REPAIRS TO JOINERIES, PLUMBING, SANITARY FITTING, BRICK WORK, PLASTERING, TILING AND OTHER MISC WORKS AT TECHNICAL AREA OF AF STATION KALAIKUNDA UNDER GE (AF) KALAIKUNDA

Amount

Disconnecting existing tanks,setting aside (or lowering if required) for repairs, cleaning and removing all scale dirt, etc from tanks and from mouths of circulating pipes exc.250 ltr but n.exc 500 ltr., and hoisting if required reconnecting and and re-fixing in position.

Disconnecting existing tanks,setting aside (or lowering if required) for repairs, cleaning and removing all scale dirt, etc from tanks and from mouths of circulating pipes exc.500 ltr but n.exc 1000 ltr., and hoisting if required reconnecting and and re-fixing in position.

S&F in repair rotational moulded polyethylene multi layer water tanks (vertical cylindrical with closed top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one complete all as specified and directed.

S&F in repair rotational moulded polyethylene multi layer water tanks (vertical cylindrical with closed top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe

S&F in repair of PVC ball valve 20mm dia high pressure of PTMT with Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc

M & L 10mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement as specified.

M&L rendering 15 mm thick on fair faces of brick or concrete surfaces with cement mortar 1:4 mixed with liquid water proofing compound @ 0.25% by weight of cement or as per manufacturer instruction and finishing the surface even & fair without using extra cement complete all as specified and as directed. Note:- Liquid water proofing comound shall be measured & paid separately

M&L applying two coat of 100% acrylic exterior emulsion paint in camouflage pattern (Three colour as approve by GE) over and including a coat of primer to new plastered of wall (including chajja, facia & ceiling surface) including preparation of surface of any height including all necessary scaffolding complete all as specified and as directed.

M&L preparation of newly plastered/putty wall surfaces and applying two coats of acrylic distemper 1st quality over and including a coat of wall care putty (1.5 mm thick) complete all as specified and as directed.

Supply only Liquid Waterproofing Compound

Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame)

Taking down chowkat or frames nexc 1.5 sqm each with shutter (without taking off shutters from the frame)

M&L taking down of aluminium door shutter area exc 1.0 sqm but n exc 2.0 sqm and refixing the shutter in same opening after necessary repair/adjustment/easing or adjusting hinges with screws/pivot/door spring/door clouser complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium window & ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F Sheet glass 4.80 mm thick with solar control film 25 micron reflective type sticked to glass pane as per manufactures instruction, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane, film colour as per requirement of site.

S&F Sheet glass 4.80 mm thick with solar control film 25 micron reflective type sticked to glass pane as per manufactures instruction, ordinary quality & glazing with oil putty in square but exc 0.5 sq.m in each pane, film colour as per requirement of site.

S&F in repair 4mm thick figured glass, pin head type and glazing with oil putty in squared n.exc 0.50 Sq.m in each pane.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing with Rough cast wired glass,6.4mm thick, exc. 0.75 Sqm but n.exc 1 Sq.m in each pane and glazing with oil putty in square, complete all as specified and as directed.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, in opening as per specification & drawing

S&F Factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with 2,4 or 6 raised panel design with 2 mm thick 3D wood wood grain moulded PVC sheet polyurathane painted on the front face & 2 mm thick plain colour PVC sheet on back face supply & fixing on frame, as per specification & drawing.

S&F stainless steel Butt hinges 100 mm size, medium weight, .

S&F extruded Aluminium alloy handles 150 mm size, cast type, anodised

S&F Aluminium, anodised, barrel tower bolts 150 mm long of extruded section.

S&F Sheet glass 3.0 mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones

S&F Sheet glass 3.0 mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

S&F brass 4-levers mortice lock, vertical type , size 100 mm complete all as spcified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

S&F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.

Resecuring or easing & adjusting, with taking down Shutters of any description n exc 1 sq.m each and refixing in same opening

Resecuring or easing & adjusting, with taking down Shutters of any description exc 1 sq.m but n exc 2 sqm each and refixing in same opening

S&F in repair stainless steel Butt hinges 100mm size, medium weight, .

S&F in repair extruded Aluminium alloy handles 150mm size, cast type, anodised

S&F in repair Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, & steel peg stay, complete with glazing bars, dovetailed or welded

S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain let in & fixed independently in wooden frames L or T section support for shelves etc., & similar articles conforming to Fe 290-0 Gde E-165

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O

S&F Mild steel, plain black sheet 1.25mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughS&Funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivetS&Fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets,etc. as required

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm including one shop coat of redoxide primer

M&L providing cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate)for filling of steel door frame complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sectionS&Fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section.

S&F extruded Aluminium alloy handles 150mm size, cast type, anodised

M&L applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer

Dismantling/taking down u/s parts of steel rolling shutters (self closing types shutters i.e push pull with gear operating type mechanically or motor operated) area n.exc 20 sqm each and for repairing and overhauling of rolling shutters and greasing/oiling of member of rolling shutters and finally painting with synthetic enamel paint (two coats) after preparation of steel surface complete all as specified and as directed. Note:- i) Refixing/welding of rolling shutters duly repaired/overhauled/welded/painted shall be deemed included in quoted rates.ii) Fixing of new parts of rolling shutter shall be deemed included in quoted rates. iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supply only under the relevant item iv) Make/size/specification of new parts of rolling shutter as per existing specification of rolling shutters. v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost.

M&L preparation of new or previously untreated steel or iron surfaces of any description over 10cm in girth or width not otherwise described and applying two coats of synthetic enamel paint.

Supply only Safety lever locks mild steel with 4 levers for rolling shutters

Supply only Ball bearing for rolling shutters

Supply only MS sheet 1.25 mm thick for hood cover complete all as specified.

Supply only curtain i.e interlocking lath section formed from cold rolled steel strip 1.25 mm thick complete all as specified.

Supply only helical wire spring or flat spiral springs complete all as specified.

Supply only MS 40 mm bore "heavy weight" for suspension shaft complete all as specified.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L screed or bedding layer 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed.

M&L Rendering 10mm thick in cement mortar 1:3 finished even and fair on vertical surfaces on walls for fixing of dado / skirting tiles

M&L Light Shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Light Shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed.

Taking up or down steel tubing and connections, 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore complete all as specified and as directed.

S&F tubes 15mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed.

S&F tubes 20mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed.

S&F in repairs coloured vitreous China wash basin, white, flat back, size 550 x 400mm including pedestal, waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or erecting stand etc. complete all as specified and as directed.

S&F in repairs 15mm bore fancy type CP Pillar taps fancy type screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white/coloured (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair Plastic water closet seat,(white colour), closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed.

S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern to squatt pattern all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white/coloured (excluding flushing cistern, flush pipe and waste pipe) including providing fixing plugs bedding urinal against wall etc all as specified and directed .

S&F grating doom 125 mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position all as specified and as directed

S&F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalve float and handle including brackets complete all a specified and as directed.

S&F in repairs CP fancy type bip taps 15mm screw down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs fancy type CP stop cock/angle cock (concealed type)15mm screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms)

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs high density polyethylene pipe (HDPE), 32 mm dia for WHB or sink complete all as specified and as directed.

S&F in repair Towel rail fancy type cromium plated 20 mm dia decorative fancy D type 60 cm long all as specified fixed .

S&F in repair Waste coupling 40mm bore of PTMT (half or full threaded) min. weight 40mm-60 gms) .

S&F in repair Waste coupling 32mm bore of PTMT (half or full threaded) suitable for urinals (min. weight 32mm-45gms)

Taking down eaves, gutter and rain water pipe any size or pattern including all fittings complete all as specified and as directed.

S&F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bends any radius 150mm dia

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm, complete all as specifed and as directed. Fixed with 16 guage wire complete all as specified and as directed

S&F 4 mm thick non asbestos fibre cement building boards (designer type) fixed or laid/inserted to timber/GI/Aluminium frame work, complete all as specifed and as directed.

S&F galvanised mild steel wire cloth 0.63 nominal dia of wires and average width of aprarture 1.40 mm and fixed with tinned tacks galvanised wire staples ,complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specially privided for (unreinforced) complete all as specified and as directed.

M&L 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate), as in plinth protection etc , finished even and smooth w/o using extra cement complete.

M&L Forming Construction (Dummy joints 50mm deep x 10mm wide, filled with sealing compound of Grade A

M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) finished fair and even without using extra cement as in sub-floors, sub-bases, floors, pavings etc

M&L 4mm thick ACP board (Aluminium composite panel), exterior grade, (approved colour) fixed with aluminium tapperd clip to aluminium frame work all as specified and as directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

SHARMA ENTERPRISES (BID ID -3325679)

SUMAN CONSTRUCTION (BID ID -3340492)