CERTAIN REPAIR AND REPLACEMENT TO INTERNAL ELECTRIFICATION, SANITARY FITTINGS, KITCHEN CABINETS, WIRINGS ETC TO TEMPORARY BUILDINGS

Amount

Removal of Plants/ Shrubs grown on walls/ slabs/beams by making holes or demolition of concrete etc and including applying suitable chemical for killing the roots of Plants, filling of holes with concrete and making good complete all as specified and directed.

Taking down chowkhats or frames with out taking off the shutters from the frames not exc 1.50 sqm each and stacking for issuing under credit all as specified and directed

Supply and fix Solid PVC door frames size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS squre tube, fixed to openings all as specified and directed

M&L for Factory made solid panel PVC door shutter 30mm thick (styles) consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain color PVC 'C' channel having aPVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side& as gap insert for top rail and bottom rail; Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specfication & drawing all as specified and directed

S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Make : Indal co / Hindal Co / Jindal

S & F Anodised aluminium door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, ruber neoprene packing including mortice lock (01) handles (2 Per leaf) ,tower bolt (2 per leaf) , hinges (3 per leaf), door stoppers(1 per leaf), anodised aluminum snap beading screws etc. complete all as specified.

M & L for 18/19mm thick Prelaminated particle board, interior grade, both sides with decorative choice laminations,fixed with screws to timber frame work fixed aluminium beading with screw etc all as specified and as directed.

S & F SS Butt hinges medium weight cold rolled, and fixed 75 mm size all as specified and directed

S & F Aluminium anodised barrel tower bolts extruded section 100 mm size all as specified and directed

S & F Powder coated Extruded aluminium alloy handles fabricated type size 125 mm all as specified and directed

S & F Factory made single extruded WPC (Wood S&F Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 25mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type panel of size 18mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F soft close telescopic drawer channel, n exc 550mm length, sidemount type, suitablle for weight upto 35 kg all as directed by Engr-in-Charge. Make : Godrej Model No 8179 or equivalent in other approved manucturer.

S&F 50mm dia, polished, hard wood knobs fixed with screws

S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S & F 30mm flap width Brass Continuous (piano) hinges with necessary fittings and screws etc complete all as specified

M&L in repairs for 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

S&F 75 mm size extruded aluminium alloy handles fabricated type anodised all as specified and directed

S & F in repairs 30mm flap width Brass Continuous (piano) hinges with necessary fittings and screws etc complete all as specified

S&F Floor Door Stopper of Aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors 140 mm complete all as specified.

S & F Butt hinges medium weight cold rolled mild steel, and fixed 100 mm size all as specified and directed

S & F Aluminium anodised barrel tower bolts extruded section 200 mm size all as specified and directed

S & F Extruded aluminium alloy handles fabricated type anodised size 150 mm all as specified and directed

S & F in repairs Aluminium extruded sction body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified.

S&F in repairs 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.

Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore

Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 20 mm bore

Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 25/32 mm bore

Supplying and laying 16mm OD of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying 20mm OD of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying 25mm OD of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying 32mm OD of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S & F 20mm Male Brass Threaded Adaptor (MTA/ MBTA)

S & F 20mm Female Brass Threaded Adaptor (FTA/ FBTA

Disconnecting existing tanks, setting aside (or lowering if required) in repairs and Supply, Hoisting and fixing 1000 Litre Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I .

Disconnecting existing tanks, setting aside (or lowering if required) in repairs and Supply, Hoisting and fixing 500 Litre Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I .

S &F 25mm Tank Adaptor

S &F 32mm Tank Adaptor

S &F 25mm UNION

S &F 32mm UNION

S &F 20mm Gate VALVE

S &F 25mm Gate VALVE

S &F 32mm Gate VALVE

S & F in repairs 40/50mm Float valve high pressure, with self closing type with ball polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to tank

Taking down old PVC (SWR) pipes fixed on walls and removing to store for taking in account of credit for 75 /110 mm dia complete.

Taking down old CI floor traps with waste pipes of length approximately 3.20 meter embedded in concrete and making good the disturbed portion with PCC 1:2:4 and S&F PVC floor trap only of size 75 mm.

S&F PVC (SWR)110mm bore pipes single sockted in any length with rubber ring joints laid fixed to walls/floors

S&F PVC (SWR) 75 mm bore pipes single sockted in any length with rubber ring joints laid fixed to walls /floors

S&F PVC (SWR) bends any radius 110 mm bore

S&F PVC (SWR) bends any radius 75 mm bore

S&F PVC (SWR) ,double access door (Double Y) equal or unequal 110 mm bore including neessary fittings, clamps etc.

S&F PVC (SWR) ,single access door (single Y) equal or unequal 110 mm bore including neessary fittings, clamps etc.

S&F PVC (SWR) ,double access door (Double Y) equal or unequal 75 mm bore including neessary fittings, clamps etc.

S&F PVC (SWR) ,single access door (single Y) equal or unequal 75 mm bore including neessary fittings, clamps etc.

S&F PVC (SWR) 75 mm bore vent cowl

S&F PVC (SWR) 110 mm bore vent cowl

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), excluding flushing cistern and flush pipe), including fixing to existing 125/110mm size PVC (SWR) P trap /S trap etc complete all as specified and as directed.

Supply and fix in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover all as specified and as directed.

S&F in repairs fancy type Bib taps, chromium plated with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore.

Supply and fix in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed.

S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size.

Supply and fix in repairs low level PVC flushing cistern white complete with syphonic action type 10 litre capacity including float valve handle, bracket, PVC flush down pipe 32mm dia as required with bend, PVC connection 450mm long with PTMT nut and washers etc complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white of specified size (including flush pipe and waste pipe)

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm

S & F in repairs fancy type Towel Rail 600mm long of SS fixed with and including necessary screws and wooden/plastic cleats.

S & F in repairs fancy type Towel Ring of SS fixed with and including necessary screws and wooden/plastic cleats

S & F in repairs fancy type glass Shelf with bracket fixed with and including Chromium plated brass screws and wooden/plastic cleats

S & F in repairs Fancy type Shower arm 15 mm size, 195mm long with bend of 45degree with flange made up of SS all as specified and directed.

S & F in repairs 125mm Grating round/ square of any shape of PTMT.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs Vitreous China wash basin, wliile, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets Wash basins, any size, including cutting for and pinning in ends of brackets or erecting stand of including fixing of supply and waste pipe

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S& F in repairs PVC waste pipe 32mm bore for ,WHB,and Sink

Taking down cement plaster on brick or stone walls, ceilings, roof slab etc including racking out Joints, hacking for key, scrubbing down with water, etc

M&L for Rendering 20mm thick in two layer of 10mm each on fair faces of concrete surfaces in CM 1:4 mixing with integral water proofing compound (WPC) @ of 3% of cement and finished even and smooth (without using extra cement) over cleaned, brushed by wire brush and washed by water etc complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

Supply only water proofing compound

M & L for 10mm thick cement plastering with cement mortar 1:4 brick or concrete surfaces of ceiling finished fair and even complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of walls and applying two coat of white wash on wall all as specified.

Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but n exc 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement.

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets, frame work all as directed.

Material and labour for providing aluminium snap grid frame work supported by hanger 6mm dia GI (up to length as per site requirement) for false ceiling, adjusting level fixed to roof slabs/ walls/wooden members by means of ceiling cleats made out of GI flat 40x3 mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified for false ceiling fixed with screws as per manufactures instructions

Disconnecting 500 lit existing tanks, setting aside (or lowering if required) for repairs / Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position. .

Disconnecting 1000 lit existing tanks, setting aside (or lowering if required) for repairs/ Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. and hoisting if required reconnecting and re-fixing in position.

S&F in repairs stainless steel wall mounted plate rack of size 900x600x260mm of approved make including taking down old wooden plate rack complete all as specified and directed. Make : Blue star Model No BSKPR-311 or equivalent in approved Manufacturers.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings (Corrugated, semi corrugated, etc) sheets in roof coverings incl ridges

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in- Charge.

M&L for glazed ceramic coloured tiles 7 to 8 mm thick on vertical surfaces 350 x 250mm / 450 x 350mm, etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and as directed by Engineer In-Charge.

Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.

Disconnecting electric connection and taking down main switch/SPN DB/TPN DB of any size and keep in safe custody for taking credit complete and good/levelling the disturbed surfaces of wall to match with existing surface.

M&L for Point wiring one light/bell point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases and making good in wall / floor will be Measured and paid seperately.

All as per item No 96 herein before but one ceiling/exhaust fan point controlled by one, one way switch.

All as per item No 96 herein before but one light point controlled by two 2 way swithch.

All as per item No 96 herein before but one 05 Amps socket outlet point on same board.

All as per item No 96 herein before but one switch socket outlet point 5 Amps on independent board.

All as per item No. 96 here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

All as per item no 96 above but copper conductor FRLS 4 Sq mm

All as per item No 4 above one light/fan/bell point in PVC casing caping suitable size including terminal box for housing switches sockets regulaters with hylum sheet top cover all as directed (minimum 20 MM)

All as per item No 4 above one 5 amps socket point on same board in PVC casing caping suitable size including terminal box for housing switches sockets regulaters with hylum sheet top cover all as directed (minimum 20 MM)

All as per item No 4 above one 5 amps socket point on independent board in PVC casing caping suitable size including terminal box for housing switches sockets regulaters with hylum sheet top cover all as directed (minimum 20 MM)

All as per item No 4 above one 15 amps socket point on independent board with 2.5 sq mm FRLS copper conductor in PVC conduit suitable dia including terminal box for housing switches sockets regulaters with hylum sheet top cover all as directed (minimum 20 MM)

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

S&F Switch Modular 6A single pole, two way, 1 module complete all as specified and as directed.

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

S&F Modular Modular Bell Push 6A 1 Module complete all as specified and as directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular fan regulator step type 120 W, 2 module complete all as specified and as directed.

S&F Switch piano flush type 6A single pole, one way all as specified and as directed.

S&F switch socket combination 2 in 1 6 amps flush type complete all as specified and as directed.

S&F switch socket combination 2 in 1 6/16 amps flush type complete all as specified and as directed.

Supply and fix B2B T8 20 watts LED tube light cool day light 240 volts high efficiency approx 110 luman per watt, power supply in single side 2 pin terminals including taking down unserviceable lights all as directerd. Make - Bajaj, Philips, Wipro, Crompton, Halonix, Luker

Supply and fixing LED retrofit tube battern fitting 1 x 18/ 20W, powder coated white finish 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make - Bajaj, Philips, Wipro, Crompton, Halonix, Luker

Supply and fixing round / squre shape 12 watt 220 Volt AC recessed type with hight efficiency PMMA diffuser soft glare free light complete with driver, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing round / squre shape 15/20 watt 220 Volt AC recessed type with hight efficiency PMMA diffuser soft glare free light complete with driver, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 Watt, 220 V AC recessed type with hight efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for foof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete model LTP 510 P . Make - Bajaj, Philips, Wipro, Crompton, Halonix, Luker

S & F Call Bell Ding Dong AC 230 V single pole complete connecting up with flexible copperconductor cable of suitable size.

Supply and fix MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: L&T/Legrand/ Havells

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.

M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

All as per Item No 128 above but 4.0 sq mm.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth

M&L for dewatering, cleaning of service tanks / PVC water tank 1000 Ltrs capacity to remove all small masses (settled particles), algae and dirt and removal of dirty water alongwith sludge scrubbing the dirts from tank with disposal of the same to a safe distance and finally washing with bleaching powder solution, water,etc and writing the date of cleaning in white letters in black background of lettrs height two inch with stickers complete all as specified.

All as per item No 131 above here-in-before but for PVC water tank 750 Ltrs capacity

All as per item No131 above here-in-before but for PVC water tank 500 Ltrs capacity

Supply in repair/replacement rotational moulded polythylene water storage tank three layer cylindrical (vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs including connecting up with the existing water lines and dismantling and removing the old one including necerssary fittings and fixtures all as specified and directed.

All as per item No. 134 here-in-before but 1000 Ltrs capacity

TECKXPERT ENTERPRISES (BID ID -3330016)

RISHAN INFRA ENTERPRISES (BID ID -3330037)