SPECIAL REPAIRS TO BLDG NO P-26A (COOK HOUSE AND DINNING HALL) OF NO-01 INF BN AT UDAIPUR MILITARY STATION

Amount

Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

-Ditto- all as per item No 01 above but area exceeding 1.50 Square metre and not exceeding 4.00 Square metre

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Supply & Fixing 0.50 mm thick galvalume aluminium zinc coating AZ-150 GI based corrugated steel coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws at every alternate corrugation as specified etc.

Supply & Fixing 0.50 mm thick galvalume aluminium zinc coating AZ-150 GI based plain steel sheet coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws at every alternate corrugation as specified etc.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

Supply and Fixed suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 6mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Demolition of cement concrete(unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required complete all as specified and directed.

Supply & Fixing 50mm bore GI Tubes, `medium grade' galvanise with all fitting & fixed complete to walls & ceilings, laid in floors or for hanging of suspender for roof ceiling complete all as specified and directed.

Material & labour coloured Non Skid ceramic jointless tiles of Size 300x300 of thickness 7 to 8mm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

Material & labour for Vitrified digital double charge tiles 605x605x10 mm thick, in floors etc. set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

Material & labour coloured Glazed ceramic tiles in vertical serfaces 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, complete all as specified and directed.

Material & labour Pre-Polished & Machine Pre-cut Kota stone slab flooring 18-22 mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6, complete all as specified and directed.

Material & labour Pre-Polished & Machine Pre-cut Kota stone slab 15-17 mm thick in riser of steps, skirting, dado and pillars etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

Material & labour for 15-18 mm thick green marble slabs on Window Cill/cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type

Material & labour for 18-20 mm thick 'Z' Black Granite slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type including half molded at corners

Material & labour for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in sub base of flooring etc, complete all as specified and directed.

Material and labour for 50mm thick, PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/PCC path, and paving, finished the surface even and fair without using extra cement, laid in alternate bays, complete all as specified.

Material & labour for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.

Material & labour for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.

Material & labour for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.

Supply & Fixing framed work as in doors or gates or framework for water tanks of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete confirming to gde Fe 290 (Gde E-165)

Supply and fixed 35mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified.

Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters (minimum 4 panels), open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge prepared to slide horizontally on beads including Supply & Fixing bead etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixing to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number and minimum 02 Nos. for horizontal member), complete all as specified.

Supply & Fixing factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame complete all as specified and directed.

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

Supply & Fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

Supply and fixing 200 mm mild steel barrel tower bolts, ISI marked, stove enameled black with bright bolt and fixed, complete all as specified.

Supply and fixing mild steel pressed handles, oval type, enameled black 150mm long, complete all as specified.

Supply and fixing 300 mm mild steel sliding door bolts, ISI marked, stove enameled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified.

Supply & fixed MS helical door spring150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame for and including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CECZ TD -219 sheet 1/3 to 3/3 as applicable complete all as specified and directed. Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Supply & Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed.

Supply & fixed for sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square n.exc 0.5 Sqm each and glazing with oil putty to steel window complete all as specified.

Supply & Fixing Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd. including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc, complete all as specified and directed.

Supply & Fixing 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod complete all as specified and directed.

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair, complete all as specified and directed.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair, complete all as specified and directed.

Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore all as specified and directed.

Supply & Fixing in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge. (Make: parryware/Jaquar/Prayag)

Supply & Fixing vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed. (Make:Parryware/Hindware/Jaquar/Prayag)

Supply & Fixing in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge. (Make:Parryware/Hindware/Cera)

Supply & Fixing in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

Supply & Fixing in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.

Supply & Fixing 15mm bore tubes medium grade galvanized with all fittings such as Tees, elbows, unions, sockets, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up old GI tubing all as specified and directed by Engr-in-charge.

Supply & Fixing 20 mm bore tubes medium grade galvanized with all fittings such as Tees, elbows, unions, sockets, short, lengths, plus etc. and fixed complete to walls and ceilings or laid in floors of any length including taking down or up old GI tubing all as specified and directed by Engr-in-charge.

Supply & Fixing in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Supply & Fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge.

Supply & Fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

Supply & Fixing in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified. (Make : Parryware/Jaquar/plumber/Prayag)

Supply & Fixing in repair rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.

Supply & Fixing in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed by Engr-in-charge.

Supply & Fixed in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified.

Taking down cement plaster from brick walls ,concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately)

Material and labour 5 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement all as specified and directed.

Supply only integral water proofing compound, complete all as specified.

Material & Labour for preparation of new plastered surfaces of wall and applying 1 mm thick Birla/JK wall care white putty in two layers for neat and smooth finishing including preparation complete all as specified.

Material & labour for applying two coats of distempering with acrylic distemper white or coloured on prepared wall surfaces (putty) complete all as specified and directed.

Material & Labour for preparing new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer/white wash complete all as specified.

Material and labour for preparation of old Plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified.

Material and labour for Preparation of old Plastered or un-plastered surfaces of walls ,cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash on walls complete all as specified.

Material & labour for applying 1 mm thick Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.

Preparation of old treated surfaces (plastered or unplastered) including complete removal of existing treatment of wall cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots old treated plastered surfaces of walls, cleaning of windows/ventilators glass panes & applying two coat of cement base paint complete all as specified and directed..

Material & labour for two coat of synthetic enamel painting to wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer cpmplete all as specified and directed.

Material & labour for two coat of synthetic enamel painting to steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified.

Material and labour Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of approved shade & quality complete all as specified and directed.

Material and labour Preparation of old painted steel or iron based surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint of approved shade & quality complete all as specified and directed.

Dismantling of any dia and size cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

Supply & Fixed for 100 mm bore cast iron soil waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

Supply & Fixed for 75 mm bore cast iron soil waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

Supply & Fixed cast iron bends 100mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixed cast iron bends 75 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixed 100 mm bore cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

Supply & Fixed 75 mm bore cast iron branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

Supply & Fixed 100mm bore cast iron bends with oval access doors (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixed 75 mm bore cast iron bends with oval access doors (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Material and labour in repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed.

Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition, complete all as specified.

Material and labour for providing reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate ) as in slab supported on wall,beam, cantilevers and kitchen cooking platform complete all as specified.

Material and labour for RCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in chajjas beams etc complete all as specified and directed.

Material and labour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Material and labour mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material & labour Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per description of Srl item No 13 above item but except bricks

Demolition of PCC as in roof padding etc over roof surfaces exc. 4 mtr height from ground level complete all as specified and directed.

Material & labour PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding & filling depressions etc & to maintain certain desired slopes.

Material and labour for carrying out water proofing treatment for roofs in the following stages and as directed :-

(i) Material and Labour for 10mm thick plaster in CM 1:4 with WPC will be applied over the roof slab. After the plaster is cured the roof will be tested for water tightness by pounding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment.

(ii) The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, moss dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls), around obstacles such as pipes, chimneystacks, etc and other similar situation to ease up about comers.

(iii) Bituminous based primer conforming to IS : 3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated.

(iv) After the application of approved bituminous primer the APP modified polymeric membrane of thickness 3 mm & weight not less than 3 Kg/Sqm shall be laid & sealed on the primed surface by torch application as per manufacture instructions. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be made as a monolithic layer.

(v) All joints and changes in direction should be curved with cement mortar 1:3 mixed with & including SBR latex @ 200ml per bag of cement and cured well before laying the membrane.

(vi) A fillet of PCC 1:2:4 of 100 x 100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/ junctions should be rounded. (vii) Applying two coats of silver shield aluminium based paint @ o.1 Kg/Sqm each coat over APP membrane.

Supply & Fixing Roof trusses (framed), trussed purlins crane gantries, railSupply & Fixingastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc fixed in poisition conforming to Fe-410 (Gde-250) complete all as speified and directed.

Material & labour anodised aluminium window sliding with two rack sliding, frame and two rack of powder coated aluminium section 61.85x31.75x1.20mm thick and shutter of powder coated aluminium section 18mmx40mmx1.20mm including necessary jointing cleats, glazing clips, rubber packing anodised snap beading, screw etc complete all as specified and directed. Note : Glass pane shall be measured and paid separately

Supply & fixed figured glass 5 mm thick, ordinary quality and glazing with rubber beading in square n.exc 1.00 Sqm each pane complete all as specified.

Supply & fixed for anodised aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with and including H or F channel all as specified and directed by Engr-in-charge.

Supply & Fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with waste pipe.

Supply & Fixing Waste coupling 32mm bore of PTMT (half or full threaded) min. weight 32mm-45gms) .

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by engineer in charge.

Material & labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified (Make of cable: Kalinga/Havells/Anchor) for One light point / Fan/ bell point controlled by one switch.

(a) One light point controlled by one 5 Amps switch

(b) One Fan point controlled by one 5 Amps switch

(d) One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size

(e ) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size.

(f) One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size

(h) All the item no 2(f) above but for One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size for geyser point

Supply & Fixing switch piano flush type single pole one way 5/6 Amps. Make : Anchor / Leader/ Kinjal.

Supply & Fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

Supply & Fixing lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply & Fixing socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply & Fixing of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one. Make : Anchor / Leader / Kinjal

Supply & Fixing socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one Make : Anchor / Leader /Kinjal

Supply & Fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor / Leader / Kinjal

Fixing LED integrated batten tube light fittings 20/22 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.Note: LED tube lights will be issued under Sch 'B'

Material & labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 8 way including dismantling old one. Make : Havells / Legrand / Schneider/Standard

Material & labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 4 way including dismantling old one. Make : Havells / Legrand / Schneider/Standard

Supply & Fixing RCBo'S DP 30mA 230 Volts 32 Amps. Make : Havells/Legrand/Standard/ C&S

Supply & Fixing MCB SPN 230 Volts 40 Amps. Make : Havells/Legrand/Standard/ C&S

Supply & Fixing MCB SP 230 Volts 6- 32 Amps. Make : Havells/Legrand/Standard/ C&S

Fixing LED lamp 9W system lumen (NOM) 600 with all accessories all as specified and directed by Engr-in-Charge. Note: LED Bulbs will be issued under Sch 'B"

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan

Supply & Fixing exhaust fans AC single phase 230/240Volts of size 150/200 mm sweep with louver and complete accessories ,including making hole with suitable size for Exhaust Fan, after completion of work, finishing with cement and plastering and repainting with exisitng color all as specified and directed by Engr-in-charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5core

Excavating in trenches n.exc 1.5 m width and n.exc 1.5m in depth for taking out cable and cable cover and getting out in any type of soil

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point

Material & labour for sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured

Material and labour for stone slab ( patti) roughly hammer dressed stone 25 to 35 mm thick 25 to 30 cm wide and not less than 60 cm long laid dry and abutting each other with gap between adjacem,ent salb not exceeding 10 mm over underground cables for protection.

Taking out old unserviceable protection Pipe and supply and fix light grade 40 mm dia GI pipe fix complete to Wall , Poles etc with suitable clamp for protection of cable complete all as directed

Supply & Fixing Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x1.5 sqmm FR PVC insulated copper conductor, single core cable in surface/recessed as required.

Supply & Fixing Submain wiring alongwith earth wire with the following sizes of 2x 4.0 sqmm + 1.25 sqm FR PVC insulated copper conductor, single core cable in surface/recessed as required.

Supply & Fixing LED security light luminaries of 25 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 1.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge, Make: Crompton or equivalent to phillips/Bajaj

Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.

m/s nemichand contractor

M/s Ajay kumar Garge

M/s SUNIL ENTERPRISES

M/S KAUTILYA GARG

THE SHIVAM ENTERPRISES