SMERT PERODICAL SERVICES TO THE VARIOUS BLDGS AT BASISTHA UNDER GE GUWHATI

Amount

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down, srapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall surfaces complete all as specified and directed.

Material and labour for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old surfaces and applying one coat of acrylic distemper on wall using auto roller for making rhe surface uniform complete all as specified and directed.

Material and labour for preparation of old surfaces and applying one coat of acrylic distemper on ceiling using auto roller for making rhe surface uniform complete all as specified and directed.

Material and labour for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer's instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat of the prepared mix with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material and labour for one coat of acrylic water based exterior grade primer @0.8 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algae properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.

Material and labour for preparation of old surfaces and applying one coat of cement base paint on wall using auto roller for making rhe surface uniform complete all as specified and directed.

Material and labour for preparation of old treated wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surfaes of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

NOTES FOR ITEM NOS. 6.00 TO 9.00 & 13.00 :- (a)The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Taking down cement plaster or cement lime plaster of any description on brick work, conrete work or stone walls including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:6 on brick or concrete surface, finished even and fair without using extra cement, complete all as specified and directed.

Material and labour for rendering 15mm thick in two layers (10mm thick backing layer + 5mm thick top layer) in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins, facia etc upto 3 stories height, mixed with water proofing compound (ISI marked) @ 3% by weight of cement mixed in 5mm thick top layer or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and as direted. NOTE:- (i) Supply only water proofing compound shall be measured and paid separately under relevant items. (ii) Cost of scaffolding upto 3 stories height of building is included in quoted rate.

Material and labour for preparation of old surfaces and applying two coats of cement base paint on wall using auto roller for making the surface uniform complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of acrylic distemper on wall over a coat of chalk whitening primer using auto roller for making the surface uniform complete all as specified and directed.

Material and labour for preparation of old surfaces and applying one coat of exterior emulsion paint on wall using auto roller for making rhe surface uniform complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed

Material and labour for preparation of old painted steel surfaes of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for writing letters or figures (block Roman, Italian or Indian) not exceeding 30 cm height on existing sign board (Black or yellow base) including two coats of synthetic enamel paint over a coat white base synthetic enamel paint complete all as specified and directed.

M&L for Stops, commas, short lines, dashes, hyphens, brackets, etc including two coats of synthetic enamel paint over a coat white base synthetic enamel paint complete all as specified and directed.

Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltr (unndiluted) /10 sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed.

Material and labour for preparation of old painted wooded surfaes of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint on wall over a coat of suitable primer using auto roller for making the surface uniform complete all as specified and directed.

M&L for Index hands (natural size) or arrows (upto 40cm long) including two coats of synthetic enamel paint over a coat white base synthetic enamel paint complete all as specified and directed.

M/S SUNRISE ENTERPRISE (BID ID -3128136)

M/s Dhani Enterprise (BID ID -3127782)

M/s JK Jangid and Company (BID ID -3129252)