PROVN OF TOILET BLOCK NEAR BLDG NO TR-13 AND RAIN AND SUN PROTECTION SHED AT KALAM BLOCK AND ADDN/ ALTN TO 777 AND KLP GATE OF MCTE UNDER GE (MCTE) MHOW

Amount

B/R WORK

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out hard/ dense soil.complete all as specified and directed.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil. complete all as specified and directed.

M & L for Treating the top surface of the filled earth @ 5.00 ltr of emulsion per Sqm of surface area with ATT. complete all as specified and directed.

M & L for Treating the soil along with internal periphery of room at the rate of 2.25 litre of emulsion per metre of surface area with ATT. complete all as specified and directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.

M & L for Cement concrete in foundations, filling and mass concrete 1:4:8 type D2 using for column footing, plinth beams complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20mm graded aggregate) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under remaed piles and mass concrete complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20mm graded aggregate) for columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20mm graded aggregate) for beams, cantilevers, bressummers, structs complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, alndings, blaconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L RCC (nominal mix) Type A-1 1:1.5:3 (20 mmgraded aggregate ) for chajjas supported on walls, beams and column in floors, roofs , alndings, blaconies , canopies , deck slabs ,and in shelves and the like complete all as specified and directed

M&L for mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90mm dia or securing with chip). complete all as specified and directed

All as per Sl item No.14 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders. complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter with rough finished sufraces of concrete complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions with fair finished surfaces square complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves includings supports, overhangs, etc also splays between floors and beams etc. complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges all as complete all as specified and directed.

Approved earth filling with approved soil/ morooum brought from out side MD land, filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering etc complete all as specified and directed.

M&L for broken stone or bounders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/ true surface complete all as specified and directed.

M & L for 100mm thick PCC type D-2 1:4:8 (40mm graded stone aggt) in sub base of floor. complete all as specified and directed.

M & L for 50mm thick PCC type B-2 1:2:4 (20mm graded stone aggt) in top layer of floor to be finished even and smooth with using extra cement. complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 450 x 300 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Returning fillng in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed as in soils.

Removing excavated material exc 1.5 km but n exc 5 km away from MoD Land from the starting point. complete all as specified and directed.

M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate in plinth protection incl making surface smooth without using extra cement, joints should be filled with bitumen etc, ccomplete all as specified and directed.

M&L for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed

M&L for Rendering 5mm thick on fair faces of concrete/ brick interior ceiling surfaces in cement mortar 1:4 as per manufacturer's instruction, finished fair and even without using extra cement, complete all as specified and directed.

M&L for Rendering 20mm thick in cement mortar 1:4 on the roof slab while the concrete is green, mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

Supply only liquid water proofing compound. complete all as specified and directed.

M&L for preparation of new surfaces and applying two coat of oil bound distemper with roller on new treated surfaces of wall incl primer etc complete all as specified and directed.

M & L for preparing newly suraces and applying three coat of white wash on ceiling complete all as specified and directed.

M & L for preparation of new wall surfaces and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drawing.

S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section. complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type. complete all as specified and directed.

S&F Stainless Steel 100mm size, butt hinges, complete all as specified.

S & Fixed in Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified.

S&F in vitreous china squatting pan (orissa pattern) size 630mm x 450mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) including S or P trap, Fixed, complete all as specified

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified

S&F 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F Urinal spreader of brass Chromium plated for fixing with 15mm dia pipe.

S&F for Towel Ring of brass chromium plated fixed with and including SS screws and wooden/ plastic cleats Complete all as specified and directed.

S&F SS Towel Rail 600mm long fixed with and including SS screws and wooden/ plastic cleats. (Minimum weight 190gms)

S&F SS Grating doom 100mm dia complete all as specified.

S&F Liquid soap container/ dispenser fixed with and including SS screws and wooden/ plastic cleats.

S & F Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S&F 15mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S&F 15mm bore bib tap two way cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S & F Stainless Steel Soap Dish fixed to wall all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduitwiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed

S&F, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 ,all as specifed and directed.

Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, table top for wash basin , urinal partition, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, all as specifed and directed.

M& L for rounding/ chamferring to edges of stone slabss one edge, such as in steps, cooking plateform and other similar situations completed all as specifed and directed.

S&F powder coated aluminium sliding window three track with two glass shutters using 5mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperature 1.61mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc all as specifed and directed.

S&F powder coated aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess incl all fittings, accessories etc all as specifed and directed.

S&F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specified & directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, all as specifed and directed.

S&F HDPE 150mm bore double wall corrugated sewage pipe SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction Complete all as specifed and directed.

M & L for cement concrete bed in PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and directed, for the following sizes:- Note : Thickness of bed below the barrel of pipe 10cm for pipe 100mm and 150mm dia, 15cm for 200mm dia & over, all as specifed and directed.

M&L for PCC 100mm thick type C2 (1:3:6) using 40mm graded stone aggregate) as in sub base of man holes etc complete all as specified and as directed.

M & L for PCC 1: 2 :4 type B-1 (using 12.5mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miterd/ stopped ends etc complete all as specified and directed

M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items complete all as specified and directed including testing for water tightness & 10 years gaurantee:- (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting. (ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3 Kg/ sqm composed of 100 micron (+10%) high density polyethylene sheet (HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction etc. (v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm over APP membrane. complete all as specified and directed.

M&L for applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed.

S & F under counter ivory wash basin, vitreous china size 560 x 410 x 180mm including cutting for and pinning in ends of brackets or erecting stand but incl wastecoupling and brackets, fixing of supply and waste pipe, Rag Bolt Assy 3/8" complete all as specified and directed.

S&F for chromium plated brass Central hole basinmixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange complete all as specified and diretced.

S & F two way Angle cock with Flange 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure completed all as specifed and directed.

S&F Health Faucet ABS with 1.00 m Long Flexible Tube & ABS Wall Hook. complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps complete all as specified and directed.

All as per item No.82 here -in-before but laid in trenches or in floors complete all as specified and directed

S&F 75mm bore PVC (SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps complete all as specified and directed.

All as per item No.84 here -in-before but laid in trenches or in floors complete all as specified and directed.

S&F in PVC (SWR) bends 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed.

S&F in repair for 75mm dia PVC (SWR) floor trap with grating including jointing with solvant cement including PCC 1:2:4 and making good the existing floor complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S & F factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/ cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. complete all as specified and directed.

S&F 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed.

S & F Continuous (piano) hinges, 30mm Width of flaps (when open) in mm brass, bright finish or electrogalvanised Continuous (piano) hinges, bright finish or electrogalvanised, complete all as specified and directed.

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.

S & F Aluminum handle cast type anodized size 75mm long, complete all as specified and directed.

S & F Machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment etc over and incl 25mm thick uniformly levelled surface of stone dust cushioning. complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in coping, benching to hold to lower portion of chain link fencing, coping, apex stone, bed plate, kerbs including weathering, slightly rounded or chamferred angles and throating and incl. necessary form work etc complete all as specified and directed.

M&L for rolled section/ hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting, connecting to gusset plate etc complete all as specified and directed.

S&F 0.50mm thick galvalume sheet profile pattern precoated coloured having tensile strength 550 Mpa as in roof covering, fixed with self driving screws complete all as specified and directed.

S&F for poly carbonate sheet (standing seam panels) plain 10mm thick as in roof covering/ cladding to wall, fixed with all acessories complete and including all as specified and directed by Engineer-in-Charge (any height of bldg)

S&F of structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

S&F of structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal/ square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 16 to 20mm. complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.

Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced). complete all as specified and directed.

Demolition of RCC of any description & in any position not otherwise specifically provided for (reinforced). complete all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed.

Excavation in trenches, n. exc 1.5 m wide and n.exc 1.5 m deep in soft/loose soil and getting out complete all as specified.

Excavation in trenches, n exc 1.5 m wide and exc 1.5 m but nexc 3 m deep in soft/ loose soil and getting out complete all as specified.

Dismantling structural steel work including doors, gates, etc but excluding framed truss complete all as specified.

S&F for mild steel framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cattle traps & similar work conforming to Fe 290-0 Gde E-165. complete all as specified.

M&L for Vitrified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40mm graded stone aggregate) mass concrete as in foundation filling and mass concrete.

S & F for LED post top lantern 50 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50mm dia including removal of old unserviceable one complete all as specified and directed.

Supply & Laying XLPE insulated, armoured, electric cable of size 10 sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles / walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with driver and lamp complete all as specified and directed.

M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 2.5 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of FRLSH PVC insulated unsheathed 1.5 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 2.50sqmm cable,one run of 1.50 sqmm cable and one run of PVC conduit will be measured as

Supply and fix in repairs double door SPN DBs 4/6 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral

Supply and fix MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed.

Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed.

M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.

M&L for concealed point wiring with PVC insulated and unsheathed, single core FRLSH cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into and including PVC rigid conduit not less than 20mm dia, medium grade, ISI marked with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLSH cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2mm thick sheet covered with 2.6mm thick white hylam sheet cover of suitable size for mounting switches/ sockets/ fan regulators including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following:-

(a) One light/ fan point controlled by one switch, complete all as specified and directed.

(d) One socket outlet 2/3 pin 5 Amp, multipurpose on SAME BOARD with other switches, complete all as specified and directed.

(c) One switch/ socket outlet point 2/3 pin 5 Amp multipurpose on independent board, complete all as specified and directed.

All as per Item No.128 above, but with FRLSH cable 2.5 sqmm stranded copper conductor for switch/ socket outlet 5 Pin, 15 Amps multipurpose controlled with 2.5 sqmm copper conductor FRLSH cable as continuous earth wire of green colour on independent board. complete all as specified and directed.

S&F Switch piano flush type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed.

S&F Switch piano flush type 15 Amps, 230V AC single pole one way complete all as specified and directed.

S&F Socket out let multipurpose suitable for 2/3 pin 5 Amp flush type

S&F Socket out let 2 IN 1, multipurpose suitable for 3 pin 5/15 Amp flush type.

S&F angle/ batton type holder insulated body in white colour

S&F ceiling rose, 3 phase, polycorbonate isolated body for surface type, three terminals.

S&F LED lamp of 7 W (B-22 Base) 6500K complete all as directed.

S&F 20W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. Make : Havells Cat part No LHEXAWP7IN1W020 or equivalent make of Orient electric/ bajaj as approved by GE.

S&F of exhaust fan, steel body AC single phase 230 volt of size 380mm sweep complete with blade, frame and louvers all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces. complete all as specified and directed.

S&F plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces. complete all as specified and directed.

S&F double door SPN DBs 6/8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and directed.

M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of FRLSH PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall complete all as specified and directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of PVC conduit will be measured as

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store complete all as specified and directed.

S&F LED street light fitting 30/35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket, GI pipe of 40mm 1.5 mtr long and bending in 45 degree with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

Supply and laying of Galvanised Iron water pipe, medium grade, of size 25mm bore laid in trenches/ on wall etc complete with all GI accessories all as specified and directed.

M & L for drilling and tapping CI/DI/GI water mains (in position) for branch connection of the internal dia 25mm and connecting tee of suitable size complete all as specified and directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of size 25mm bore complete all as specified and directed.

BHATIA ASSOCIATES (BID ID -3151966)

M/s Shree Ganesh Traders (BID ID -3142448)