as specified .
M&L for Brick work using fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
All as above but except bricks all as specified .
M & L for writing letters or figures for marking building no (block ,roman,italic or indian) n exc 30 cm high complete all as specified and directed by Engineer-in-Charge.
S&F in repair powder coated GI, E-grid suspended false ceiling grid system 600mmx600mm with main runner 39x29.7x0.8mm, cross tee 39x27.7x0.80mm, and wall angle 22.20x22.20x0.65mm to make grid of size 600 mm x 600 mm to receive false ceiling of size 595 x 595 mm suspended with Not less than 2 mm dia GI wire hanger fixed with steel dash fastener or frame purlin of the roof with butterfly clips, hold down clips etc. main runner, cross tee, wall angle, of MS galvanised (PPP COS) complete all as specified.
S&F in repair 7mm - 8 mm thick exposed metal frame celing with Zypsum board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid all as per manufacturer's instructions.finish, fixed to aluminium/ CGI frame work with hold down clips in false ceiling complete all as specified.
SCHEDULE 'A' SECTION-II (E&M PORTION)
Taking down carefully any type point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing ( Except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing.
Taking down MCB with sheet metal enclosure, main switch DB etc., and making good disturbed surfaces to match with the existing surfaces
M&L point wiring (CONCEALED) for using 1.5 sqmm nominal cross sectional area copper conductor multistranded ,PVC insulated unsheathed , FRLS cables in and including using PVC conduits not les than 20 mm dia and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS and making good all disturbed work to match the existing for One light/fan/bell point controlled by one 5 Amps one way switch and all as specified and brass screws, washers etc. complete all as specified.
All as per Item No. here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No. here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No. here in before but for One light point controlled by two 2-way switches of 5 amps
Description all as per item No here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
Description all as per item No here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 1.5 Sqmm, 1100V grade in Existing concealed conduit, surface conduit/casing capping and one run PVC FRLS insulated unsheathed copper conductor of size 1.5 Sqmm as earth continuity wire and connected to common earth dolly using color code as per IS and all as specified with copper lugs/timbles inserted in existing MS boards/boxes complete heavy duty for housing switches, , regulators, bell push etc, and making good all disturbed work to match the existing for One light / fan/bell point controlled by one way piano switch 5 Amp. and complete all as specified and directed.
All as per Item No. here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No. here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No. here in before but for One light point controlled by two 2-way switches of 5 amps
Description all as per item No here in before but in existing conceales for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
Description all as per item No 15 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and all as specified complete all as specified and directed.
S & F in repairs switch piano one way 5/6 amps 240 volts complete all as specified and directed.
S & F switch piano one way 15 amps 240 volts complete all as specified and directed.
S & F Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified.
S & F Bell ding dong AC, 230 Volts, Single pole complete all as specified.
S & F socket 5 in 1, 5 amps flush type complete all as specifeid.
S & F socket 5 in 1, 5/16 amps flush type complete all as specifeid.
S & F switch piano flush type 5 amps but 2 way type complete all as specified.
M & L lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings incl LED bulb 12W complete, Make- Anchor/SSK/CONA
M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, iwsolated body complete, Make-Anchor/SSK/CONA
Supply only fan regulator electronic (socket) type, single phase, 230Volt complete all as specified and directed Make: Anchor/Cona and equivalent make
M&L for submain wiring comprising single core ,2 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings/existing concealed conduit complete, including provision of 1 x 6 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)
Description all as per item No here in before but 2 Runs of 6 sqmm complete in PVC conduits/ complete all as specified.
Description all as per item No here in before but 2 Runs of 4 sqmm in PVC conduit and its fittings complete all as specified and directed by Engr-In-charge.
M & L cutting chases, pinning in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge .
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable of size 2 core 10 sqmm nominal cross section in service connections of PVC insulated aluminium multi standard conductor served with an inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed by Engr-In-charge.make- Havells/Plaza/Finolex/Kalinga/Kei/Anchor.
All as per Item No above here-in-before but 2 core 6 sqmm complete all as specified and directed.
Taking down existing control board and supplying and fixing CRCA sheet metal board made of 2.0 mm thick metal sheet and painting 2 coats of synthatic enamel paint over a coat of primer inluding copper bus bar and fixed with wall for fixing 04 Nos of meters complete with wiring,fitting and accessories, locking arrangement with handle (not less than size of box 100cmx80cmx25cm and adequate depth for the following equipments,internal wiring and termination of external cables,lugs,glands,wire thimbles and conduit/flexible pipe for finishing as required) comprise of following:- (a) Incoming 63 Amps 4 pole MCCB 25 KA -01 Nos (b) Bus bar of 200 Amps TPN & Earth (c) 40 Amps DP MCB -04 Nos ( for Electric DU Meter) (d) 10 Amps DP MCB - 01 Nos ( out going for Stair case/garage light circuit) (e) Fixing only existing single phase KWH meter after taking out carefully for refixing in panel.
Supply and fixing MCCB TPN ( 4 pole) 63 Amps 415 Volts of braking capacity 16 KA complete taking down old unserviceable one and making necessary connections as existing ls with CTC solutions complete all as specified and directed. Make :IndoAsian or equvalent of Havells/LegrandSchneider/HPL/Standard
All as per Ser Item No but 100 Amps with braking capacity 16 KA.
All as per Ser Item No but 125 Amps with braking capacity 16 KA.
S&F sheet metal enclouser VTPN/HTPN DB having facility to fix MCCB incomer upto 125 Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates including making good disturbed surfaces after taking out old unserviceable DB complete all as specified and directed.
All as per Item No above here-in-before but TPN DB 8 Way double door type complete all as specified and directed.
Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 8 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed.
All as per Item No above here-in-before but SPN 4 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed.
S&F PVC enclouser SPN DB 2 way having facility to fix MCB DP/SPN 2 ways complete fitted with bus bars, neutral links including provision of MCB DP 6-16A and making good disturbed surface area complete all as specified and directed.
Supplied and fixed Miniature circuit breaker (MCB), single pole, 240 Volts, of 6-32 amps current rating and 10 KA breaking capacity, B' series type complete all as directed by Engr-in-charge.
Supplied and fixed Isolator, Double pole, 240 Volts, of 32-63 amps current rating of 10 KA complete all as directed by Engr-in-charge.
M&L LED tube light fixture (tube rod) with batten fitting, environmental friendly energy efficient ready to use 18/20W LED 6500K and above (4') complete all as specified and directed by Engr-In-charge.
M&L LED tube light fixture environmental friendly energy efficient of 18/20W LED 6500K and above (4') including electric connection with PVC copper flexible twin core cable, 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge.
S & F LED street light luminaitres 20/25 watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25 mm dia medium grade pipe (45 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm-2 Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge
M&L for ceiling light fitting of Skylux LED efficient LED surface 2'x2' luminaire & glare free soft illumination of capacity 36Watt LED white colour complete all as specified and directed by Engr-In-charge.
M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item).
Supply and fixing LED Post top lantern fittings LED type 20 Watt decorative ideal to lit up parks, garden ways and heritage sites & landscape lighting with IP-65 resistant to impact and corrosion anti glare and uniform distibution complete with driver and lamp complete Make; Crompton CAT No: LPTH-20W-CDL or equavalent in Bajaj/Philips/Syska/Havells/Halonix
Supply and fixing LED post top lantern fitting cast aluminium witth decorative opal polycarbonate diffuser of capacity 40 Watt with IP-65 protection Bajaj : BGCL 40 W LED WH
Supply and fixing LED Post top lantern fittings 60 Watt decorative indirect post top for 360 degree garden & landscape lighting with IP-65 resistant to impact and corrosion anti glare and uniform distibution Make; Crompton CAT No: LPTO-60W-CDL or equavalent in Bajaj/Philips/Syska/Havells/Halonix
M/s GURFATEH BUILDERS
A R CONSTRUCTION COMPANY
G S CONSTRUCTIONS
POOJA CONSTRUCTION COMPANY
Bidder Name
G S CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .