Construction of Kisan Bhawan/Internet Kiosks/Agriculture Sale Center Jathia Devi at Jubbarhatti District Shimla HP

Amount

Cutting in earth work in all kinds of soils by mechanical means (Hydraulic excavator) / manual means and disposal of excavated earth up to all leads and lifts as directed by the Engineer-in-charge.

Excavation in foundation and trenches etc.in all kinds of soils such as pick work, jumper work, blasting in soft / hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth up to all leads and lifts as directed by the Engineer-in-charge.

Providing and laying in position cement concrete 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering complete as directed by the Engineer-in-charge. :

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand) in breast walls and retaining walls including carriage complete as directed by the Engineer-in-charge.

Stone filling behined R/wall with stone / boulders including carriage complete as directed by the Engineer-in-charge.

Providing PVC pipe 3" dia for weap hole in R/wall with carriage complete as directed by the Engineer-in-charge..

Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shutteringcomplete as directed by the Engineer-in-charge. :

Boulder filling/ stone soling over rammed earth dry hand packed tightly and consolidated manualy complete including carriage of materials as per the direction of Engineer-in-charge.

Providing From work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centring shuttering structting and propping etc with wooden battens and balies,height of propping and centring below supporting floor to celling not exceeding 4 metres and removal of the same for insitu reinforced concrete and plain concrete work complete as directed by the Engineer-in-charge in:-

a) Foundations, footings, bases of columns, etc. for mass concrete

b) Columns, Pillars, Piers, Abutments, Posts and Struts

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers

d) Suspended floors, roofs, landings, balconies and access platform

e) Stairs, (excluding landings) except spiralstaircases

f) Edges of slabs and breaks in floors and walls

Providing and laying in position of specified grade M25 (1 cement:1.5 sand:3 graded stone 20mm nominal size) of reinforced cement concrete, excluding the cost of form work, centering, shuttering finishing etc.and reinforcement complete including carriage of materials as per the direction of Engineer-in-charge in-

a) In foundation and plinth. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

b) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

c) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

d) stair case. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade (1:2:4) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

a) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding etc. including carriage of materials up to all leads and lifts complete as directed by the Engineer-in-charge in.

Brick work with common burnt clay F.P.S. (non modular)/ rat-trap bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials as directed by the Engineer-in-charge in:-

Half brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in: Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials as directed by the Engineer-in-charge in:-.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of materials as directed by the Engineer-in-charge in:-. Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws etc complete including carriage of materials as directed by the Engineer-in-charge in:-

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws etc. complete including carriage of materials as directed by the Engineer-in-charge in:-.

Kiln seasoned and chemically treated hollock wood 35 mm thick

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including carriage of materials as directed by the Engineer-in-charge in:- Kiln seasoned and chemically treated hollock wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 6 graded stone aggregate 20mm nominal size). 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size)

Providing and fixing Godrej make (corrosion resistant) or equivalent 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing Godrej make (corrosion resistant) or equivalent 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing ISI marked Stainless steel sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing ISI marked Stainless steel tower bolts (barrel type) with necessary screws etc. complete including carriage of materials within all leads and lifts

Providing and fixing ISI marked Stainless steel handles with screws etc. complete including carriage of materials within all leads and lifts: 125 mm

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded girth and finished even and smooth in CM 1:6 mix.

6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand)

20mm cement plaster in single coat on rough side of brick/stone masonry for exterior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in firth and finished even and smooth. 1:6 cement motar.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer complete in all respect.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required complete including carriage of materials as directed by the Engineer-in-charge in:-.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) including carriage of materials complete as directed by the Engineer-in-charge in:-.

Size of Tile 600x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of materials as directed by the Engineer-in-charge in:-.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone Skirting or dedo in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 12 mm (average) thick cement mortar 1:2 (1 cement : 2 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting.

Readymixed paint brushing wood primer pink

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with readymixed paint, brushing to give an even shade including cleaning of all dirt dust and other foreign matter sand papering and stopping.

Readymixed paint with other than white

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Distempring two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on un-decorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacturer after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials with in all leads and lifts

Two or more coats on new work

Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

Providing and fixing ball bearing for rolling shutters.top cover

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Providing and fixing Cast SFRC Manhole coverhaving size of 560mm internal dia ( Heavy duty) with in all leads and lifts complete in all respect.

SCHEDULE-B (INTERNAL ELECTRICAL FITTINGS)

Wiring for light point/ Fan point/ Exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated copper conductor cable in surface/ recessed PVC condute as required.

Group C

Wiring for circuit wiring with 2x1.5 Sq.mm PVC insulated copper conductor, single core cable in surface/ recessed PVC condute as required.

Wiring for submain wiring with 4x6 Sq. mm size of PVC insulated, copper conductor, single core cable in surface/ recessed PVC condute as required.

Wiring for light point/ power plug wiring with 2x4 Sq.mm PVC insulated copper conductor single core cable in surface/ recessed PVC condute along with 1 number 2.24 mmdia bare for loop earthing as required.

Wiring for light point/ power plug wiring with 4x4 Sq.mm PVC insulated copper conductor single core cable in surface/ recessed PVC condute along with 2 number 2.24 mm dia bare for loop earthing as required.

Supplying and fixing modular G I boxs of following sizes along with modular base and cover plate for modular switches in recess as required.

i) 2 Modules 78mmx78mmx50mm

ii) 4 Modules 140mmx78mmx50mm

iii) 6 Modules 205mmx78mmx50mm

iv) 3 Modules 78mmx102mmx50mm

Supplying and fixing ceiling rose or the existing junction box/ wooden block including connections etc as required.

Supplying and fixing wall brackets of all sizes and shapes containing two GLS lamps per fittings with all accessories including connections etc. as requiared.

Supplying and fixing call bell/ buzzer and piano type bell push, suitable for DC/AC single phase, 230 volts, complete as required.

Supplying and fixing 5 amps to 32 amps rating, 240 bolts, "L" Series, miniature circuit brakers of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required (Category-A)

Supplying and fixing following rating double poles and four pole, 240/415 bolts, EL+MCB combination unit having sensitibity up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissionings etc.as required.

63 ampres four poles (Category-A)

Supplying and fixing of follwowing way, single pole and neutral, sheet steel, MCB distribution board, 240 bolts on surface/ recess, complete with tinned copper busher, neutral link, earth bars, din bar, detachable gland plate, inter connection, including painting earthing etc. as required:

12 ways Double door

Supplying and fixing modular blanking plate on the existing modular G I box as required.

Earthing with copper earth plates 600mm x600mmx3mm thick including accessories and providing masonary enclosure with cover paltes having locking arrangement and watering pipes etc. ( but without charcoal of coke and salt) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode as required.

Providing and laying earth connections from earth electrode with 4.00 mm dia, copper wire in 15mm dia GI pipe from earth electrode as required.

Providing, installation, testing and commissioning of prewired LED tube fitting, complete with ballast, starter and capacitors including LED tube rod, suitable to operate on 230 volts, single phase-AC supply directly on surface with copper wiring as required.

F/Tube fixure, 1x40 watt, box type, Category-A

Supplying and fixing Ding- Dong, electronic musical call bell and piano type bell push, suitable for DC/AC single phase, 230 volts complete as required;

Call bell Ding-Dong, category-A

Providing and installation of Exhaust fan with louvers/ shutters and frame, in the existing opening, including making the hole to suite the size of the fan, making good the damage, connections, testing commissioning etc.as required.

i) Light duty 225mm Sweep

ii) Heavy duty 300 mm sweep

Providing and fixing of stationary storage type electric water heater, complete with deat weight safety valve and non return valve by means of rag-bolts with nuts and washers, including embedding of rag-bolts in the wall, making good the damages, electrical connections safety valve connections testing and commissioning etc. as required.

Geyser 25 litres Capacity, Category-A

SCHEDULE-C (WATER SUPPLY & SANITARY INSTALLATION)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

I) INTERNAL WORK- Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

II) EXTERNAL WORK-Exposed on wall

25 mm nominal outer dia Pipes

75 mm nominal inner dia Pipes

100 mm nominal inner dia Pipes

Providing and fixing MS holder bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including

For 100 mm dia pipe

For 75 mm dia pipe

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

Providing and fixing ball valve quality, High or low pressure, with (brass) of approved plastic floats complete: 20 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing Towell rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass. 750x20mm

Providing and fixing Towell ring complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass. 750x20mm

Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with with C.P. brass screws.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe Flexible pipe

Providing and fixing 100 mm Stainless Steel grating with frame for floor trap

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder : C.P. brass

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

rupinder justa govt contractor

Rajesh Thakur