PROVISION OF VOCATIONAL LAB AT PM SHRI KENDRIYA VIDAYALAYA AYODHYA CANTT

Amount

Surface excavation in soft / losse soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating over areas, in soft / loose soil n exc 1.5 m deep and getting out in loose soil complete as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers,soil not exc 25 cm.complete as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point .complete as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in foundation, fillings and mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in foundation of plinth beam, fillings and mass concrete complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns,plinth beams and similar work; vertical or to batter finished rough surface of concrete as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Use and waste of form work to chajjas rough surface of concrete complete all as specified and directed.

Use and waste of form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal finished rough surface of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs and similar work; not exceeding 200m thick flat finished rough surfaces of concrete.

Use and waste of form work to the edge of concrete flat exc 10 cm but n.exc 20 cm wide complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed

S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for stirrups,spacers & binders binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for RCC M-25 using 20 mm graded stone aggregate as in footings, plinth beam, bases for columns and mass concrete complete all as specified and directed.

M&L for RCC M-25 using 20 mm graded stone aggregate for roof slabs, lintels and slabs supported on walls including roof beam and similar work complete all as specified and directed.

M&L for RCC M-25 using 20 mm graded stone aggregate for chajjas and similar work complete all as specified and directed.

M & L RCC M25 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span similar work

M & L RCC M 25 using 20 mm graded stone aggregate as in Columns, pillars and similar works complete all as specified and directed.

M & L RCC M 25 using 20 mm graded stone aggregate as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed

M&L providing, cement concrete type B1 using 20mm aggregate in lintels upto 1.5m clear span, cills, steps; eismic and other similar bands, plinth courses, string courses, lacing ourses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L brick work with fly ash bricks, straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L applying two coats of Plastic emulsion paint with 2mm putty on walls over coat of primer on new plastered surfaces including necessary preparation of surfaces as directed

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions (WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for waterproof cement based putty @ 1 Kg (undiluted ) per sq mtr. of average thickness 1mm over the plastered by skilled labour as directed by Engineer-in-Charge. Make of Manufacturer : ASIAN/ BERGER/ NEROLAC.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 20 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm as directed by Engineer-in-Charge.

M&L Rendering but 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement.

M&L Preparing New surfaces & applying three coat of a white wash on ceiling all as specified.

M&L for 10mm thick rendering on fair faces of brick work or on concrete surface in CM 1:3 finished surface even and smooth without using extra cement, mixed with liquid water proofing compound @ 100 ml per 50 Kg of cement bag complete all as specified and directed. Note : WPC will be measured and paid separately.

M&L for priming over roof surface @ 0.25 Ltr/Sqm over a cleaned roof surface and applying one coat of bitumen painting with hot blown grade bitumen 85/25 @ 1.20 Kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric ( wt not less than 150gms/ sqm) land on primed surface by forced application complete all as specified and directed.

M & L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor,coping and for fixing of hold fast etc complete all as specified and directed

S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, ection 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified

S & F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat all as specified and directed .

S&F Butt hinges 100mm long medium weight, colled rolled mild steel.

S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked.

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F galvanised mild steel wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer of any description exc 10 cm width or girth complete all as specified

S&F sliding bolt 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F for powder coated (thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

M&L for 4.00 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 75 mm PCC type C-2, 1:3:6, using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement concrete surface even and smooth including forming construction joint 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed

M&L broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete as specified and directed.

Supply only Integral waterproofing compound.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Sand filling under floors or in foundations spreading and levelling in layers n exc. 25cm thick including watering and consolidation complete all as specified and directed.

M&L for 75 mm th PCC 1:4:8 type D-2 as in under floor Sub base.all as specified & directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 as in under floor Sub base.all as specified & directed.

M&L double chared virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles xceeding 0.36 sqm but not exceeding 0.42 sqm,over 15mm thick screed cement mortar (1:6) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M&L double chared virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles xceeding 0.36 sqm but not exceeding 0.42 sqm,over 10mm thick cement mortar plaster CM (1:3) in skerting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M&L treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed by the Engineer-in-Charge.

Treating the backfill in contact with foundation at the rate of 7.5 litres of eulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured complete all as specified and directed by the Engineer-in-Charge.

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface ® complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

S & F Vitreous China wash basin, white, flat back, of size 550x450mm including brackets(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply compete all as specified and directed. (make-Cera,Perryware and other equivalent make etc)

S&F waste pipe for wash hand basin 32mm/40mm dia compete all as specified and directed.

S & F powder coated aluminium grills of approved design and pattern, with approved standard section fixed to the window frame all as specified by Engr-in-Charge

S & F Rotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical triple layared white coloured vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete, ISI marked, all as specified and directed.(Make -Prayag and equivalent) complete all as specified and directed

M&L for joist,channel,angle or tee sections, flat iron including two hinges size 100 mm and locking arrangement of monkey caging for PVC water tanks, door frame for fixed independently connecting as reqd forming holes and welded attachment and curved shaped by welding making jointless by filling including cutting etc conforming to Fe- 290 (Gde-E-165) i directed by Engr-in - Charge complete all as specified and directed.

S&F for welded steel wire fabric weight per sqm metre n.exc 4.00 kg complete to wood or steel members complete all as specified and as direccted.

S & F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement.

S & F 110mm PVC (SWR) WC connector with lip ring

S & F PVC (SWR) 110 mm bends any radius

S & F PVC (SWR) 75 mm bends any radius

S & F 75mm PVC (SWR) pipe single soocketed, in any length with rubber ring joints, laid in trenches or in floors

S & F 110mm PVC (SWR) pipe single soocketed, in any length with rubber ring joints, laid in trenches or in floors

S & F bottle trap of CP 32mm dia having minimum water seal of 25mm

S & F pillar tap 15mm dia cast copper alloy with clutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed

S&F 15 mm bore angle valves, cast copper alloy fancy type chromium plated, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F 15mm dia GI pipe medium grade with all fittings all as specified and directed.

S & F 20mm dia GI pipe medium grade with all fittingsall as specified and directed.

S & F soap dish, any type, fixed to plugs with chromiun plated brass screws all as specified and directed.

S & F ball brass float valves, high pressure, with polythelne float and fly nut in 20mm bore complete all as specified and directed.

S & F tubular towel rail 20mm dia 'D' type, 600mm long of CP fixed with and including CP brass screws and wooden/plastic cleats

M&L for rendering 15 mm thick on brick work or concrete surface in cement mortar (1:3) finished even and smooth without using extra cement.

Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 25 sqmm 4 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc complete all as specified and directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M & L for fly ash brick protection length of brick shall be laid across the length of cable) all as specified and directed.

S&F GI light grade tubing 40mm dia laid in trences,road crossing,passing through pipe or laid on pole.

Supply and errect 6 mtr long Hot dip galvanised octagonal pole with 130mm bottom A/F and 70mm top A/F made up of 3mm thick HT steel plate having base plate of 220x220x12mm thick alongwith Double arm bracket of 1000 mm length made up of 48.3x3.25mm thick plate, 4 Nos M20 x 700 mm GI 'J' type foundation with bolts,nuts,,including Foundation PCC Work/ Excavation complete.

Supply of Solar integral AIO streetlight with Aluminium housing, reliable & robust construction with IP65 & IK08 protection. The luminare Lithium /LifePo4 Battery capacity min [email protected] or 20w4.5v pv panel power CRI >=70, System Efficacy >165lm/W, & Minimum Lumen 4000 system wattage should not be more than 25 ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Weight not more than 2.32 kg . The fixture should have in microwave motion sensor &sensor dealy time 18 seconds Life class of LED 50000hrs@ SOLAR AIO STREET LIGHT 25 W complete all as specified and directed

M&L for concealed type point wiring with PVC insulated PVC unsheathed electric (FRLSH) copper wire of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLSH) having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system with apply the colour coding copper conductor including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

All as per Srl item No. 1.00 above but for one tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps.

All as per Srl item No 1.00 above but for One fan point / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per Srl item No. 1.00 but for One socket outlet point 6 A on same board.

All as per Srl item No. 1.00 but for one socket outlet point 6 Amps on independent board.

All as per Srl Item No. 1.00 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps non-modular switch on independent board complete all as specified and directed.

All as per Srl Item No. 2.00 here in before but concealed point wiring with 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps non-modular switch on independent board complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 16 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6 Amps flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6/16 Amps flush type complete all as specified and directed.

Supply & fixing of ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 08 protection, with provision of 16 KA 125 Amp G frame MCCB. Make- Legrand/Schneider/ABB with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge.

S & F of MCCB 4 Pole, 415 V, adjustable type thermal magnitic ICS100%, 125 Amps with breaking capacity 36 KA with connected assosieries etc. complete all as directed by Engineer - in - Charge. Conplete all as specified and as directed.

S & F MCB SP 40 Amps, 230 Volts C curve 10 KA, including necessary connection complete all as specified and as directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in -charge.Supply and fix epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S & F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection complete all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 16 to 32 amps, 240 Volts in proper position all as specified and as directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed.

Supply and fixing LED lamp 2 pin 9/10 watt.

M&L for sub main wiring with two runs of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.00 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

Supply and fix sheet metal enclosure with single pole and neutral with two pin and earth plug and socket along with a 20 to 30 Amps rated SP MCB, 230 volt, 50 HZ as required at site, complete all as specified and as directed.

Supply and fixing LED light fitting 1x22/25 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing inverter batten with square profile and polycarbonate channel lithium ion 1 battery with charging time 08hrs-100hrs and backup time up to 4 hrs indoor luminaire batten for wall / ceiling mounting box type energy efficient saving led batten light 20 watt including twin twisted copper conductor flexible wire from ceiling rose to connected complete all as specified and directed

Supply and fixing ceiling fans complete with blades, with down rods meter long, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) With remote control along with suitable size of battery for remote control system complete all as specified and directed.

Supply and fixing 1x36/40W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed.Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

supply and fixing Exhaust fan steel body AC Single phase 230 V of size 300 mm sweep with blades, frame and louvers including making hole in wall fixing accessories complete all as specified and directed

Supply,Laying, testing and jointing Galvanised steel water tubing 20 mm bore with screwed socket joints medium grade,together with all fitting (such as bends , elbows, tees, short pieces , connectors, back nuts, diminishing pieces, caps , wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required, cutting through walls, floors and their making goods to match with the existing specifications complete all as specified and as directed Make - TATA/ JINDAL/ PRAKASH/ZENITH

Supply,Laying, testing and jointing Galvanised steel water tubing 15 mm bore with screwed socket joints medium grade,together with all fitting (such as bends , elbows, tees, short pieces , connectors, back nuts, diminishing pieces, caps , wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required, cutting through walls, floors and their making goods to match with the existing specifications complete all as specified and as directed Make - TATA/ JINDAL/ PRAKASH/ZENITH

Supply and fix in repairs 20 mm dia gate valve (Gun metal glove valve ) with iron wheel head , screwed both ends for iron pipe and fixed for, complete all as specified and directed. Make-Scud/leader/Zoloto. Note : The quoted rate is deemed to be inclusive of cutting , threading , insertion of union joint , nipple etc for required size of pipe.

Supply and fix in repairs 15 mm dia gate valve (Gun metal glove valve ) with iron wheel head , screwed both ends for iron pipe and fixed for, complete all as specified and directed. Make-Scud/leader/Zoloto. Note : The quoted rate is deemed to be inclusive of cutting , threading , insertion of union joint , nipple etc for required size of pipe.

Horizontal boring in soft/loose soil/under roads of any width by manual arrangements for inserting GI pipe up to 20 mm bore for passing pipes complete all as specified and directed by Engr-in-Charge.

Jaya Construction (BID ID -3449220)

K R KAUSHAL AND SONS (BID ID -3440718)

M/S IQRA CONSTRUCTION (BID ID -3444081)