STP Irrigation Project, Amargarh

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Tender No.: DSWC/PAT/2026-27/09

Name of the Firm/ Bidder

Address of Firm/ Bidder

Mobile No of Firm/ Bidder Email ID of Firm/ Bidder

Name of work: PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 200 MM, 400 MM, PE-80, 4 Kg/cm2 WORKING PRESSURE AS PER 4984-1995 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT (2.0 MLD), BHADSON, DISTRICT PATIALA FOR SUPPLY OF TREATED WATER FOR IRRIGATION

Total Estimated Amount of Works Rs.

Quoted by Contractor {- or + to estimated amount, in figure upto 2 dcimal point only} Quote (-/+)

Note: Please quote only figure (upto 2 decimal points) in above blue colour box in minus or plus. Do not put %age sign after this figure. Please check Quoted Rate in Next cell.

Note: Please refer to DNIT (attached sheets) for item wise rate and details.

Note: Please refer to DNIT (attached sheets) for item wise rate and details.

Item of Work Total Amount (INR) In Figure

Providing, Laying, Jointing of HDPE 160 mm, and 400 mm dia, PE-80, 4 Kg/cm2 and Excavation of Trenches with back filling of Pipeline system etc. complete in all respects Forty five lakhs and forty two thousand and four hundred Fifty four only 4542454

Civil Work of Pump Room Five lakh sixty five thousand nine hundred thirty nine only 565939

Civil Works for Sump Well for Irrigation with treated water (Lump Sum) Eight lakh only 800000

Providing and fixing of Pumping System complete Ten lakh seventy seven thousand and two hundred ten only 1077210

Electric Fittings for pump house and pumps Three lakh twenty five thousand nine hundred forty five only 325945

Digital Water Meter (ULTRASONIC) One Lakh Rupees Only 100000

Autocut System Twenty Five Thousand Rupees Only 25000

Sign Board Five Thousand Rupees Only 5000

Figure in words: Rupees Seventy four lakhs forty one thousand five hundred forty eight only

Only one of the options is to be filled. More than one option shall be rejected.

Rate filled in any form shall be considered only in %age

Rate shall be filled both in figures and in words, otherwise tender shall be rejected

Rate filled at any other place in the document shall not be considered.

No condition shall be accepted.

The provision for the Sump Well has been made on a lump-sum basis. The detailed BOQ and approved item-wise rates shall be issued as per the vetted and approved estimate.

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. AMARGARH (2 MLD)

ABSTRACT SHEET FOR PIPELINE SYSTEM

S.No. Description of items Unit Qty Rate Amount (INR)

1 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards,

Earth work upto 1.5 m. Depth for All classes of soil except rocky Cum 3058.6 93.78 286835.5

2 Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

H.D.P.E 160 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 4355 744.1

0.0 Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

H.D.P.E 400 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 60 4464.5

3 Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.

For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15(E)(F) Mtr 4298 14.88

4 Supply & Installation of Alfa-Alfa valve (HDPE)

160 mm. Dia. NOS

Providing & installation of Anti Theft Mechanism for Alfa-Alfa valves with C:C 1:4:8 as per approved drawingss & specificationsto entire satisfaction of DSCO concerned

160 mm. Dia. NOS. 38 785

5 Providing & fixing single air valve ISI Marked as per IS-14845 including jointing all carriages complete.

C.I Double air valve (Size 50mm)(For 160 mm dia HDPE PIPE) NOS 13 2515.51

6 Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Supply & Jointing of 50 mm. Dia. G.I. Pipe (3mts for each ARV ) Mtr 39 721.9

7 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI

150mm i/d Sluice Valves flanged NOS 5 8914.18

8 Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:8329- 2000, Class-K9 and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

300 mm i/d pipe lines laid complete Mtr 40 6569.25

9 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra.

Class PN-1.0 as per ISI with gun metal flap

150mm i/d Non-return valve NOS 2 9197.42

10 Providing, lowering precast concrete NP-2 plain end pipes with collar and reinforcement, in trenches to correct gradient and alignment. cutting of reinforcement cement concrete, plain end pipe stringing in trenches, jointing ends and fixing collars with cement mortar 1:2 as per IS 456:2003 into trenches for all depths and laying out same to correct alignment, gradients, levels, etc., complete in respect

NP-2 400 mm i/d NOS 5 1226.27

11 Horizontal Direct Drilling for Drain Crossing (HDD) 400mm dia of drilling hole upto 400 mm mtr 20 10862

12 Horizontal Direct Drilling for Road Crossing (HDD) 400mmdia of drilling hole upto 400 mm mtr 6 7241

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. AMARGARH (2 MLD)

Abstract Sheet of Pump Room (6mx4m)

S.No. Description of items Unit Qty Rate (INR) Amount (INR)

1 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Cum 30.32 191.737

2 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 4.53 3812.61

3 Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 m Cum 3.92 344.4945

4 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. Cum 8.67 5697.32

5 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. Cum 9.93 6487.453

0.9 Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded Sqm 3.46 348.7085

6 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete Qtl 19.58 7919.612505

7 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). Sqm 34.43 221.235

8 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) Sqm 43.51 502.5195

9 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. Sqm 4.76 400.33

10 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Sqm 33.81 560.462

11 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. Cum 10.76 5426.57

12 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing Sqm 33.81 743.77

13 12.5 mm thick cement plaster 1:5 Sqm 127.8 190.683

14 12.5 mm thick cement plaster 1:4 Sqm 33.81 199.11

15 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish Sqm 161.61 84.28

16 Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface Sqm 161.61 22.1235

17 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Sqm 161.61 126.419

18 Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material Sqm 19.61 789.07

19 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material Sqm 9.81 424.5605

20 Floating coat of 1:5mm thick neat cement laid in one operation to the topping Sqm 19.61 30.5515

21 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge Mtr 7.6 244.412

22 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge 0

a UPVC 110 mm bend Nos 4 142.2225

23 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 Each 2 100.0825

24 Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position. Each 2 133.7945

25 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS code : 15658(2006) Sqm 9.81 679.5075

26 Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate. Kg 26.25 93.7615

27 Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with dia Sqm 2.52 4108.65

28 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) Kg 140 134.848

29 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area Sqm 8.82 629.993

30 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. Sqm 1.6 954.468

31 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 2.52 25.284

32 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade Sqm 2.52 69.531

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. AMARGARH (2 MLD)

Abstarct Sheet for Construction of Sump Well (2 Lakh Litre )

S.No. Description of items Unit Qty Rate as per A/C Slip 5 (5.35%) Amount (INR)

Sumpwell lumpsum 800000

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. AMARGARH (2 MLD)

ABSTRACT SHEET FOR COST OF PUMPING SYSTEM INSTALLATION

S.No. Description of items Unit Qty Rate (INR) Amount (INR)

1 Sewage De-Watering Submersible pump WITH FLOW RATE 1650 LPM @11.74 M head, including GST 18%, P & F 3% sunderies. Set 2 310128

2 Control Panel for 15 HP pumpset including GST 18%, sunderies. Contractor's profit and labour cess set 1 235988

INSTALLATION CHARGES FOR EACH PUMPSET

Sr. No. Particular Qty Rate Unit Amount (Rs)

1 PROVIDING AND FIXING OF NON CLOG SUBMERSIBLE PUMP FOR WASTE /RAW WATER PUMP MODEL NO- NS 65/16QT +18.5KW + 10 MTRS CABLE ,2900 RPM MOC OF PUMP : CASING :C.I , IMPELLER : CF8M , SHAFT -SS-410 PUMPSET. MECHANICAL SEAL ARRANGEMENT COMPRISING OF P/F of 4 inch Outlet Duct foot Bend , P&F OF GUIDE PIPE HOLDER AND INSTALLATION OF GUIDEPIPE HOLDER TO DUCT FOOT BEND , P&F OF GUIDE PIPES , P&F OF AUTO COUPLING ,P&F OF OG LIFTING CHAIN , P&F OF FLANGES AND WELDING ON DELIVERY PIPES FOR P&F OF KIRLOSKAR MAKE 4 INCH @100mm NRV, P&F OF KIRLOSKAR MAKE 4 INCH-100 mm SLUICE VALVES WITH GASKET AND SS-NUT BOLTS , AND DELIVERY PIPE CONNECTION TO COMMON HEADER 2 110483 per unit

Total Cost of Pumping System(a + b)

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. AMARGARH (2 MLD)

ABSTRACT SHEET FOR COST OF ELECTRICAL SYSTEM OF PUMP ROOM

S. No Description of Item Unit QTY. RATE (INR) Amount (INR)

1 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box) Each 2 1091.69

Wiring fan point (With fan box) Each 2 1210.21

Wiring light point Each 6 762.47

Wiring 6Amp. wall socket point Each 2 618.93

Wiring 16/20Amp. power plug control poin Each 1 478.03

2 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5sq.mm (Un-sheathed) Meter 100 36.98

Overall size 4 sq.mm (Un-sheathed) Meter 100 53.41

3 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring urposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed) Meter 50 70.8

4 G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).

Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) Each 3 3315.89

5 XLPE INSULATED ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

Overall size 95sq.mm (4Core) Armoured (Loose) Meter 200 538.6

Overall size 16sq.mm (4Core) Armoured (Loose) Meter 10 161.98

6 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C) Each 6 190.58

MCB Single Pole 40amp. (10kA, Curve-C) Each 1 395.38

7 RCCB's:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

RCCB Double Pole 16/25amp., Sensitivity 30mA Each 1 1948.13

8 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439- 1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 8 way each Each 1 1416.27

9 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

Cable Tray Size 150mm x 50mm x 50mm (2mm thick) Meter 10 1066.35

10 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling ith excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) Meter 200 290.77

Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : ( for detail specs refer technical specifications).

SECTION -1 INCOMER

mccb FOUR POLE 100 AMP, 415 volts ≥ 15kA Fixed Magnetic and adjustable Thermal Setting

METTERING AND CONTROLS

ON/OFF Phase indicating lamps with control fuses

Ammeeter complete with CT and selector switches as required

Voltmeter complete with selector switches as required

SECTION -1 INCOMER

mccb FOUR POLE 100 AMP, 415 volts 15kA Fixed Magnetic and adjustable Thermal Setting Each 1 100000

METERING AND CONTROLS

ON/OFF phase indicating lamps with control fuses.

Ammeeter complete with CT and selector switches as required

Voltmeter complete with selector switches as required

SECTION -2 BUSBARS

100 TPN, AI Bus Bars with hear shrinkable PVC Sleeves-1 Set.

Neutral Faillure

Surge Protection

High Voltage Protection

SECTION -3 OUTGOINGS

16/25 A, four pole RCCB 30 ma Sentivity 4 N.e+2SPARE

32A, DP, 25 Ka MCB-2 NO. + 2 SPARE

12 Supply and installation of Hevay Duty Exhaust fan 450 mm with 1400 rpm. Approved MakeCrompton, Havells, Bajaj or equivalent. Each 3 2436

13 Supply and installation of Led Tube light 20-22 watt with make of Phillips, Bajaj and Wipro. Item to include all amterial and lobour complete as per Specification and entire satisfaction of Engineer In Charge. Each 5 431

Department of Soil and Water Conservation, Punjab

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. AMARGARH (2 MLD)

Digital water flow meter

Sr. No. Description Unit Qty Rate (INR) Amount (INR)

1 Digital Water Meter (ULTRASONIC) Lumpsump 1 100000