Construction of 5th Floor and Completion of Lower Ground Upper Ground Mezzanine and 1st Floor of the Library MBA and Mass Communication Deptt. Building in J.C. Bose University.

Amount

Providing and Fixing SS finish door stopper - Model Ozone make or Dorma, dorset, Godrej with the Prior approval of Engineer-in-Charge. NS Item

RO Room

Mumty & ro water tank room

5th floor

1st floor

mezzanine floor

upper ground floor

lower ground

Providing and Fixing Door Closer 60 kg Tto 90 kg of Ozone make or Dorma, dorset, Godrej with the Prior approval of Engineer-in-Charge. NS Item

5th floor

1st floor

upper floor

lower ground

mezzanine floor

Providing and fixing floor drain with jali (pp) as per I.S:14735:1999 marked of Make: Supreme/Prakash as per prior approval of Engineerin charge. (N.S ITEM)

Ro room

Mumty & ro water tank room

5th floor

1st floor

Mezzanine floor

upper floor

lower ground

Providing & fixing Hand shower (Health faucet) with 1.0m long easy flex tube in chrome finish & wall hook (model no. ALD-565) Make: Jaquar or equivalent with prior approval of Engineerin charge. NS APPROVED 42.00

5th floor

1st floor

upper floor

Supply and fixing SS Ball Bearing Hinges of size 100 x 75 x 3mm complet with SS Screws of BB1953 e ( 4 Nos per panel ) (Required For All Doors). Make Ozone, Dorma, dorset, Godrej with the Prior approval of Engineer-in-Charge. NS Item

RO Room

Mumty & ro water tank room

5th floor

1st floor

mezzanine floor

Upper floor

lower ground

Supply and fixing Stainless Steel 304 grade 300mm Long Tower Bolt of with necessary screws as required Make - Becker F.S or equivalent with the prior approval of engineer-in-charge. (N.S.ITEM)

RO Room

Mumty & ro water tank room

5th floor

1st floor

mezzanine floor

Upper floor

lower ground

Providing and Fixing Pull handle 240 mm - Model Make Ozone, Dorma, dorset, Godrej with the Prior approval of Engineer-in-Charge. NS Item

RO Room

Mumty & ro water tank room

5th floor

1st floor

Mezzanine floor

Upper floor

lower ground

Providing and Fixing Aldrag 10" Make Ozone, Dorma, dorset, Godrej with the Prior approval of Engineer-in-Charge. NS Item

RO Room

Mumty & ro water tank room

5th floor

1st floor

Mezzanine floor

upper floor

lower ground

Providing and Fixing Back rubber with the Prior approval of Engineer-in-Charge. NS Item

RO Room

Mumty & ro water tank room

1st floor

Mezzanine floor

Upper floor

lower ground

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. (NS Item) FLOOR TRAP WITH TOP TILE & STAINER(100mm)

5th floor

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. (NS Item) FLOOR TRAP WITH TOP TILE & STAINER(125mm)

5th floor

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. DOOR TEE

5th floor

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. DOOR BEND (TS)

5th floor

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. BEND 87.5 °

5th floor

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. DOOR CROSS TEE

5th floor

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. COUPLER

5th floor

Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. Make Supreme/Prince/Prakash or equivalent as per prior approval of Engineer-in-Charge. DOOR CAP

5th floor

Providing and fixing Ist quality ceramic glazed wall tiles in skirting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. Make: NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK as per prior approval of Engineer-in-Charge. (Basic cost 404.90 Rs./Sqm) a)Size of Tile 300 x 600mm. NS Item

5th floor

1st floor

Mezzanine floor

upper floor

Providing and laying HDPE (PE) pipe PE-63 6kg/cm2 class III (IS:4984-1983) including injection molded fittings where required e.g. clean out plugs, tees, bends, couplings and adapters and jointing with adhesive approved by fittings manufactures including necessary MS clamps of 40mmx5mm thick flat, cutting chases holes in brick & R.C.C. walls and making good the same with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished smooth. Earth work excavation & refilling etc. (for RWP and Sink Drain) make as per prior approval of Engineer-in-Charge.NS Item

RO Room

Providing and fixing solid laminated flush door shutters having uniform thickness of 37mm with smooth finish and moisture content 10 to 12% with water absorption of 2%, climate stable, warp and bend free as certified by IS-2202 with 1mm HPL conforming to IS - 2046 including , screws chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position). Make: Greenlam, century make, duro as per prior approval of Engineer-in-Charge (N.S ITEM).

Ro room

Mumty & ro water tank room

5th floor

1st floor

Mezzanine floor

upper floor

lower ground

Providing and fixing in position Angle Valve (model No.CON-059KN) of Make Jaquar or approved by Engineer-in-Charge. (N.S ITEM)

5th floor

1st floor

Mezzanine floor

Upper floor

Providing and fixing in position two way Bib cock for and hand shower (model CON-041KN) of Make Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)

5th floor

1st floor

mezzanine floor

upper floor

Providing and fixing in position Bib cock with wall flange (model CQT-23047) of Make Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)

5th floor

Providing & fixing under counter Basin (model No. CNS-WHT-705) of Make Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)

5th floor

Providing and fixing in position Bottle trap (model no.ALD-769L300x190) with internal partition 32mm size with 300mm & 190mm Long wall connections pipes & wall flange and waste coupling(model no.ALD-705L130) 32mm size full thread with 130mm Height of of Make Jaquar or equivalent with prior approval of Engineerin charge. (N.S ITEM)

5th floor

Providng 10 mm thick plaster of pairs celling up to a height of 5m above floor level, over G.I frame of size 25 x 50 mm

upper floor

Supplying and fixing 10mm thick multiwall polycarbonate sheet roof cladding at all levels as per pattern for skylight roof cladding and specials with necessary aluminium extrusions with EPDM gasket, cutting, fabricating, erection at all levels with paintings all fixtures and fixing accessories such s self drilling, self taping fastener including cost of all materials, tools, tackles, equipment, preparation of shop drawings etc. all complete as per specifications and as directed Make-Apollo tubes/Jindal Sheet-CoxWell/Carboron or equivalent make as per prior approval of Engineer-in-Charge. (FOR RAMP ROOFING). (N.S.ITEM)

Mumty & ro water tank room

road entry

Providing and fixing factory made Single Extruded WPC (wood polymer composite) solid door/ window/ ceosetory window. Frames/ chaukhat comprising of Virgin PVC polymer of K value 58-60 (suspension Grade) calcium carbonate along with natural Fibers (rice husk and wheat husk) along with non-toxic additives (maximum toxicity index of 12 in 100 grams). Having a density of 850 kg/cum, screw holding strength of 2200N (face) and 1100N (edge) minimum compressive strength of 58 N/mm2, Tensile strength of 11 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category, Limiting Oxygen index of 39%, property of being Termite and Borer Proof, Water/Moisture proof, Fire Retardant. All Door and Window Frames should be GRIHA approved, lead free and asbestos free.Toilet- Make:- Alstone/Relwood/Rajshree make as per prior approval of Engineer-in-Charge. Frame Size (mm):- 125X62

5th floor

1st floor

upper floor

Lower ground

Civil Works:- Providing and fixing of Wooden fire rated doors as per BS:476 Part- 20 & 22 & IS 3614 part-1 & part-2 for stability, integrity and thermal insulation. 03 Criteria Wooden door confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI for maximum rating of 2hrs tested either with or without vision panel. Individual Test certificates should be available for glass used in vision lites confirming the required fire ratings.Any deviation in specification other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Navair International Ltd or equivalent subject to architect’s approval. And should be ISO Certified company.

(The same can be pasted with 1mm thick laminate (as per approved shade) or replaced with 4mm thick teak ply as per clients requirement at an extra cost) on both sides of the shutter, with 50mm x 10mm hard wood lipping all round the shutter. r. The rebate shall be of 20mm x 54mm in the Door Frame to accommodate the shutter . Both frame and shutter shall be fitted with intumescent Fire seal strips , The shutter fitted with 20x4mm Fire seal and Frame with 2 no. Fire seal of size 10x4mm on all the three sides of the except bottom. The pasting of the ply/veneer/laminate should be done using automatic machine and should be free from any nails or perforations. (Main Hall Doors) . Navair, Kutty Make with the prior approval of engineer-in-charge. (N.S.ITEM)

5th floor

LIGHTING FIXTURES:- Providing of 20 watt batten Aluminium/ IP 20 complete in all respect with the prior approval of EIC.Make:- Eveready, Havells, Phillips

Ro Room Terrace

Stairs 1

Stairs 1

Proving & fixing 15 watt surface Dl/ panel + surface ring/IP 20 complete in all respect with the prior approval of EIC.Make:- Eveready, Havells, Phillips

LGF- Reading room

LGF-Canteen

UGF Balcony

Drinking galary projection

M+F toilet

Balcony outside reception

Reception

Corriodr+ lift lobby

Mezzenine balcony

Staff toilet

Drinkin galary

Corriodor Lift lobby

Reception below

Lounge below

1st floor -Balcony

lift lobby

Stair 1

Drinking

Staff toilet

M+F toilet

5th floor-COE+ Server + Toilet + Strong room

Terrace balcony

M+F toilet

Corridor

lift lobby coridor

balcony

stair 1

Providing & Fixing of 10 watt Bulk Head/IP65 complete in all respect with the prior approval of EIC.Make:- Eveready, Havells, Phillips

Electrical duct

RO Room

Supply of 35 mm 4 core unarmoured cable make:- Grandlay, havells, Polycab complete in all respect with the prior approval of EIC.

Same as HSR No.5

Supply of 50 mm 4 core unarmoured cable make:- Grandlay, havells, Polycab complete in all respect with the prior approval of EIC.

P/f of 200 w LED light IP 65 make eveready Havells complete in all respect with the prior approval of EIC. Make:- Eveready, Havells, Phillips Building Outside

Providng & fixing of Flexible pipe 25mm with the prior approval of EIC. Make:- Polycab, Polypack

2 x 2 light

15 watt light

Exaust fan

Electrical duct

Providing of 2 x 2 LED light 36 wt complete in all respect with the prior approval of EIC. (Included GST) Make:- Eveready, Havells, Phillips

LGF- Reading room

LGF-Canteen

UGF-Librarien room

Staff room

Control room

Electrical room

Reception

Mezzenine - Binding room

South library side

Store

Mezzenine - Book Bank

Mezzenine - computer lab 1 & 2 south

Mezzenine - study Carrel

Mezzenine -computer lab north side

Reception below

Reading room below

1st floor -Discussion room

1st floor -Casual sitting

1st floor -Computer lab

Reading room

1st floor -Reception

1st floor - Hall

Room 1,2 & 3 South side

Acquisition room

Corridor

5th floor -Waiting room

cabin 1 to 16

A.R room

Registrar room

PA Room

PS room

5th floor-COE+ Server + Toilet + Strong room

Store / Strong room

Metting room

FIRE FIGHTING WORK: Supplying and laying the PVC insulated and sheathed armoured cables of 1.1 K.V. aluminium conductor including supplying and making end termination with brass compression glands.

25 sq.mm x 3.0 core NS ITEM

Providing, fixing, jointing and testing of heavy gauge M.S. ERW black pipes as per relevant IS: 1239 with special accessories like tees, elbows, welded joints for pipe and fitting and flanged joints rubber insertion nuts & bolts, washers for valves including earth work excavating refilling compaction etc. and treating under ground pipe with two coats of anti corrosive paint and wrapping 4mm thick PYKOTE on pipe fitting etc. complete in all respects. Thrust blocks of cement concrete at bends, tees etc. 150mm thick around in 1:2:4 (1cement: 2 coarse sand: 4 stone ballast 20mm and down gauge ). NS Item

100 mm dia ( IS1239 ) welded joint

Providing, fixing, welded joints and testing of heavy class M.S. ERW black pipes as per relevant IS 1239/3580 with special accessories tees, elbows, screwed/flanged joints, expansion joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members, dash fastener, civil breakage, making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required.NS Item

100 mm dia welded joint

80 mm dia welded joint

50 mm dia screwed joint

Providing and fixing single headed hydrants flanged inlet with 63 mm female instantaneous outlet of stainless steel with bolts, nuts, washers etc complete with male blank caps, chains conforming to IS:5290 type A with stainless steel orifice plate to keep the pressure not more than 3.5 kg/sq.cm at any point. NS Item

Providing & fixing non-perlocating, rubber reinforced lined fire hose pipe (as per IS 636) type B of 63 mm dia and 15 m length as described below. The hose shall be rated for burst pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked stainless steel male & female coupling (IS:903) bound & riveted to hose pipe with copper wire (Location : Internal fire hydrant) NS Item

Providing and fixing controlled percolation fire hose pipe (as per IS:8423) of 63 mm dia and 15 meter length rated for burst pressure of 35.7 Kg/sqcm. The hose shall be tested for flame resistance test in accordance to IS:8423. Hose shall be complete with ISI marked stainless steel male & female coupling (IS:903) bound & riveted to hose pipe with stainless steel rivets & 1.5 mm stainless steel wire (Location : External fire hydrant) NS Item

Providing and fixing standard short size stainless steel branch pipe with 20mm dia nozzle conforming to IS:903. Suitable for installation connections to hose coupling etc. as required. NS Item

Providing and fixing Cast Iron body IS: 210 FG 220 and double flange simple operation type Butterfly Valve conforming to IS: 13095 with SS304 disc and shaft nitrile rubber replaceable seat of the following size complete with bolts, nuts, washers and rubber insertions as per specification. NS Item

50 mm dia

80 mm dia

100 mm dia

Providing and fixing non-return valve C.I. Body complete with bolts, nuts washer & rubber insertions as required conforming to IS:5312. NS Item

100 mm dia

Providing and fixing air release valve complete as directed by Engineer in charge. 25 mm dia NS Item

Providing and fixing 0-14 kg Pressure Gauge of 100 mm dia including making necessary hole accessories etc. NS Item

Providing and fixing Fire Man axe as required with Test Certificate of 20,000 volts. NS. Item

Providing and fixing of single arc expansion joints (rubber below) of following size complete with nuts, bolts and washers etc. NS. Items

100mm dia

Bidder Name

Amount

Rajesh Kumar Batra Contractor(GSTN-06AFJPB2634M1ZI)

Sh. Shanker Singh Tomer(GSTN-NA)

Sh. Virender Singh Lohchab(GSTN-NA)

Sh. Virender Singh Lohchab

Sh. Shanker Singh Tomer

Sh. Virender Singh Lohchab

Sh. Shanker Singh Tomer