COMPREHENSIVE MAINTENANCE SERVICES AND REPAIRS TO BLDGS AND CLEANING AND REPAIR OF SEWAGE LINES, MANHOLES, SEPTIC TANK AND SOAKAGE WELLS IN ZONE A AT SUNJUWAN UNDER GE JAMMU

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engr-in-Charge.

Description all as per Ser item no 1.00 here-in-before but exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each complete and removing from site complete all as specified and as directed by Engr-in-Charge.

Taking down shutters and refixing in same opening after resecuring or easing and adjusting, also refixing builders hardware as required including renewal of unserviceable screws etc of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed by Engr-in-Charge.

M&L Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC 1:3:6 type C-0 in back filling of chowkats and tarring back of chowkats and holdfasts complete all as specified and directed by Engr-in-Charge.

M&L Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC 1:3:6 type C-0 in back filling of chowkats and tarring back of chowkats and holdfasts complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.

S&F 30 mm thick PVC wood grain printed factory made panel door shutter (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded wood grain printed PVC channel and 5 mm thick X 15 mm wide PVC Sheet beading used inside style and rails and decorative PVC beading of 10 x 10 mm used instead of exposed portion of PVC sheet beading as in toilet / kitchen cabinate Shutters complete all as specified and as directed.

S&F mild steel butt hinges medium weight 75 mm long complete all as specified and as directed by Engr-in-Charge.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both faces are covered with decorative face veener with lipping/frame to match complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made Ist class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats, complete all as specified and directed by Engr-in-Charge.

S&F mild steel butt hinges medium weight 100 mm long complete all as specified and directed by Engr-in-Charge.

S&F box type steel windows / Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3. Note:- The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface (ii) 4 no's MS steel lugs made of 20X5 mm Iron flat 200 mm long (iii)10 mm Sq Bar grill/guard bar design as per drawing (iv) PCC block for embedding lugs complete all as specified and directed by Engr-in-Charge.

M&L cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in pressed steel chowkats bed block for holdfast and the like complete all as specified and directed by Engr-in-Charge.

S&F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks, Cupboard frame etc (including cutting holes in brick masonry walls and fixed with PCC 1:11/2:3) and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

S&F in repairs 18/19 mm thick Prelaminated Particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws / nails to timber / steel frame work as in shelves, cup board shutters, book case, writing table stand, shelves etc including fixing of plain fillets square or rectangular of 2nd class hard wood not exceeding 3 sq.cm in leaping to shutters / shelves complete fixed all as specified and as directed.

S&F continuous piano hanges, mild steel, bright finish or electrogalvanised, width of flap 30mm (when open) fixed with welding complete all as specified and as directed by Engr-in-Charge.

S&F Hasp and staple size 100 mm, alumium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handle cast type, anodised size 150mm long, 'D' type complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and directed by Engr-in-Charge.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

S&F in repairs Helical door spring 150mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass of any thickness, size, quality or description from the wooden / steel frames glazing with putty or fixed with wooden beads complete all as specified and as directed.

S&F 3mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 storey building complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick frosted glass sheet quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 storey building complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint on old steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new surface all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10cm girth complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and directed by Engr-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed by Engr-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm complete all as specified and directed by Engr-in-Charge.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

M&L for Opening of air lock / blockage in GI pipe line from outlet of water tank to all internal GI pipes / fittings to smooth flow of water from bib taps / shower / WHB pillar tap / stop valves complete by air pressure / water gravity pressure etc complete all as specified and directed.

M&L for replacing 15 mm GI fittings of medium grade ISI marked like butt Elbow, socket, nipple, union socket, tee etc complete all as specified and as directed at site.

M&L for replacing 20 mm GI fittings of medium grade ISI marked like butt Elbow, socket, nipple, union socket, tee etc complete all as specified and as directed at site.

Complete removal of vegetations, roots and shrubs from wall nd making good the wll with cement, brick work and plastering including all scaffolding upto 4 storey building complete all as specified and as directed by Engr-in-Charge.

M&L for repairs to steel windows / doors by using welding machine where necessary thickness of each welding spot exceeding 6mm but not exceeding 9mm complete all as specified and as directed at site.

M&L for disconnecting existing tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete, all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for disconnecting existing tanks of capacity exceeding 500 ltrs but not exceeding 1000 ltrs, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete, all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC low level flushing cistern valve less, syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia, PVC connection (15 X 450 mm) long complete all as specified and as directed.

Material and Labour repairing of PVC low level / high level cistern by changing its internal fitting including PVC flush pipe etc complete all as specified and as directed at site.

S&F in repair Vitreous china squatting pan 'Orissa' pattern size 580x440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, etc. complete making good to floor as existing complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and directed by Engr-in-Charge.

S&F in repairs kitchen plate rack of stainless steel of size 900 x 800 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed.

S&F in repairs Vitreous china wash hand basin white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-in-charge.

S&F in repairs Pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass CP Mixer of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. Make: - Jaquar, Cera, Kohler

Dismantling PVC water tank of capacity upto 1000 ltrs and removing from site complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gram) complete all as specified in SSR Part I.

S&F rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gram) complete all as specified in SSR Part I.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms) of 15 mm bore complete all as specified and as directed.

S&F in repairs 20 mm dia Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gram), screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Repairing of existing float valve by replacing its rod of brass or plastic float of any description complete all as specified and as directed at site.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area all as specified and directed by Engr-in-Charge. Note: Plaster work may be in patches upto triple storey.

M&L rendering 10 mm thick in CM 1:6 on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and directed by Engr-in-Charge.

M&L rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in CM 1:4 in two layers of 10 mm thick and 5 mm thick with WPC on fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and directed by Engr-in-Charge. (Including all necessary scaffolding lifiting arrangement for external surfaces).

M&L for two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of cement based paint including preparation of new plastered surface complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment and applying two coat of Apex paint on old surface of chajjas including preparation complete all as specified and as directed.

Complete removal of existing treatment of old surface of wall (plastered or unplastered) and applying one coat of cement base paint complete all as specified and as directed.

M&L for two coats of oil bound distemper of wall to old plastered surfaces including preparation of surfaces complete all as specified and directed.

M&L applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.

Dismantling floors, hearth or wall tilling including cement mortor bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L glazed ceramic coloured tiles 300 x 450 x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in CM 1:4 complete all as specified and directed.

M&L Vitrified tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L Vitrified tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10 mm thick screed in CM 1:4 complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge.

M&L granite 20mm thick (Pure black) (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cm 1:4 edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed.

S&F in repairs chromium plated bib tap 15mm size with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair bib tap of bore 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gm) complete all as specified and as directed.

S&F in repair cabinet mirror plastic body for toilet of size 350 X 600mm with 4mm thick looking mirror complete all as specified and as directed.

S&F in repair CP healt faucet with 1 mtr long CP flexible pipe complete all as specified and as directed. Make: - Cera, Jaquar, Kohler

S&F in repair Plain aluminium sheeting 0.71mm thick, in crumple joint covering, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F in repair angle / stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated shower rose 125mm size any colour with or without swivel joints, arm 15mm size, 195mm long including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and directed by Engr-in-Charge.

M&L for 6mm thick asbestos cement, corrugated or semicorrugated sheets fixed with L-type or J-type or cranked hook bolts as in roof, walls etc complete all as specified and directed by Engr-in-Charge.

M&L for Asbestos cement two piece adjustable plain ridge 6mm thickness to suit corrugated or semicorrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

M&L pre-painted galavlume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L pre-painted galavlume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling 40 sq cm and over in section framed work of any description complete all as specified and directed by Engr-in-Charge.

S&F for structural steel works of Fe 410W (Gde E 250) quality 'A', as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including painted one shop coat of zinc chromate / red oxide primer paint (including preparation of surface) before fabrication complete all as specified and directed by Engr-in-Charge.

Dismantling boarding any description fixed in any position with nail complete all as specified and directed by Engr-in-Charge.

S&F for frame work for ceiling with specification as under mentioned:- (i) GI section frame work (Powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X 24mm flange 0.33mm thick. Wall angle shall be screwed / fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm C/C , then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm C/C to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm C/C in both directions and all suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engr-in-Charge.

S&F for 4mm thick of size 605X605 mm, white pre-premiered, self embossed, reinforced Designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 fixed / laid / inserted to GI framework at ceiling with screws complete all as specified and directed.

S&F in repair PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand (all by weight) complete all as specified and directed by Engr-in-Charge.

M&L for double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and directed by Engr-in-Charge.

Repair to Aluminium door including adjusting, necessary bedding, clip, rubber beader, repair to floor door closer complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 No in each door hinges, anodised aluminium snap beading screws etc complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including anodised aluminium safety grill and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed by Engr-in-Charge.

S&F 5.50mm thick sheet glass fixing for aluminium doors and windows including 25 micron reflective type sun control film complete all as specified and directed by Engr-in-Charge.

S&F in repairs Aluminium (extruded section) body door closer hydraulically regulated designation No. 2, universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 and 60Kg complete all as specified and directed by Engr-in-Charge.

S&F in repairs waste coupling of PTMT (half or full threaded) of bore dia 32mm discharge pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair grating doom 100mm dia without hole chromium plated complete all as specified and directed by Engr-in-Charge.

S&F in repair grating doom 100mm dia with hole, chromium plated complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin / sink complete all as specified and directed by Engr-in-Charge.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 150mm complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC tank cover for water storage tank for 500 ltr capacity including locking arrangement complete all as specified and directed by Engr-in-Charge.

S&F in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) bends of bore 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends of bore 75 mm dia complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

Cleaning of sewage line, horizontal or vertical of dia 75 mm to 150mm by rodding, well flushing using adequate / sufficient water and making it clear for smooth flow sewage from WC / NT / SNT / FT (at any floor to 1st manhole outside building) including desludging the 1st manhole and cleaning to entire satisfaction of Engineer-in-Charge and removing the sludge to a distance outside of MOD land from site; resetting the manhole cover and making the area neat and clean complete all as specified and directed. Note: - (i) For the purpose of payment, cleaning of sewage lines and upto including 1st manhole shall be measured as one job. (ii) The contractor will employ two safaiwalas alongwith necessary T&P on all working days for the period of contract for attending the sewage related complaints for buildings where machine cannot be reached. The compliants will be collected by the contractor or his accredited representative on all working days from B/R complaint cell. Complaints will be got signed by the authorised users representatives and will be returned to B/R complaint cell after completion of the complaint. No complaint shall be kept pending or unattended for more than 24 hours.

Cleaning of existing drain pipes upto and including 200mm dia at any depth as required at site from manhole and well finishing after cleaning including getting out sludge if any and liquid materials from connecting manholes. The cleaning shall be carried out with mechanised operation by means of diesel / electric operated vehicle mounted hydraulic operated high pressure suction - cum - jetting machines fitted with pump of required requisite capacity and the sludge sucked out with Super Succer Machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. The sludge deposited in sewage line shall be fully cleaned and disposed off the same outide the MOD land at any distance and without any additional cost to the Govt. The job shall be carried out with safety precaution equipment and with strict supervision complete all as specified and as directed by Engineer-in-Charge.

Cleaning of septic tanks of capacity upto and including 25 users by removing sludge and sludge water by pumping or manually or by any means and the sludge/sludge water is to be disposed off in covered containers to a distance exceeding 2 Kms outside the peripherry of defence land including taking off and refixing manhole covers complete all as specified and as directed.

Cleaning of septic tanks of capacity exceeding 25 users and not exceeding 50 users capacity by removing sludge and sludge water by pumping or manually or by any means and the sludge/sludge water is to be disposed off in covered containers to a distance exceeding 2 Kms outside the peripherry of defence land including taking off and refixing manhole covers complete all as specified and as directed.

Cleaning of septic tanks of capacity exceeing 50 users and not exceeding 100 users capacity by removing sludge and sludge water by pumping or manually or by any means and the sludge/sludge water is to be disposed off in covered containers to a distance exceeding 2 Kms outside the peripherry of defence land including taking off and refixing manhole covers complete all as specified and as directed.

Cleaning of septic tanks of capacity exceeding 100 users and not exceeding 200 users capacity by removing sludge and sludge water by pumping or manually or by any means and the sludge/sludge water is to be disposed off in covered containers to a distance exceeding 2 Kms outside the peripherry of defence land including taking off and refixing manhole covers complete all as specified and as directed.

Cleaning of septic tanks of capacity exceeding 200 users and not exceeding 300 users capacity by removing sludge and sludge water by pumping or manually or by any means and the sludge/sludge water is to be disposed off in covered containers to a distance exceeding 2 Kms outside the peripherry of defence land including taking off and refixing manhole covers complete all as specified and as directed.

Cleaning of septic tanks of capacity exceeding 300 users and not exceeding 500 users capacity by removing sludge and sludge water by pumping or manually or by any means and the sludge/sludge water is to be disposed off in covered containers to a distance exceeding 2 Kms outside the peripherry of defence land including taking off and refixing manhole covers complete all as specified and as directed.

Notes: - For Serial No 117.00 to 123.00 (i) The sewage line is required to be cleaned by using water jetting machine as directed by Engineer-in-Charge. The unit rate quoted by the contractor shall deem to be included of this provision and no extra claim on this account shall be entertained by the department. Jetting machine will be compulsory minimum three times a week otherwise one day recovery of Rs. 10,000/- will be deducted from the payment due to the Contractor. (ii) Contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction / jetting machine. (iii) Manual cleaning operation / Scavenging is prohibited. (iv) The unit rate quoted by the contractor shall interalia deemed into the cost of providing skilled driver and operator and supervising engineer including provn of water for jetting and removal of sludge / silt / liquid / mud and sand (in foul position) etc complete all as specified. (v) Contractor shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No / Vehicle No etc for their record and prior approval. (vi) The T&P as and when brought by the contractor based on site requirement, the concerned site executive shall take a photograph of machine along with the supervising staff i.e. JE's and contractor's representatives etc and same shall be kept in record with date. (vii) Pucca bound register shall be maintained showing the machine no / vehicle no and their deployment at site mentioning time and date duly signed by concerned JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the contractor.

Excavating in trenches depth not exceeding 1.5 m wide and not exceeding 1.5m in depth, for foundation etc. and getting out in any type of soil complete all as specified and as directed.

Excavating in trenches depth exceeding 1.5 m and not exceeding 3 m, for foundation etc. and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed stoneware, AC or Reinforced concrete) of 150 mm dia, jointed in cement mortar and taking out from trenches and removing debris including concretre bed and haunching from the side outside cantt area complete all as specified and as directed.

M&L concrete bed to drain pipes of bore 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and as directed.

M&L Reinforced cement 150mm dia pipes, class NP-2 with one collar per length of pipe laid in trenches complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed stoneware, AC or Reinforced concrete) of 200 mm dia, jointed in cement mortar and taking out from trenches and removing debris including concrete bed and haunching from the side outside cantt area complete all as specified and as directed.

M&L Plain cement Concrete (1:3:6) type C-2 bed to 200 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

M&L Reinforced concrete 200mm dia pipes, class NP-2 with one collar per length of pipe laid in trenches complete all as specified and directed.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Brickwork with sub class "B" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Description same as per Ser item No 136.00 here-in-before but except bricks.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and as directed.

M & L Separating, scrapping and cleaning of reinforcement complete all as specified and as directed. Note: - Demolition of concrete shall be measured separately.

M&L providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and as directed.

S&F mild steel TMT bars 6 to 8mm dia as in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness below or above ground level complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching, coping etc including necessary form work complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channel, drain etc complete all as specified and as directed.

S&F in repair Vitreous china bowl urinal flat back, size of 465 X 355 X 265mm white (minimum), with grating and union for discharge pipe, fixed in repairs including connections to flushing pipe and outgoing pipes complete all as specified and as directed.

S&F in repair plastic water closet seat cover, closed pattern (approved colour) with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single, single 'T' equal or unequal with solvent cement joints, fixed to wall / floor / trenches for following bore of pipes: -

110 mm dia bore

75 mm dia bore

S&F in repairs PVC (SWR) couplers with solvent cement joint, fixed to wall / floor / trenches for following bore of pipes: -

110 mm dia bore

75 mm dia bore

S&F in repairs PVC (SWR) reducers with solvent cement joint, fixed to wall / floor / trenches for following bore of pipes: -

110 mm dia bore

S&F in repair cover of CI oval access door with bolts and rubber gasket to make it water tight for 100 mm bore CI bends complete all as specified and as directed by Engr-in-Charge.

S&F in repair cover of CI oval access door with bolts and rubber gasket to make it water tight for 75 mm bore CI bends complete all as specified and as directed by Engr-in-Charge.

S&F in repair UPVC branch piece single (single Y) with access door for 110 mm bore complete all as specified and as directed.

S&F in repair UPVC branch piece single (single Y) with access door for 75 mm bore complete all as specified and as directed.

Dismantling of CI / PVC pipe 75 / 100 mm bore complete all as specified and as directed by Engr-in-Charge.

M&L of CI sand cast pipe 75mm dia bore fixed to wall / laid in trenches etc jointed with cement joints complete all as specified and as directed by Engr-in-Charge.

M&L of CI sand cast pipe 100mm dia bore fixed to wall / laid in trenches etc jointed with cement joints complete all as specified and as directed by Engr-in-Charge.

M/S LANGER CONSTRUCTION COMPANY

M/S TRIKUTA BUILDERS

M/S CHOUDHARY BUILDERS

Bidder Name

M/S TRIKUTA BUILDERS

ASHFAQ AHMED MANHAS

M/S CHOUDHARY BUILDERS

M/S LANGER CONSTRUCTION COMPANY