REPAIRS/ REPLACEMENT OF FLOORING, JOINERY, PLUMBING, SANITARY AND FALSE CEILING IN HQ DB AREA, HQ CE CZ, CWE CHENNAI, AREA OFFRS MESS OLD AND NEW MES IB, FSH AND OFFRS MD ACCN AT IGOE UNDER GE CHENNAI

Amount

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks (old size) straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc with new iron mongry complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc., complete all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4sqm each along with fittings including separating guard bars/ grills/ wire mesh etc., complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, supplying and fixing in frame at site complete all as specified, directed and shown in sketch for item No. 8103 in SSR Part-II. Note: The quoted rates deemed to include 02 Nos of 125mm size aluminium anodised handle, 03 Nos of 100mm stainless steel hinges and 02 Nos. of 150mm size aluminium anodised tower bolt of extruded section per shutter.

S&F hasp and staple 100mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F aluminium powder coated designer curtain rods (draw berm rod) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws complete all as specified and directed.

S&F aluminium powder coated designer end brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wooden frames aluminium shutters complete all as specified.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wooden/ steel frames fixed in repairs complete all as specified.

S&F floor mounted door closer, heavy duty with pivot and connected accessories, satin stainless steel finish, sustainable for long duration and suitable for 12mm thick toughened glass shutters all as per BTS 80 series of Dorma or equivalent of PAG or any other reputed make as approved by GE fixed in repairs complete all as specified and directed.

S&F fully glazed door shutter made out of 12mm thick toughened glass suitable for opening n. exc. 1.20m wide, drilling holes for fixing handles including provision of 02 No. 400mm long stainless steel matt finished handles, suitable locking arrangement, centre lock, stainless steel floor spring, patch fitting consisting of bottom patch and top pivot with stainless steel fixing plate etc. including taking down existing shutter complete all as specified and directed. Note: The unit rate shall be deemed to include all necessary builder's hardware complete.

S&F in repair floor locking arrangement with brass lock and complete accessories suitable for 12mm thick toughened glass door with complete accessories of make Dorma/ PAG or other reputed make as approved by GE complete all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, posts, rafters, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 304 grade stainless steel railing comprising 80mm dia balusters at 75 to 90cm c/c and 3 No. 50mm dia SS runners duly fitted with suitable brackets/ cleats duly embedded in floor/ wall including dismantling existing wooden/ RCC railing complete all as specified and directed.

M&L for galvanised powder coated snap grid framework for false ceiling all as specified including Vinyl laminated MPL gypsum panels (GYPTECH) 9mm thick of size of 60cm x 60cm fixing with staples on snap grid on RCC slabs by means of GI wire not less than 4mm dia, hooks and rawl plugs etc at 1200mm c/c of make GYPTECH/ ARMSTRONG OR equivalent complete all as specified and directed.

S&F anodized powder coated aluminium (minimum thickness of powder coating 50 micron) frames for doors, windows, ventilators, partitions with one or more rebates including joining cleats for fixing complete all as specified and directed.

S&F aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window security grills with frame 6mm thick 75mm aperture fixed with joining cleats etc. complete all as specified and as directed.

S&F anodized powder coated aluminium ventilator having thickness of powder coating not less than 50 micron and colour as approved by GE using aluminium sections weighing not less than 0.62 Kg/ RM for frame of door shutter including powder coated aluminium snap beads, screws fixed with and including 4.00mm thick froasted/ pin head glass, necessary jointing cleats, glazing clips and one wire mesh shutter fixed on frame including stainless steel wire mesh, builder's hardware such as 75mm SS hinges-02 No, 125mm handle-01 No., 125mm long tower bolts-02 No. etc. to each shutter complete all as specified and directed. Note: Wire mesh and glass panes shall be measured and paid for separately.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) panelled door shutter of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, 2 No. 150mm long handles, 02 No. 200mm long tower bolts, 03 No. aluminium B21 hinges and 01 No. aluminium mortice lock in each door, fully glazed for providing glass panes, pre-laminated particle boards etc. including anodised aluminium snap beads, screws etc. complete all as specified and directed. Note: Glass panes and pre-laminated particle board shall be measured and paid for separately.

S&F anodized powder coated aluminium (minimum thickness of powder coating not less than 50 micron) window with side hung/ sliding shutter of aluminium section for frame work of shutter weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beads, roller, interlocking handle including 75mm SS hinges-02 No., 125mm handle-01 No., 125mm long tower bolts-02 No. to each shutter complete all as specified and directed. Note: Wire mesh and glass panes shall be measured and paid for separately.

S&F pre-laminated particle board 9mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with snap beads/ screws to aluminium frame work as in panel inserts fixed in repairs complete all as specified and directed.

S&F pre-laminated particle board 18/ 19mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with snap beads/ screws to aluminium frame work as in cupboards and kitchen cabinets fixed in repairs complete all as specified and directed.

M&L for cleaning the wall surface by removing dust, dirt, oil, grease and all loose particles etc. by mechanical means including removal of loose concrete, making good the damaged portion with PCC (1:2:4) type B-0 and application of rust removing paint on exposed reinforcement and vacuum cleaning, cutting 'V' groove, filling the grooves with Dr Fixit Crack-X paste and all separation gaps with Dr Fixit Super Latex modified mortar, applying one coat of Dr Fixt Prime Seal Primer coating and then two coats of Dr Fixit Rain Coat (Exterior Wall Water Proof Coat) all as per manufacturer's instruction upto a height of 10m from ground level complete all as specified and directed. Note: Quoted rates are deemed to include for double scaffolding and work shall be carried out by authorised applicator of the manufacturer.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to outside MD land etc., complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm stone graded aggregate as in plinth protection including filling of joints by bitumen and sand in ratio (1:2) complete all as specified and directed.

M&L for 18 - 20mm thick machine cut granite slab (of any type), laid over and including 20mm thick cement screed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in floors including cutting and polishing etc., complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in skirting/ dado laid over and including 10mm thick backing coat in cement mortar (1:3) jointed with grey cement slurry and pointed with white cement with mixture of pigment to match the shade of granite cement including grinding and polishing complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like laid over and including 20mm thick screed bed in cement mortar (1:6) laid in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including cutting & polishing including provision of hole for gas pipe complete all as specified and directed.

M&L for rounding to edges of granite stone slabs, such as in steps, cooking platform and other similar situations all a specified and directed.

M&L for Non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per Item No. 36.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3) complete.

S&F coloured glazed designer ceramic tiles as in vertical surfaces of size 300mm x 600mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Taking down cement plaster on brick work or stone walls etc. including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex Ultima of Asian or Weather coat of Berger or equivalent of other specified makes) over and including a coat of white primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of plastic emulsion paint of (Royale emulsion of Asian) over a coat of white primer and 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/ wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/ wooden beads as directed in squares n. exc. 0.50 Sqm in each pane including hacking out old broken glass panes complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface any description exc. 10cm width or girth including preparation of surface complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

S&F in replacement 1000 ltr capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position duly provided with and including checknuts for inlet and outlet pipes complete all as specified and directed.

S&F in repairs ball brass valve for 25mm bore pipe high pressure with polyethylene high density float and complete screwed for iron pipe complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 25mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F 15mm dia bib taps cast copper alloy, fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed. Make: Jaquar Cat No. QQT-CHR-7037 or equivalent from other makes specified in particular specifications

S&F in repairs 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as per Cat No. CON-021 of Jaquar or Cat No. 8304 of Prayag complete all as specified and directed.

S&F 15mm PVC connection 450mm long with brass nuts fixed in repairs complete all as specified and directed.

S&F in repairs CP bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipes and wall flange as per Cat No. ALD-769L300 x 190 of Jaquar or Cat No. BEA-26 of Prayag complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer 3-in-1 with connector for hand shower arrangement, connecting legs, wall flanges and wall bracket for hand shower complete all as specified and directed. Make: Jaquar Cat No. CON-267KN or equivalent from other makes specified in particular specifications.

S&F in repairs 15mm dia brass chromium plated angle cock with flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as per Cat No. CON-053KN of Jaquar or Cat No. 8310 of Prayag complete all as specified and directed.

S&F in repairs chromium plated tumbler holder as per Cat No. CAN-1141N of Jaquar or Cat No. BA-26 of Prayag complete all as specified and directed.

S&F in repairs overhead shower 100mm dia round shape multi flow (ABS body chromium plated with grey face plate) with rubit cleaning system fitted with and including shower arm as per Cat No. OHS-1999 (shower) and SHA-477 (Arm) of Jaquar or Cat No. BOS-11 (shower) and BOS-47 (Arm) of Prayag complete all as specified and directed.

S&F in repairs hand shower 105mm dia round shape single flow with air effect (ABS body and chromium plated face plate) with rubit cleaning system fitted with and including 1.5m long chromium plated flexible pipe and premium wall bracket as per Cat No. HSH-1717 (shower), SHA-555 (flexible pipe) and SHA-571 (wall bracket) of Jaquar or Cat No. BHS-96 of Prayag complete all as specified and directed.

S&F in repairs brass chromium plated towel ring as per Cat No. 1121BN of Jaquar or Cat No. BA-11 of Prayag complete all as specified and directed.

S&F in repairs health faucet (hand shower) with 1.2metre long flexible tube with wall hook, chromium plated as per Cat No. ALD-563 of Jaquar or Cat No. BEA-85 of Prayag complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder with flap recessed type chromium plated as per cat No. ACN-1153S of Jaquar or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. 1131N of Jaquar or Cat No. BA-25G of Prayag complete all as specified and directed.

S&F in repairs corner glass shelf 300mm (with ABS brackets) matt finished chromium plated (MCH/ colour CP) with bracket end fittings as per Cat No. ACN-1173 of Jaquar or Cat No. BEA-46 of Prayag complete all as specified and directed.

S&F in repairs glass shelf 600mm long as per Cat No. ACN-1171N of Jaquar or Cat No. BEA-51 of Prayag complete all as specified and directed.

S&F in repairs PTMT waste coupling (half or full threaded) 32mm/ 40mm bore suitable for wash basin, kitchen sink and urinals (minimum weight 32mm- 45gms/ 40mm- 60 gms) all as specified and directed.

S&F in repair PVC cabinet mirror of size 330mm x 430mm with shelf as per Cat No. 551 of Parryware or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repair 900mm x 950mm bevelled edged looking mirror 6mm thick with designed wooden frame work alround fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs vitreous china wash basin of size 600mm x 450mm of Make Parryware Cube model Cat No-C844E or equivalent from other makes specified in particular specifications including 19mm thick granite top and moulding with supporting wall, waste coupling, waste pipe and brackets etc. complete all as specified and directed.

S&F in repairs towel rail 600mm long between flanges, brass chromium plated fixed with brass screws as per Cat No. 1111NM of Jaquar or Cat No. BA-40 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated two way angle stop cock with flange, screwed down, high pressure with crutch or butterfly handle, fancy type with long shank screwed both ends for iron pipe or for union as per Cat No. 1121BN of Jaquar or Cat No. 8311 of Prayag complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including demolition and breaking up existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) bend any radius all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

M&L for chipping of loose concrete, carefully broken plastering in Chajjas, ceiling, fins and fascias and applying one coat of rust remover using DR FIXIT rust remover and applying one coat of DR FIXING PIDICRETE concrete MPB bonding agent and Rendering 25mm thick in cement mortar (1:4) in two coats i.e. 10mm & 15mm thick as in repairs of chajjas, ceiling, fins, etc. including application of three coats of white wash after preparation of surface upto a height of 10m from ground level complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work including removal of rubbish outside MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. including removal of debris to outside MD land complete all as specified and directed.

Dismantling wall/ ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.

G.L.THIRUMALAI NAIDU AND COMPANY

M/s.Sai Agency

KS CONSTRUCTIONS