Upgradation of Bungalow No. 1, Janpath Road, New Delhi - 110001

NAME OF WORK: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

SUMMARY OF COST

Sr. No. DESCRIPTION TOTAL AMOUNT (Rs.)

Sr. No. DESCRIPTION TOTAL AMOUNT (Rs.)

3.00 INTERIOR FINISHING WORK (Existing Block) 57,67,834.77 75,68,014.12 1,33,35,848.89

4.00 PLUMBING, WATER SUPPLY & DRAINAGE WORKS 12,11,954.23 17,80,439.86 29,92,394.09

5.00 LANDSCAPE & HORTICULTURE WORKS 39,33,767.15 - 39,33,767.15

6.00 ELECTRICAL AND LV SERVICES WORKS 48,77,968.33 23,37,947.52 72,15,915.85

9.00 INTERCOM SYSTEM WORKS 7,85,915.84 7,85,915.84

GRAND TOTAL (DSR + Non-DSR) 4,24,44,859.32

GRAND TOTAL (DSR + Non-DSR) 4,24,44,859.32

(Inclusive of GST/ Taxes, Cess etc.)

Digitally signed by MAHABIR

SCHEDULE OF QUANTITIES - DISMENTLING WORKS

Name of Work: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

S. No. DSR/NS AMOUNT (Rs.)

Cost Cess DSR Rate

DESCRIPTION UNIT QTY RATE

Index Factor i/c factors

DSR 2023 (DSR) (NON DSR)

SUB HEAD-I (DEMOLITION & DISMANTLING WORKS - Interior & Exterior works)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of

1 15.56 rubbish to the dumping ground within 50 metres lead.,, all complete as per the direction of Engineer-In- SQM 2019.00 54.65 1.03 0.973 54.77 1,10,579.99

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal

2 15.57 of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by SQM 367.00 56.35 1.03 0.973 56.47 20,725.74

Engineerin- charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres

3 15.23 lead as directed by Engineerin- charge. SQM 367.00 73.40 1.03 0.973 73.56 26,996.79

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave,

4 15.12.1 holdfasts etc. complete and stacking within 50 metres lead : as directed by Engineerin- charge. Of area 3 EACH 46.00 367.20 1.03 0.973 368.00 16,928.19

sq. metres and below

Demolition of brickwork manually/ by mechanical means including stacking of serviceable material and

5 15.7.4 disposal of unserviceable material within 50 metres lead as per the direction of the engineer in charge CUM 14.00 2,060.20 1.03 0.973 2,064.71 28,905.97

SUB HEAD-II (DEMOLITION & DISMANTLING WORKS - Nearby Structure which has to demolish)

Demolition of brickwork manually/ by mechanical means including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead as per the direction of the engineer in charge

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50

metres lead as per direction of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) CUM 52.47 2434.25 1.03 0.973 2,439.58 1,27,993.84

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of

unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical

5 15.60 means, including loading, transporting, unloading to approved municipal dumping ground or as approved by CUM 22.32 263.95 1.03 0.973 264.53 5,904.09

Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall

be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal

7 15.57 of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by SQM 42.78 56.35 1.03 0.973 56.47 2,415.99

Engineerin-charge.

Dismantling door, windows and clerestory widows (steel or wood) shutter including chowkats, architrave,

8 15.12.1 holdfasts etc complete and stacking within 50 metres lead EACH 8.00 367.20 1.03 0.973 368.00 2,944.03

Of area 3 sq. metres and below

2 Digitally signed by MAHABIR

S. No. DSR/NS AMOUNT (Rs.)

Cost Cess DSR Rate

DESCRIPTION UNIT QTY RATE

Index Factor i/c factors

DSR 2023 (DSR) (NON DSR)

Shifting of existing shed of size approx. 3.0 m × 3.0 m from existing location to new location within same

premises including careful dismantling, loading/unloading, manual shifting, re-erection, alignment, welding,

fixing, grouting of base plate, touch-up painting, replacement of minor damaged accessories, all labour and

9 NS-1 incidental works complete as directed by Engineer-in-Charge. L.S. 9.00 5000.48 - 45,004.33

Shifting of existing furniture, Households by deploying of Professional agency / manpower including

10 NS-2 Furniture Packing, Loading, Unloading, unpacking and keeping at required place as directed by EIC L.S. 1.00 250000.00 - 2,50,000.00

11 NS-3 Salvage value of generated scrap/debris from demotition L.S. 1.00 -150000.00 - -1,50,000.00

Grand Total (DSR + Non-DSR) 7,34,705.75

Grand Total (DSR + Non-DSR) 7,34,705.75

3 Digitally signed by MAHABIR

SCHEDULE OF QUANTITIES - NEW BLOCK WORKS

Name of Work: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate

DESCRIPTION UNIT QTY RATE

Index Factor i/c factors

DSR 2023 (DSR) (NON DSR)

SUB HEAD-I (EARTH WORK)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan

including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in

2 2.25 depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. Cum 21.60 196.00 1.03 0.97 196.43 4,242.87

3 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Cum 22.34 2123.75 1.03 0.97 2128.40 47,541.16

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12

4 2.35.3.1 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Sqm 49.64 310.05 1.03 0.97 310.73 15,423.59

Chlorpyriphos/Lindane E.C. 20% with 1% concentration

SUB HEAD-II (CEMENT CONCRETE -CAST IN SITU)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up

to plinth level :

4.10.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from

natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.10 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to plinth level :

5.10.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size

derived from natural sources)

7 5.90 Centering and shuttering including strutting, propping etc. and removal of form for

5.90.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 22.68 392.15 1.03 0.97 393.01 8,913.44

SUB HEAD-III (SUPER STRUCTURE WORK)

Dry wall work/LGSF wall

Providing and fixing of external wall system on Light gauge steel framework with outer face cement boards as per standard

sizes fixed with selfdrilling/ taping screws / fasteners @ 60 cm c/c of approved make. A groove of 2 mm to 3 mm shall be

maintained and grooves shall be sealedwith silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall

be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. Internal face

8 26.42 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self- drilling / taping screws /

fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic

based jointing compound for seamless finish.(cost of frame work to be paid for separately)

Outer face- Outer face having 6 mm thick fiber cement board Type A, Category-IV as per IS:14862:2000 fixed on 9 mm thick

fiber cement board, Type A, Category-IV as per IS:14862:2000 (high pressure steam cured) Inner Face- 12.5 mm thick gypsum

26.42.1 plaster board conforming to IS 2095:2011 fixed on 8 mm thick fibre cement board of Type B, Category-III as per IS:14862:2000 sqm 368.06 3903.35 1.03 0.97 3911.90 14,39,828.95

(High pressure steam

Supplying and installation of moisture resistant/fire resistant cement board as per standard sizes fixed with self-drilling / taping

9 26.45 screws. Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45

26.45.1 Cement Fiber Board 6 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured) Sqm 368.06 1430.15 1.03 0.97 1433.28 5,27,539.52

SUB HEAD-IV (PUFF INSULATED ROOF with LGSF TRUSS & JOISTS)

Proving & fixing insulated 50/80mm Roof cladding over lgsf trusses, joist or purlins systems, roofing shall be done with

sandwich type panels. The panels shall be made out with 0.5 mm thick Pre coated Profile (PPGL) sheets at outer side and 0.5

10 NS-1 mm thick Pre coated plain (PPGL) sheet at inner side of PUF. Total thickness of roof panel shall be 50 mm. PU must be CFC Sqm 190.58 5060.00 9,64,311.14

free, self-extinguishing type having density of 40Kg/CUM. (± 2Kgs). Color: Off white/Off white (Make -cactus, green building

asociation (GRIHA) approved with ZED certification )

4 Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate

DESCRIPTION UNIT QTY RATE

Index Factor i/c factors

DSR 2023 (DSR) (NON DSR)

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.)

and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear

portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average)

11 11.52 thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including

pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc.

all complete as specified and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona,

Fire Red or Dark Emperadore etc.

12 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

11.55 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions

of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of

13 cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting

of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm

long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

14 12.45 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150

mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over

the plastered wall surface to prepare the surface even and smooth complete.

SUB HEAD-V (EXTERIOR FINISHING)

16 13.44 Finishing walls with water proofing cement paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less

than 50 gram/litre

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over

an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than

19 13.83.2 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even Sqm 278.66 142.8 1.03 0.97 143.11 39,879.94

shade and colour.

5 Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate

DESCRIPTION UNIT QTY RATE

Index Factor i/c factors

DSR 2023 (DSR) (NON DSR)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows &

other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/whea husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with

miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum

frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of

20 26.86 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of

required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid

for separately).

Providing and fixing factory made DGU or glazing Factory Made extruded Aluminium section window/Clerestory windows &

other Frames complete as per direction of Engineer-In- Charge.

SUB HEAD-VI (GRC COLUMNS, ENTABLATURE & DECORATIVE PROFILES IN NEW BLOCK)

Providing and fixing GRC (Glass-fibre Reinforced Concrete) Tuscan/Doric column — shaft + base + capital as 3-piece

22 NS-3 assembly, hollow-cast, 18-20mm wall thickness, internal MS armature, anchored at top to RCC beam and at bottom to PCC pad Each 12.00 1,000 12,000.40

with chemical anchors. Height & dia per architectural detail(Unistone or equivalent)

23 NS-4 GRC column base block (moulded square plinth section) — including bedding mortar Each 12.00 500.18 6,002.10

24 NS-5 GRC column capital (Tuscan/Doric — abacus + echinus profile) — fixed to shaft with SS dowels + epoxy Each 12.00 500.18 6,002.10

GRC architrave / entablature band along column line — moulded continuous profile, jointed every 1.5m max, fixed to RCC

beam with SS anchors

26 NS-7 GRC cornice projection at portico top — moulded profile up to 300mm projection, with internal weep & drip detail RM 60.50 500.18 30,260.59

27 NS-8 GRC parapet coping at top of portico — weathered top, drip both sides RM 60.50 559.69 33,861.22

28 NS-9 GRC porch for existing CM House (SIZE : 8M x 7.50M) RM 60.00 38,025.94 22,81,556.30

Grand Total (DSR + Non-DSR) 98,02,110.80

Grand Total (DSR + Non-DSR) 98,02,110.80

6 Digitally signed by MAHABIR

SCHEDULE OF QUANTITIES - INTERIOR FINISHING WORK (Existing Block)

Name of Work: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE

Index Factor factors

DSR 2023 (DSR) (NON DSR)

SUB HEAD-I (CIVIL WORKS)

(DSR - 2023, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

(DSR - 2023, 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

3 manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. for Internal Sqm 2019.00 156.50 1.03 0.973 156.84 3,16,665.48

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic

(DSR - 2023, Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50

13.85.3) grams/litre for Internal Walls

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less

than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior

(DSR - 2023, paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over

13.48A.1) and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. For External Walls

6 NS-1 Additional cost for ULTIMA PROTECT + ALLURA TEXTURE Sqm 690.00 1,706.93 11,77,778.68

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of

approved manufacturer and of required shade and colour all complete to achieve even shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement primer having

VOC content less than 50 gram/litre

8 NS-2 Additional cost for NILAYA ARC PEARL Sqm 1328.88 614.14 8,16,114.79

Providing 10mm thick plaster of Paris (Gypsum anhydrous) ceiling up to a height of 5m above floor level, over

(DSR - 2023, first class kail wood strips 25x6 mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to

12.31.1) wooden frame (frame to be paid seperately) for Flat surfaces

Providing 10mm thick plaster of Paris (Gypsum anhydrous) ceiling up to a height of 5m above floor level, over

(DSR - 2023, first class kail wood strips 25x6 mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to

12.31.2) wooden frame (frame to be paid seperately) for Curved surfaces

Providing 10mm thick plaster of Paris (Gypsum anhydrous) ceiling up to a height of 5m above floor level, over

(DSR - 2023, first class kail wood strips 25x6 mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to

12.33) wooden frame (frame to be paid seperately) for Sunk or raised moundings

(DSR - 2023, Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New Work -

13.69.1) Doors'

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing of edges to give high gloss finish etc. complete at all levels.

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand

14 DSR 4.11 (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural Sqm 39.60 411 1.03 0.973 411.75 16,305.29

7 Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE

Index Factor factors

DSR 2023 (DSR) (NON DSR)

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement

concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/

Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without impairing strength;

including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of

15 DSR 4.20.1.2 centering, shuttering and finishing as per direction Cum 39.60 8986 1.03 0.973 9,005.83 3,56,630.85

of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum

specified cement content in design mix shall be payable separately. In case the cement content in design mix

is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement. All works upto plinth level: Concrete of M15 grade with

minimum cement content of 240 kg /cum

TERRACE WATERPROOFING Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of

following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick

bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1

cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge over 20 mm thick layer of cementmortar of mix 1:5 (1 cement :5 coarse sand) admixed

with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope

and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and

16 22.7 slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of

cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand)

admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge

including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with

trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace

so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. ―All

above operations to be done in order and as directed and specified by the Engineer-in-Charge‖:

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sqm 393 1684.6 1.03 0.973 1,688.29 6,63,497.68

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement

slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement

@ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to

air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

17 22.5 compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 Sqm 30.05 617.05 1.03 0.973 618.40 18,582.96

hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes

and masonry with polymer mixed slurry.

18 NS-3 Pipe sealing for Rain Water/Soil Pipe with common sealing materials like M-Seal or epoxy paste Nos. 20 1190.29 23,805.79

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart

including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand)

19 2.35.3 to match the existing floor: Sqm 396.00 310.05 1.03 0.973 310.73

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

20 SWITCHABLE GLASS FILM IN WINDOWS Sqm 45.10 25110.04 11,32,537.92

Providing and fixing at all height wall panelling of Laminated calcium-polymer composite sheet/ Charcoal

21 NS-5 Panels/ Italian Marble including providing and fixing to frame work and base as per direction of Engineer-in- Sqm 665.00 4,469.92 29,72,494.04

SUB HEAD-II (FLOORING WORKS)

8 Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE

Index Factor factors

DSR 2023 (DSR) (NON DSR)

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in

linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over

20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white

22 11.52 cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the Sqm 220.00 6,927.35 1.03 0.973 6,942.52 15,27,354.60

marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

11.52.1 18 mm thick Italian Marble stone

SUB HEAD-III (DOOR/WINDOW WORKS)

Providing and fixing factory made DGU or glazing Factory Made extruded Aluminium section

window/Clerestory windows & other Frames complete as per direction of Engineer-In- Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/whea husk) and non

toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC

solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of

24 26.86 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of

58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S

hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.

(M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door

shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate

and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12

for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900

N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to

25 26.87 spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star

headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt

hinges and necessary S.S screws shall be paid separately)

Grand Total (DSR + Non-DSR) 1,33,35,848.89

Grand Total (DSR + Non-DSR) 1,33,35,848.89

9 Digitally signed by MAHABIR

Name of Work: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

S.N DESCRIPTION Amount (DSR) Amount (NSR)

A PLUMBING WORKS

1 SUB HEAD-1.0 SANITARY INSTALLATIONS 1,84,018.32 5,47,791.43 7,31,809.75

WATER SUPPLY PUMPS, DRAINAGE SUMP PUMPS &

Digitally signed by MAHABIR

SCHEDULE OF QUANTITIES - PLUMBING WORKS

Name of Work: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

SUB HEAD-1.0 SANITARY INSTALLATIONS

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white vitreous china

1 17.78 cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 Each 5 14,999.15 1.03 0.973 15,032.00 75,159.99

litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole

2 17.7A basin mixer of approved quality and make, including painting of fittings and brackets,

cutting and making good the walls wherever required:-

White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink of approved make as

per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of

fittings and brackets, cutting and making good the walls wherever required.

17.10.1 Kitchen sink with drain board

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and

as per the direction of Engineer-in-charge.

17.28 Providing & fixing heavy quality PVC waste pipe for sink including PVC waste fitting

17.28.2 Flexible Pipe

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

6 17.31 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. Each 5 5,955.37 1.03 0.973 5,968.41 29,842.06

brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on

7 17.33 anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed Each 5 1,083.50 1.03 0.973 1,085.87 5,429.36

with 40 mm long screws, rawl plugs etc., complete.

8 17.34 Providing & fixing toilet paper holder

Providing and fixing approved make hand shower (Health faucet) of 1.2mtr long with

9 NSR 1 8mm dia Easy Flex Tube with wall hook and flow restrictor with flow rate 6 litre per Each 5 3,741.81 18,709.07

minute at 3 bar in chrome finish and wall hook.

Providing, Fixing, Jointing, testing and commissioning of uPVC SWR pipe type 'B as

per IS 13592, solvant joint for sunken type for suspended with molded fittings as per IS-

14735, concealed in wet or dry walls including all fittings such as bends in proper

alignment, Y, Tee, junction, vent cowls, offset, access pieces (Plain or door), Exposed

NSR - 2 pipes will also be provided with painting of legends with direction arrow. etc. As per

10 BASED ON approved shop drawing. Cost shall includes fixing at wall / ceiling level making holes

DSR complete with necessary hydraulic test. All pipe supports shall be of MS hot dip

galvanised with 85 micron galvanisation with rubber insert(sizes indicated are nominal

outside diameter)

(a) 75 mm diameter pipe Metre 35 1,720.47 60,216.33

(b) 110 mm diameter pipe Metre 50 2,170.08 1,08,503.96

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

Providing, fixing, testing and commissioning of uPVC inlet hopper with two or three

inlets fittings to receive waste pipes from fixtures waste. The hopper shall be fabricated

from 110 mm dia upto 600 mm long pipe complete etc. as per engineer in charge.

Providing, fixing, testing and commissioning of uPVC P trap (FLOOR TRAP) of self

NSR -4 cleaning design with screwed down or hinged grating without vent arm with Setting in

12 BASED ON cement concrete 1:2:4 mix complete and provision for connecting inlet fitting complete Each 10 1,625.38 16,253.81

DSR including cost of cutting and making good the walls and floors.

110 mm OD inlet and 110 mm OD outlet.

NSR -5 Providing, fixing, testing & commissioning of Floor drain made of uPVC reducing elbow

13 BASED ON (110x63 mm) with horizontal drain outlet of 63 mm OD, round top of 110 mm OD. (Floor Each 6 963.71 5,782.29

Providing & fixing Autometic soap dispenser of approved brand & make of approved

quality and colour, complete as per direction of Engineer in Charge.

NSR - 7 Providing, Fixing of CP brass Towel Ring with CP brass wall brackets and providing &

16 BASED ON fixing CP brass screws complete as required. Each 5 2,274.11 11,370.55

Supply and installation of the towel shelf 600 mm long in a Polished Chrome finish

consisting of space for folded towels along with a dedicated bar for hanging wet towels.

Rate shall include all required hardwares, screws etc complete as per drawing and as

directed by EIC.

18 NSR - 9 Providing & fixing soap dish holder of approved design. Each 3 1,356.17 4,068.51

Providing and fixing CP brass single lever low flow wall mounted Sink mixer with 15 mm

CP brass single lever swivel spout with waste complete with flow rate 2.5 litre per minute

at 3 bar including cutting and making good the walls where required.

Providing and fixing of Shower set as per following deatails-

Concelaed type CP Brass diverter(for hot and cold water), overhead shower with

arm with rubit cleaning system with flow rate 6 litre per minute at 3 bar, hand

20 NSR 11 shower, CP valves etc complete with all accessories as required and spout with Each 3 19,834.77 59,504.32

flow rate 3.8 litre per minute at 3 bar, wall flange complete with all accessories as

required and making good the walls wherever required.

Providing,Fixing wall mounted of approved make Double Coat hook on door complete.

Providing and fixing CP brass 2 Way Bib cock with wall flange with flow restrictor with

flow rate 2.5 litre per minute at 3 bar.

Providibng and fixing straight type approved make single body push fit type WC pan

connector with factory supplied spring loaded seal guard of approved make with integral

23 NSR 14 single mould sealing fins made of flexible EVA body, including bush/adaptor for use with Each 5 709.11 3,545.54

C.I. Pipe as supplied with the pan connector.

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

Supplying, fixing, testing and commissioning of uPVC agricultural pipes (6Kg/sqcm)

conforming to IS 4985 for waste connection from wash basin to floor trap/anti syphonage

pipe with solvent cement joints, including all the fittings, laid in the sunken slab etc, the

14 NSR 15 work shall include wall chase and making good the same in cement mortar etc.,

complete.The quoted rate should include necessary supports like hanger supports, grip

bolts and clamps etc.

Providing, fixing, testing and commissioning of uPVC clean out plug for suspended

pipes, with suitable inlet key for opening, complete as required.

Providing and fixing Cockroch Trap /Jaali of 125 mm dia of approved quality and colour

complete as per direction of engineer in charge.

25.1 (a) Circular Type -

i 125 mm nominal dia with 25 mm with waste hole Each 5 844.60 4,222.99

ii 125 mm nominal dia without waste hole Each 3 712.91 2,138.72

Providing & Fixing of Bathroom Drain with Sealing flange with removable trap, (Storage

Water Height 50 mm-Water Seal), with protection plug with Three rotable supply DN50,

with horizontal drain socket, with outlet 70/ 100 mm. (Body and Top Frame made of

environmentall friendly PP (poly propylene)

Providing, Installing & fixing storage type water heater (Geyser) of approved make

(vertical/horizontal type ) with copper container, glasswool insulation,stove enamelled

M.S jacket, thermostatically controlled inner heater with pilot neon lamps, 15mm inlet

stop cock valve, on inlet connection, 15mm dia C.P flexible connection pipe in inlet &

outlet suitable for working pressure of 8 kg/sqcm complete as required.

27.1 (a) Capacity 25 litres Each 2 13,294.52 26,589.03

Providing, Installing & fixing storage type instant water heater (Geyser) of approved

make (vertical/horizontal type ) with copper container, glasswool insulation,stove

enamelled M.S jacket, thermostatically controlled inner heater with pilot neon lamps,

15mm inlet stop cock valve, on inlet connection, 15mm dia C.P flexible connection pipe

in inlet & outlet suitable for working pressure of 8 kg/sqcm complete as required.

28.1 (a) Capacity 5 litres Each 2 5,317.05 10,634.09

Providing, installing, testing and commissioning of Domestic RO system storage capacity

9 Letre, 20 LPH with inbuilt storage tank. RO+UV+UF+TDS Control+UV In-tank, and

Zero Water Wastage Technology complete with all accesseries as required.

29.1 (a) 9 Letre storage , 20 LPH EACH 2 22,332.31 44,664.62

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

30 17.80 approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml Each 1 7,979.20 1.03 0.973 7,996.67 7,996.67

consumption), having water inlet from back side, including fixing to wall with suitable

brackets all as per manufacturers specification and direction of Engineer-in-charge.

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab table rubbed,

edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate

width with chase cutter and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm

nominal size) as per direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Each 1 4,051.85 1.03 0.973 4,060.72 4,060.72

TOTAL OF SUB HEAD 1 - SANITARY INSTALLATIONS 1,84,018.32 5,47,791.43

SUB HEAD-2.0-WATER SUPPLY

NSR-22 Supply and Application of closed cell elastomeric insulation with glass cloth facing and

UV treatment (XLPE) in tubing form/ flat sections for Hot water piping as per the

specifications including all required accessories, protection as per manufacturer's

recommendations, complete in al respect. Quoted price shall be inclusive of LEED

Compliant adhesive and aluminum cladding as per specifications.

6 mm thick (Concealed Pipes) & 13 mm thick (Exposed Pipes)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.2 20 mm nominal outer dia Pipes Metre 50 537.60 1.03 0.973 538.78 26,938.87

18.8.3 25 mm nominal outer dia Pipes Metre 30 627.25 1.03 0.973 628.62 18,858.71

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

32 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on Wall

18.7.4 32 mm nominal outer dia Pipes Metre 50 518.75 1.03 0.973 519.89 25,994.30

18.7.5 40 mm nominal outer dia Pipes Metre 30 702.95 1.03 0.973 704.49 21,134.68

18.7.6 50 mm nominal outer dia Pipes Metre 20 934.15 1.03 0.973 936.20 18,723.92

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply including all CPVC plain & brass threaded fittings This

33 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete as per direction of Engineer in Charge.

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

18.9.3 25 mm nominal outer dia Pipes Metre 35 355.40 1.03 0.973 356.18 12,466.24

18.9.4 32 mm nominal outer dia Pipes Metre 10 438.60 1.03 0.973 439.56 4,395.61

Providing and fixing motorised butterfly valve rating PN 1.0 with float type sensors

suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control

34 NSR-23 panel and sensors to open valve when water level is low in tanks and to close when

water level is high in water tanks including butterfly valves, necessary cables, conduits,

upto junction box etc. complete.

Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end

35 NSR 24 & PN 16 rating as specified.

Making rain water khurras 45 x 45 cm with average minimum thickness 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size) over PVC sheet 1 m x 1 m x 400 micron, finished with 12 mm plaster in cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement including

rounding of edges and finishing of outlet complete in all respects.

37.1 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to

IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 meter 80 377.40 1.03 0.973 378.23 30,258.12

mm gap for thermal expansion, (i) Single socketed pipes.

12.41.2 110 mm diameter

37.2 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter

and weighing not less than 440 grams.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed

39 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in

external work :

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS

: 12701 marked, with cover and suitable locking arrangement and making necessary

holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms.

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

Providing and fixing C.P. brass angle valve for basin mixture and geyser points of

approved quality confirming to IS: 8931.

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts,

44 18.59 rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed

(a) 15mm nominal bore Each 2 1,362.50 2,725.00

Providing & fixing CI `Y' Strainer (screwed/ flanged) with stainless steel fine wire mesh

46 NSR 27 perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete

46.1 (a) 65mm nominal bore Each 1 7,896.43 7,896.43

Water Meter :- Providing, Installing and Giving satisfactory field testing of Static

(Ultrasonic) Domestic Battery operated, MID (Measuring Instrument Directives) approved

Static AMR Water Meters diameters having no moving/fixed part in contact with water,

with fully body made up of composite material, confirming to ISO 4064 along with

47 NSR 28 manufacturing test certificate and Guarantee certificate with Meter & Battery Guaranteed

up-to 10 years with RF Technology for communication. Memory of the device should be

directly accessible through an optical scanner.

Providing, laying and joining in position HDPE pipes with slipon flange, High density

Poly Ethylene pipe and conforming to I.S. 4984-1995 of required grade / class, 08

kg/sq.cm pressure and suitable for the respective working pressures with all fittings and

48 NSR 29 specials, e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces,

etc., jointing as per manufacturers recommendations, all complete including trenching,

backfilling & pressure testing etc. (For Irrigation System).

TOTAL OF SUB HEAD - 2 -WATER SUPPLY 4,12,604.08 1,36,995.20

SUB HEAD : 3.0- DRAINAGE

Providing, laying and joining in position HDPE DWC (Double Wall Corrugated) and

conforming to I.S. 16098 of required grade SN-4/SN-8 and suitable for the respective

working pressures with all fittings and specials, e.g. couplings, tees, bends, reducers,

49 NSR 30 screwed adapters, flanged tail pieces, etc., jointing as per manufacturers

recommendations, all complete including trenching, backfilling & pressure testing etc.

(For Sewer & Storm water line).

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded

50 19.2 stone aggregate 40 mm nominal size) all-round HDPE pipes/ RCC pies/S.W. pipes

including bed concrete as per standard design:

50.1 19.2.2 150 mm diameter HDPE pipe/ RCC pipe / S. W. pipe Metre 70 1,179.85 1.03 0.973 1,182.43 82,770.37

50.2 19.2.3 200 mm diameter HDPE pipe/ RCC pipe / S. W. pipe Metre 90 1,375.45 1.03 0.973 1,378.46 1,24,061.60

50.3 19.2.4 250 mm diameter HDPE pipe/ RCC pipe / S. W. pipe Metre 10 1,590.55 1.03 0.973 1,594.03 15,940.33

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70

kg as per standard design :

51.1 19.4.3 180 x 150mm size P-type

51.2 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5 2,802.15 1.03 0.973 2,808.29 14,041.43 -

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :

Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x

610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. (

weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class

designation 7.5

52.1.1 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 12,770.55 1.03 0.973 12,798.52 76,791.11 -

53 19.8 Extra for depth for manholes:

19.8.1 Size 90 x 80 cm

19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 2 8,825.40 1.03 0.973 8,844.73 17,689.46 -

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as

per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross

section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with

minimum 112 mm space between protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with stand the bend test and

54 19.16 chemical resistance test as per specifications and having manufacture's permanent Each 25 553.70 1.03 0.973 554.91 13,872.82 -

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required

shape and approved quality

19.19.3.1 Circular shape 560 mm internal diameter Each 3 1,675.70 1.03 0.973 1,679.37 5,038.11 -

Making connection of drain or sewer line with existing manhole including breaking into

and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides

with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat

cement and making necessary channels for the drain etc. complete :

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

DESCRIPTION UNIT QTY RATE Cost Index Cess Factor NSR Rate

DSR 2023 (DSR) (NON DSR)

Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement

57 19.27 mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal -

grating with frame complete as per standard design.

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 15 5,957.90 1.03 0.973 5,970.95 89,564.22 -

58 2.10.1 Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

out the excavated soil, and then returning the soil as required, in layers not exceeding 20

cm in depth, including consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia meter 240 352.15 1.03 0.973 352.92 84,701.09

59 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc. complete :

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including

60 19.24 stacking of useful materials near the site and disposal of unserviceable materials within

50 m lead as per direction of Engineer- charge :

19.24.1 Rectangular manhole 90x80 cm and 45 cm deep each 2 2,540.85 1.03 0.973 2,546.41 5,092.83

19.24.2 Rectangular manhole 120x90 cm and 90 cm deep each 2 4,475.50 1.03 0.973 4,485.30 8,970.60

61 19.25 Extra for depth of manholes dismantled :

19.25.1 Rectangular manhole 90x80 cm and beyond 45 cm depth meter 2 2,045.50 1.03 0.973 2,049.98 4,099.96

19.25.2 Rectangular manhole 120x90 cm and beyond 90 cm depth meter 2 2,436.90 1.03 0.973 2,442.24 4,884.47

Constructing brick masonry chamber for underground C.I. inspection chamber and bends

with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light

duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less

62 19.30 than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with

1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size),

foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse

sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete as per standard design:

Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :

19.30.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1 9,504.35 1.03 0.973 9,525.16 9,525.16

TOTAL OF SUB HEAD 3 -DRAINAGE 5,97,942.33 2,34,222.57

Digitally signed by MAHABIR

SCHEDULE OF QUANTITIES - WATER SUPPLY PUMPS, DRAINAGE SUMP PUMPS & EQUIPMENTS WORKS

Name of Work: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE NSR Rate

Index Factor factors

DSR 2023 (DSR) (NON DSR)

WATER SUPPLY PUMPS, DRAINAGE SUMP PUMPS &

1.0 NS-1 TRANSFER PUMP

Supply & assisting in Installation, Testing & Commissioning of

Horizontal/Vertical centrifugal pumps for filtration & softening system.

The pumps shall be made of CI casing, SS-304 Impellar, SS-304 shaft

& sleeve, Mechanical Seal are connected to a TEFC induction motor

mounted on a common channel base frame with coupling guard, Motor

to be suitable for 415 ± 10%, 3 Phase, 50 ± 5% Hz cycles AC power

supply, Strainer at suction and other stater/panel accessories and

concrete foundation complete as required.

Duty Parameter of transfer pump

■ No. of pumps - 2 Nos. (1W+1S)

■ Capacity - 100 LPM

■ Head - 35 Mtr

■ HP - 2.0 (For each)

■ Including pump

Supply, fixing, Installation, testing & commissioning Set 1 1,43,909.85 - 1,43,909.85

Foundation shall be part of Civil work and executed by Civil Contractor

as per pump manufacturer GA/Foundation drawings.

Vendor to submit the Technical submittal comprising of Technical data

sheet, performance curve, Technical catalogue, dimension detail,

installation detail of the proposed/selected model for review and

approval of Consultant.

Hydropneumatic Pumping System With Variable Frequency Drive

For domestic water supply at Terrace Level

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE NSR Rate

Index Factor factors

DSR 2023 (DSR) (NON DSR)

Supply, Installation, Testing, & Commissioning a pre-engineered, factory

fabricated, assembled & tested, fully integrated, highly efficient pump,

skid mounted, complete ready-to-connect packaged variable speed

water pressure booster station,pump fitted with a 3-phase, fan-

cooled,permanent- magnet synchronous motors,motor efficiency is

classified as IE5 in accordance with IEC 60034-30-2.. The packaged

variable speed water pressure booster station shall be complete with

vertical inline multi stage centrifugal pumps , high efficiency IE5

motors.The motor integrated with dedicated frequency converter in the

motor terminal box. This enables continuously variable control of the

motor speed, which again enables adaptation of the performance to a

given requirement.The pump shall consist of Cast iron with CED coated

base & head, SS-304 casing chamber and impeller and SS-304 shaft

along with TEFC motor & mechanical seal, pressure transmitter, NRV,

Isolation valve on delivery line. Isolation valve(PN-16), stainer at suction.

The pump shall be suitable for 415±10% volts 3 phase AC. Supply,

complete in all respects as per directions of Engineer in charge.The

intelligent multi-pump controller, the controller shall be mounted in a

control cabinet with an IP 41 enclosure of suitable rating, digital energy

meter in the control panel; Modbus for BMS; hot Dipped Galvanised

suction and delivery CED coated manifolds; isolation ball valves on

suction and discharge of each pump; non return valve on discharge side

of each pump; flow meter with 4-20mA output; hot dip galvanised

common base frame; and diaphragm pressure vessel PN16

■ Pump Head - Cast Iron

■ Pump Base- Cast Iron

■ Impeller-SS 304

■ Chamber-Ss 304

Motor stool-Cast Iron

Shaft sealCartridge type(SiC/Carbon)

Rubber parts-EPDM

Efficiency class-IE5

Insulation class-F

Enclosure class-IP 55

Supply Frequency-50Hz

Supply voltage-3X380-415V

Built in Thermistor-PTC

Enclosure class-IP 41

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE NSR Rate

Index Factor factors

DSR 2023 (DSR) (NON DSR)

A dedicated intelligent multi-pump logic controller for control and

monitoring of pumps shall be from the pump manufacturer with easy

interface graphical display unit with key function. controller should able

to monitor multiple operating parameters (flow, inlet pressure, outlet

pressure, instant flow estimation, cumulative flow and speed etc) to

calculate best operating algorithm to pump sequence optimally.

Mentioned features should be available, automatic pump alternations for

run time equalization, Programmable number of starts/stops per hour to

prevent pump hunting, Friction Loss Compensation, Redundant primary

sensor for pressure monitoring, soft pressure built-up, log graph display

for key paramters, Clock program for multiple set point for scheduled

system operation.

Pressure tank capacity: (minimum 200 Ltrs capacity (approx.) or as per

manufacturer calculation / recommendation) Note: Back up calculation

need to be provided for the same. A pre-charged Carbon Steel body

diaphragm tank shall be fitted to the discharge pipe with a compatible

Butyl-rubber diaphragm. It shall supply water a very low flows to

minimize frequent pump start and stop and water hammering. There

shall be complete separation between water and air and there

should be no contact between water and tank compounds to avoid

corrosion. Bladders shall be suitable for sufficient elasticity to permit

full expansion inside the tank to ensure better performance and longer

Pressure Transmitter (0-10/16/25bar, based on system design pressure)

Pressure Gauge - 0-16bar

Suction & Delivery Manifolds - Hot Dip Galvanised Iron CED coated

All cast iron parts should be CED coated.

One non-return valve and isolating valves for each pump is provided in

delivery side and one isolating valve is provided in suction side.

No. of pumps - 2 Nos. (1W+1S) (for Domestic water supply at terrace

Capacity - 200 LPM

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipes & fittings

with one step CPVC solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in Charge.

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE NSR Rate

Index Factor factors

DSR 2023 (DSR) (NON DSR)

18.9.4 32 mm nominal outer dia Pipes Metre 5 438.60 0.973 1.03 439.56 2,197.80 -

18.9.5 40 mm nominal outer dia Pipes Metre 5 563.05 0.973 1.03 564.28 2,821.42 -

18.9.6 50 mm nominal outer dia Pipes Metre 5 794.25 0.973 1.03 795.99 3,979.95 -

4.0 NS-3 VIBRATION ELIMINATORS :

Providing, fixing, testing & commissioning of rubber neoprene lined style

arch vibration eliminators suitable pressure.

Pressure Rating PN 16 :

5.0 NS-4 Y - STRAINER :

Providing, fixing, testing & commissioning of Y type Strainer having cast

iron body [IS 210 Gr. FG 200], SS 304 Screen having 1.2 mm

performation, Flange end as per BS 10 Table F. Body Test Pressure

shall be 20 kg/cm2 Hydroulic complete with all Fitting & Drain Plugh &

6.0 NS-5 Ball Valve :

Providing and fixing brass ball valve suitable for 15kg/sqcm working

pressure full bore type with lever and female screwed ends, of approved

7.0 NS-6 NON-RETURN VALVE

Providing, fixing, testing & commissioning of CI wafer type single plate

non-return valve (PN 16) complete with 2 Nos. matching flanges, rubber

insertion, nuts, bolts and washer etc. of following sizes with locking

8.0 NS-7 BUTTERFLY VALVE :

Digitally signed by MAHABIR

S. No. DSR/MR AMOUNT (Rs.)

Cost Cess DSR Rate i/c

DESCRIPTION UNIT QTY RATE NSR Rate

Index Factor factors

DSR 2023 (DSR) (NON DSR)

Providing, fixing, testing & commissioning of level operated water type

butterfly valve conforming to IS : 13095/BS 5155 having CI iron body ,

ss 316 grade dick, EPDM / nitride complete with 2 Nos. matching

flanges, rubber insertion, nuts, bolts and washer etc. of following sizes

with locking arrangement. (including sump pump) :-

Pressure Rating PN 16 :

Providing, fixing, testing & commissioning of dial type (150 mm dia)

pressure gauge with isolation ball valve suitable for working pressure of

9.0 NS-8 250 PSI cost shall be of inclusive of providing any short pieces, nipples, Each 2 2,261 - 4,522.88

elbows etc as required. having calibration of 0-15 Kg/cm2.(Glycrine

10.0 NS-9 Electronic Digital Type Turbine Flow Meter :

Providing, fixing, testing & commissioning of Electronic Digital Type

Turbine Flow Meter/Totalizer having following specification:

● Internal Part (Roter) : Stainless steel SS 304.

● Mounting :Inline horizontal or vertical

● Reading : M3/Hour and Kilo-litter

● Flow rate display : 4 digitals LED.

● Totalizer display : 8 digitals LED.

● Output : 4-20mA (Integrated with BMS).

● Power supply : 220V AC/24 V DC

● Accuracy : ± 1%.

● Repeatibility : ± 1%.

● Operating temperature :0-50°C.

● Media : Liquid.

Maintenace :"Provision of bypass arrangement (Piping & Valves) Each 1 32,208.40 - 32,208.40

Providing, fixing, testing and commissioning of Fully Automatic micro-

controller based water level Controller and Water-Level LCD Display &

motor protector including sensor, Display Panel, cabling and all fitting

and accessories (For Underground Water Tanks).

TOTAL OF WATER SUPPLY PUMPS, DRAINAGE SUMP PUMPS &

EQUIPMENTS CARRIED OVER TO SUMMARY

Digitally signed by MAHABIR

SCHEDULE OF QUANTITIES - LANDSCAPE & HORTICULTURE WORKS

Name of Work: UPGRADATION OF BUNGALOW NO.1, JANPATH ROAD, NEW DELHI

S. No. DESCRIPTION QTY UNIT DSR RATE DSR AMOUNT (Rs.)

AS PER DSR-2025 FOR LANDSCAPE & HORTICULTURE

Trenching in ordinary soil up to a depth of 60 cm

including removal and stacking of serviceable

materials and then disposing of surplus soil, by

spreading and neatly leveling within a lead of 50 m

1 2.1 and making up the trenched area to proper levels by Cum 1,200.00 119.00 1,42,800.00

filling with earth or earth mixed with sludge or/and

manure before and after flooding trench with water

(excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site

including royalty and carriage up to 1 km (earth

measured in stacks will be reduced by 20% for

3 2.7 Fine dressing of the ground Sqm 4,000.00 5.60 22,400.00

Grassing with selection No.1 grass including watering

and maintenance of the lawn for 30 days or more till

the grass forms a thick lawn, free from weeds and

4 2.10 fit for mowing including supplying good earth, if -

needed (the good earth shall be paid for separately).

Preparation of beds for hedging and shrubbery by

excavating 60 cm deep and trenching the excavated

base to a further depth of 30 cm, refilling the

excavated earth after breaking clods and mixing

with sludge or manure in the ratio of 8:1 (8 parts

of stacked volume of earth after reduction by 20% :

one part of stacked volume of sludge or manure after

reduction by 8%), flooding with water, filling with earth

5 2.13 if necessary, watering and finally fine dressing, leveling Cum 360.00 339.85 1,22,346.00

etc. including stacking and disposal of materials

declared unserviceable and surplus earth by spreading

and leveling as directed, within a lead of 50 m, lift up to

1.5 m complete (cost of sludge, manure or extra earth

to be paid for separately).

Construction of granular sub-base by providing close

graded Material conforming to specifications, mixing in

a mechanical mix plant at OMC, carriage of mixed

material by tippers to work site, for all leads & lifts,

spreading in uniform layers of specified thickness with

6 16.78 motor grader on prepared surface and compacting -

with vibratory power roller to achieve the desired

density, complete as per specifications and directions

of Engineerin-Charge.

With material conforming to Grade-I (size range 75

mm to 0.075 mm) having CBR Value-30

Providing and laying 60 mm thick faciory made cement

concrete interlocking paver block of M -30 grade made

by block making machine with strong vibratory

compaction, of approved size, design & shape, laid in

7 16.68 required colour and pattern over and including 50 mm sqm 1440.00 972.00 13,99,680.00

thick compacted bed of coarse sand, filling the joints

with line sand etc. all complete as per the direction of

Engineer-in-charge.

Providing and laying flamed finish Granite stone

flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete

as per the architectural drawings with 18 mm thick

stone slab over 20 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

8 11.55 with cement slurry and pointing with white

cement slurry admixed with pigment of matching

shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-

Digitally signed by MAHABIR

S. No. DESCRIPTION QTY UNIT DSR RATE DSR AMOUNT (Rs.)

Flamed finish granite stone slab Jet Black, Cherry

Brown, Cat Eye or equivalent.

Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived

9 4.1.8 from natural sources : 8 graded stone aggregate 40 cum 10.00 6812 68,120.00

mm nominal size derived from natural sources)

Providing and laying at or near ground level factory

made kerb stone of M-25 grade cement concrete in

position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse

sand), including making joints with or without grooves

(thickness of joints except at sharp curve shall not to

10 16.69 more than 5 mm), including making drainage opening cum 40.00 10117.6 4,04,704.00

wherever required complete etc. as per direction of

Engineerin-charge (length of finished kerb edging shall

be measured to calculate volume for payment).

(Precast C.C. kerb stone shall be approved by

Engineer-in-charge).

SUPPLY OF PLANTS

Supply and stacking of Grevillea robusta (Silver Oak)

plant of height 150- 165 cm. in big poly bags of size 25

cm as per direction of the officer-incharge.

Supply and stacking of Plumeria acutifolia plant of

height 150-165 cm. with 3-4 branches in big size

HDPE bag as per direction of the officer-in-charge

Supply and stacking of Chorisia speciosa plant of

3 7.21 height 150-165 cm. in big poly bags of size 25 cm as Nos 35.00 86.65 3,032.75

per direction of the officer-in-charge.

Supply and stacking of Bauhinia blakeana (Kachnar)

plant of height 120- 150 cm. in big poly bags of size 25

cm as per direction of the officer-in-charge.

Supply and stacking of Bottle palm plant of ht. 210-240

5 7.11 cm bottom girth 30-35 cm well developed in big HDPE Nos 100.00 379.15 37,915.00

Providing and displaying of Areca Palm plant, having

ht. 2.40 m to 2.70 m with 12 to 14 suckers, well

6 3.22 developed, fresh and healthy with lush green foliage in Nos 100.00 647.75 64,775.00

35 cm size of Bucket type cement pots & as per

direction of the officer-in-charge.

Providing and stacking of Hibiscus rosasinensis of

7 8.37 height 90-105 cm., bushy in big size HDPE bag as per Nos 300.00 90.00 27,000.00

direction of the officer-in-charge.

Providing and stacking of Cassia fistula (Amaltash) of

height 120-135 cm.

Providing and stacking of Ficus benghalensis

9 7.28 (Banyan) height 120-135 cm. in poly bag size 25 cm as Nos 4.00 69.80 279.20

per direction of the officer-in-charge.

Providing and stacking of Ficus religiosa (Peepal)

10 7.36 height 150-165 cm. in poly bag size 30 cm as per Nos 4.00 72.20 288.80

direction of the officer-in-charge.

Digging holes in ordinary soil and refilling the same

with the excavated earth mixed with manure or

sludge in the ratio of 2:1 by volume (2 parts of

stacked volume of earth after reduction by 20% : 1

part of stacked volume of manure after reduction

11 2.14 by 8%) flooding with water, dressing including

removal of rubbish and surplus earth, if any, with all

leads and lifts (cost of manure, sludge or extra good

earth if needed to be paid for separately) :

2.14.2 Holes 90 cm dia, and 90 cm deep Each 768.00 155.50 1,19,424.00

Digitally signed by MAHABIR

PROJECT :- Upgradation of Bungalow No. 1, Janpath Road, New Delhi - 110001

SUMMARY OF ELECTRIAL WORK

S. NO. ITEM DESCRIPTION

A. ELECTRICAL AND LV SERVICES

I. POINT WIRING 1197241.33

II. LIGHT FITTING & FANS 257930 15 27 576

III. DISTRIBUTION PANELS 46693 2 07 585

IV. EARTHING, CABLES & CABLE TRAY 237378 5 57 910

V. EV CHARGER 350914

VI. UPS / INVERTER 168506

VII. SOLAR SYSTEM 1357000

VIII. CCTV SYSTEM 542313 43 700

IX. TV / TELEPHONE & LAN- WIFI SYSTEM 719993 1 177

TOTAL FOR ELECTRICAL WORK 48 77 968 23 37 948

Digitally signed by MAHABIR

PROJECT :- Upgradation of Bungalow No. 1, Janpath Road, New Delhi - 110001

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

I. POINT WIRING

1 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium

class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable

etc. as required.

2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way

modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single

core cable etc. as required.

3 1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required.

3.2 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Metre 800 311 2 48 800

3.3 1.14.3 2 x 4 sq.mm. + 1 x 4 sq.mm. earth wire Metre 500 373 1 86 500

3.4 1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire Metre 250 482 1 20 500

3.5 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1078 53 900

3.6 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1454 72 700

4 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR

PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

5 1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

6 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as

7 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. Nos. 2 112 224

8 1.41 Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc.

directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. Nos. 100 259 25 900

9 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket

outlet and 2 nos. 5/6 A modular switch, connections etc. as required.

10 1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper

conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as

11 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A

modular SP MCB, "C" curve including connections, painting etc. as required.

12 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and

5/6 A modular switch, connections etc. as required.

13 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket

outlet and 15/16 A modular switch, connections etc. as required.

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

14 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as

14.5 1.24.6 Telephone socket outlet 10 168 1 680

15 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Each 10 47 470

16 1.27 Supplying and fixing of following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

17 Civil-10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with

its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners.

Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 10 221.13 2 211

18 1.2 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making

good the same in case of recessed conduit as required.

19 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case

of recessed conduit as required.

TOTAL SH-I CARRIED OVER TO SUMMARY 11 97 241

II. LIGHT FITTING & FANS

1 8.1 LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )

Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and

prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz,

Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare

Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till

life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than

the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete

in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year

OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.

Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction

temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

2 8.9 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body

material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency

50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free,

(flicker shouldbe below 5 %), life time (LED, Driver & electricalcircuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /

4000°K / 5700°K /6500°K(As per ANSI Bin), SDCM(Standard DeviationColour Matching) <3, Maximum power consumption should not more than the specified rating and

Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections

with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy

≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder

coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

3 8.6 LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -

5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker

free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per

LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing

on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be

submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED

junction temperature shall not riseabove 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

4 NS-1 Supply, installation, testing & comissioning of 2ft length, 10W LED Mirror luminaire wall mounted delivering minimum system lumen of 1150 lumens & the luminaire shall be

with system efficacy 115 lm/W. The luminaire Housing shall be made of extruded aluminium & the diffuser shall be of PMMA/PC. The operating CCT shall be 4000K with CRI

of ≥80, SDCM<5. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95. LED Life with L70 Criteria

should be 50,000 hours. IP20 protection. The LED Driver shall be easily available in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum Nos. 10 1 355 13 550

surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard.

5 NS-2 Supply, installation, testing & comissioning of decorative wall bracket having canopy arm chrome lamp cup with E27 lamp holder. Dimension: L180XW120XH300mm

6 NS-3 Supply, installastion, testing & commissioning of Chandelier light KCH-CHR-MD160275216A or approved equivalent with minimum 6 Opal glass Chandelier with Chrome

finish LED lamps with min 4W x 6 suspensed from ceiling with full suspension arrangement and complete as required.

7 NS-4 Supply, installastion, testing & commissioning of 10W IP65, IK10 Surface mounted bulkhead LED fixture with pressure die cast alluminium heat sink housing for efficient heat

dissipation in metalic grey finish with PC diffuser and independent smps, high efficiency long life SMD LED mounted on MCPCB with system efficacy of ≥ 100 lm/W used to

enhance the lumen output, powered by integral electronic driver. THD <= 10%, CCT 5700K Nos. 4 1 742 6 968

8 NS-5 Supply, installastion, testing & commissioning of 80W SMD LED Floodlight fixture with System efficacy of 120 lm/W (9600 lumens). Luminaire shall be made up of

LM6/ADC12 Alloy, non-corrosive, pure polyster power coated die cast Aluminium housing with PC lens. The housing should be completely screwless. Lumianire should be of

dimension 282mm x 292mm x 48mm height ± 5mm height and the approximate weight should be within the 2.2Kg ± 0.25Kg. Luminaire should have 60° beam angle for

uniform light distribution. All external hardware must be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic package of wattage of 1W-2W from reputed makes such

as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the

same from manufacturer shall be provided. Maximum LENS dome top temperature shall be less than 95°C at 45°C ambient temperature. Luminaire shall be with IP66 and

IK07 protection. It should be cabable to operating under ambient temperature range of 0°C to +45°C. The LED shall be compliant with LM80-08 standard with L70 life of

50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K, CRI

of Minimum 70 and SDCM < 5. LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 micron to be used for LED Nos. 6 5 149 30 894

mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-300V AC. Driver Efficiency > 85% & 5 KV internal surge protection

with additional 10KV SPD mounted inside the luminaire and firmly fixed to the housing, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10%

should be integral to the luminaire. LED Driver must have short circuit, open circuit, Auto cut-off protection for low and high input voltage. Driver must have 440V input voltage

protection for 8 hours. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a

NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885

9 NS-6 Supply Installation and Commissioning of Flexi Strip 5W/M Flexible LED Strip with high performance LEDs, suitable for mounting in cove for indirect lighting with non- integral

electronic LED driver. High efficiency long life LED package in integral module with lumen efficacy of >75 lm/W. Powered by an integrated driver, SELV Output electronic LED

driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test. Lumen Output of 375lumens/mtr. CRI >80, Color

temperature 4000K, IP20. Life class of 50,000 hrs @ L70B0, Operating Temperature:0 TO +45 DEG.C; Input Supply Voltage Range: 100-300 V, Frequency: 50-60 HZ; 5m meter 250 1 136 2 84 000

10 9.2 Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM

(tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

10.1 9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Nos. 18 2695 48 510

11 NS-7 Supplying, installation, testing and commissioning of 300mm exhaust fan suitable for operation on 230 volts 50 Hz, single phase A.C. supply including wiring the down rod of

suitable with 1.5 sqmm. PVC insulated copper conductor single core FRLS cable, earthing the regulator etc. & as per make & models in enclosed list of approved makes as

required & as per make & models in enclosed list of approved makes as required. Nos 6 2 684 16 105

12 7.1 Supplying, Installation, Testing and commissioning of occupancy sensor powered by intelliscan technology(Occupancy & motion detection) which uses 5.6GHz low

impedence antenna which cancels out the risk of radio interference. It will switch off the lights in a room or area when it is vacated and thus save energy. Sensor should have

Light level optimisation with daylight harvesting and it should have ability to detect breathing & heartbeat of occupants for better funtion. Sensor can be mounted at a ceiling

height of max 3.5mtr with a detection radius of 4m(minor movement detection), 5m(Major movement detection) and 4m(Breathing detection). Its smart daylight sensing Each 10 4896 48 960

technology offers additional saving through daylight override and daylight switching

13 7.2 Supplying, Installation, Testing and commissioning of occupancy sensor powered by intelliscan technology(Occupancy & motion detection) which uses 5.6GHz low

impedence antenna which cancels out the risk of radio interference. It will switch off the lights in a room or area when it is vacated and thus save energy. Sensor should have

Light level optimisation with daylight harvesting and it should have ability to detect breathing & heartbeat of occupants for better funtion. Sensor can be mounted at a ceiling

height of max 3.5mtr with a detection radius of 4m(minor movement detection), 5m(Major movement detection) and 4m(Breathing detection). Its smart daylight sensing

technology offers additional saving through daylight override and daylight switching

EXTERNAL LIGHTING

1.0 NS-8 Supply, Installation, testing & commissioning of 385mm Top Dia & 182mm Height Dark Sky Certified unique spherical cap shape design post top & completely made in India

luminaire. The luminaire’s shall be made of Aluminum top spun cap with die cast heatsink, duly powder coated with gray color pure polyester. The complete luminaire has

IP66 & IK08 protection and it comprises of polycarbonate fresnel lens/street optics lens to achieve Nil up-light and reduced light pollution on driveway as well as footpath. The

LEDs shall have minimum CRI ≥70, CCT-4000K & shall have SDCM≤5. The luminaire shall have wattage 45W as per lux requirement and shall deliver 100 lm/W(efficacy).

Beam angle of the Luminaire shall be asymmetric type to cover driveways. Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 150-300V AC.

The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-

house NABL accerating under ambient temperature range of 0°C to +45°C. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum Each 8 10 610 84 880

current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K, CRI of Minimum 70 and SDCM <

5. LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 micron to be used for LED mounting. LED Driver shall be

silicone potted, Integrated type, Isolated, Constant Current with rang

2.0 NS-9 Supply, Installation, testing & commissioning of 11W LED Decorative Bollard with System efficacy of 70 lm/W (770 lumens). Luminaire shall be made up of pure polyester

power coated casted Aluminium housing with seamless polycarbonate diffuser and asymetrical photometric distribution, having dimension of 150X70mm with height of

800mm. All external hardware must be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic package from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/

Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be

provided. Luminaire shall be with IP65 and IK10 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current

(Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 4000/5700 K, CRI of Minimum 80 and SDCM <5.

LEDs must be driven at max 70% of the raerating under ambient temperature range of 0°C to +45°C. The LED shall be compliant with LM80-08 standard with L70 life of Each 15 16 779 2 51 685

50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K, CRI

of Minimum 70 and SDCM < 5. LEDs must be driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 micron to be used for LED

mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-300V AC. Driver Efficiency > 85% & 5 KV internal surge protection

with additional 10KV SPD mounted inside the luminaire and firmly fixed to the housing, Power factor greater than 0.95 and total harmonic distort

3.0 NS-10 Design, Supply, Installation, testing & commissioning of IP65, Mono Color (CCT:2700K) Flood Light with driver having minimum lumens output of 600 lumens with system

efficacy of 75 lm/W, die-cast aluminium housing integrated with MC PCB populated with LED and optical lens beam angle (24/36/55 Degree) with Mounting option of Spike.

Luminaire is powder coated with pure polyester with suitable shade. Toughened clear glass is sealed with housing with silicon sealant with supporting clamp to meet IK07

protection. The luminaire shall have declared life of 50,000 burning hours at L70B0 & suitable to operate in input voltage range of 140V to 270V (nominal rated voltage –

240V). The agency have to submit BIS certificate, LM79 report from NABL accredited laboratory and LM80 report issued by LED manufacturer. The installation shall be done Each 10 25 609 2 56 090

as per site condition including necessary cutting, grouting, foundation and hardware etc. as directed by project incharge etc. complete as required. (Tree Up Lighting)

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

4.0 NS-11 Supply, Installation, Testing & Commissioning of 250mm Dia X 90 mm Height 3000K LED Inground light with Non- Integral driver & completely made in India luminaire. The

luminaire’s shall be made of Aluminum die cast housing duly Powder coated. The complete luminaire has IP67 & IK10 protection and it comprises of high purity integrated

poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 36W and shall deliver 1800 lumens. Beam

angle of the Luminaire shall be 60 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to

additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand. Luminaire

manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer

along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on

each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. (Shrub Up Lighting)

5.0 NS-12 Supply, Installation, Testing & Commissioning of 7W wall recessed LED lights for Ramp wall as required. (Building Entry) Each 4 11 870 47 480

6.0 NS-13 Supply, Installation, Testing & Commissioning of 100 mm Dia X 230mm Height, Surface Down Light 4000K with Integral driver & completely made in India luminaire. The

luminaire’s shall be made of Exteruded aluminium powder coated. Optical compartment is sealed with toughened glass using Silicon gasket ensuring IP65 & IK06 protection

and lifelong performance.The LEDs shall have minimum CRI ≥70 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 30W and shall deliver 2400 lumens.

Beam angle of the Luminaire shall be 60 deg. Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 140 - 280V AC. 2 stage Constant current

driver with Inbuilt 3kV surge protection. The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand.

Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire Each 4 13 078 52 312

manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. (Building Entry)

7.0 NS-14 Supply, Installation, Testing & Commissioning of 100 mm Dia X 200mm Height, Surface Down Light 4000K with Integral driver & completely made in India luminaire. The

luminaire’s shall be made of Exteruded aluminium powder coated. Optical compartment is sealed with toughened glass using Silicon gasket ensuring IP65 & IK06 protection

and lifelong performance.The LEDs shall have minimum CRI ≥70 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 15W and shall deliver 1350lumens.

Beam angle of the Luminaire shall be 60 deg. Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 140 - 280V AC. 2 stage Constant current

driver with Inbuilt 3kV surge protection. The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand.

Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire Each 4 9 197 36 788

manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. . (Security Light)

TOTAL SH-II CARRIED OVER TO SUMMARY 2 57 930 15 27 576

III. DISTRIBUTION PANELS

1 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

1.1 2.3.2 8 way, Double door Nos. 2 2773 5 546

2 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper

bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

3 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

3.2 2.10.3 Double pole (used as 25A DP MCB) Nos. 8 696 5 568

4 NS-15 Supplying and fixing of following rating, four pole 415 volts, MCB TPN in the existing MCB DB complete with connection,testing and commissioning etc. as required.

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

5 2.14 Supplying and fixing of following rating double pole (Single phase and neutral) 240 volts, residual current circuit breaker (RCCB), having a current sensivity current 30

miliampere in the existing MCB DB complete with connections, testing & commissioning etc. as required.

6.0 NS-16 FEEDER PILLAR (OUTDOOR TYPE)-

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust, vermin

& weather proof Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital ammeter

with inbuilt ammeter selector switch, digital voltmeter with inbuilt voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, MS Angle

stand for installation, RCC foundation, interconnection, painting complete as per specification & drawing.

EXTERNAL LIGHTING PANEL

1 No. 63 Amp FP Moulded Case Circuit Breaker.

1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.

1 No. 63 Amp digital ammeter with inbuilt selector switch and CT's.

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

100 Amp TPN aluminium busbar.

3 No. 40 Amp DP MCB, 10 KA breaking capacity.

3 Set 24 Hrs TSQ Timer

3 Set 63 Amp, DP Contactor & A/M switch and Push Button.

20 No. 25 Amp SP MCB, 10 KA breaking capacity.

02 No. 40 Amp DP MCB, 10 KA breaking capacity.

01 No. 25 Amp DP MCB, 10 KA breaking capacity.

Panel described as above Each 1 2 07 585 2 07 585

TOTAL SH-III CARRIED OVER TO SUMMARY 46 693 2 07 585

IV. EARTHING, CABLES & CABLE TRAY

1 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and

watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

2 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Meter 20 287 5 740

(LT Cables and Terminations)

4 NS-17 Supplying following 1.1kV grade, heavy duty XLPE insulated PVC Sheathed Aluminum Conductor FRLS type armoured cables suitable for 415V, 50Hz, AC system, with

inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in

BOQ, specifications and schedule, complete etc. as required.

4.1 4 core, 16 sq.mm. (Cu Ar. Cable) Meter 250 1 207 3 01 750

4.2 4 core, 6 sq.mm. (Cu Ar. Cable) Meter 200 537 1 07 400

4.3 2 core, 16 sq.mm. (Cu Ar. Cable) Meter 80 677 54 160

4.4 2 core, 10 sq.mm. (Cu Ar. Cable) Meter 100 475 47 500

4.5 2 core, 6 sq.mm. (Cu Ar. Cable) Meter 150 314 47 100

5 10.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning,

protective covering and refilling the trench etc as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

7 10.8 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

7.1 10.8.1 Upto 35 sq. mm (clamped with cable tie) Meter 430 53 22 790

8 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor

cable of 1.1 kV grade as required.

9 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with

fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering

etc., complete as required.

9.1 15.16.1 63 mm dia (OD-63 mm & ID-51 mm nominal) Meter 150 289 43 350

10 4.6 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than

17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

10.1 4.6.1 100 mm width x 50 mm depth x 1.6 mm thickness Meter 50 754 37 700

10.2 4.6.2 150 mm width x 50 mm depth x 1.6 mm thickness Meter 30 803 24 090

TOTAL SH-IV CARRIED OVER TO SUMMARY 2 37 378 5 57 910

V. DSR 2025 UPS / INVERTER

1.0 Online UPS - Input supply: Single Phase, Output Supply: Single Phase.

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single

Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less

than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for

manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using

Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and

inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-

linear loads. Current total harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required LC filters shall be included in

UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however

UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering

26.1 output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute. Operating temperature 0 to

40 0C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery

over charging, output over current, shortcircuit, battery deep discharge , 10 KV surge. Display for watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low

voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per

standard IEC 62040-1, 2 & 3) . The UPS should be with IGBT Based Inverter Technology, Communication RS232/ RS485/ SNMP port open protocol for BMS integration as

per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and

all required accessories are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location

TOTAL SH-V CARRIED OVER TO SUMMARY 1 68 506

VI. DSR 2025 EV CHARGER

1.0 18.1 Supplying Installation, Testing and Commissioning of EV charging station As per specifications and in Compliance to relevant IS codes etc.

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

1.1 Light EV DC Charger (Mode 4) Power Level 1: Up to 7 kW, Input power supply: 1phase 230 +10% Volt/3phase 415 Volt, Frequency: 50 Hz +/-5%, output supply: 12/24 Volt

DC. Operational temperature range : -25 to 55 0C (outdoor), -5 to 55 0C (Indoor), RH upto 95%, Charging Device as per IS-17017-25, EV-EVSE Communication:IS-17017-

25, one Charge Point Plug/

Socket as per IS-60309 and IS-17017-2, Vehicle Inlet/ Connector As per EV manufacturer, suitable for 2 Wheelers and 4 wheelers. Indoor use: at least IP42; Outdoor use: at

18.1.2 least IP54. Mechanical Strength :protection of the external enclosure against mechanical impact shall be IK08 according to IEC 62262.O/L,S/C protection. Insulation Nos 1 350914 3 50 914

Resistance > 1 M Ω. Cable Length: 7.5 m. RCD having a rated residual operating current not exceeding 30 mA; Separate RCD for multiple outputs. Telecommunication port

of the EV supply equipment according to IS 13252 (Part 1) : 2010. OCPP(Open charge point protocol) 1.6J upgradable to ocpp 2.0. Device Should follow 17017 series of IS

codes in general and the installation of the system shall comply with relevant IS Codes.

TOTAL SH-VI CARRIED OVER TO SUMMARY 3 50 914

VII SOLAR SYSTEM

Solar Photovoltaic Power Plant:

Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC,MNRE guidelines, the

Central Electricity Authority Regulations and CPWD Specifications as amended upto date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility,

necessarycontrol, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System,

Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required. a) High Energy Efficiency Solar Photovoltaic Module of

capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion

efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be

warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to

operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency

identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique

Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage

range and 415 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less

than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-

inmeter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation

including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode.

It must be provided with grid\ islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over

Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid

synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3

phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface

RS 485 / RS 232. c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of

zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to

sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the

applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts.

The suitable arrangements for maintenance and cleaning shall be provided. d) Real time online web interfaced Data Monitoring System complete with accessories for various

parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled,

Time Idle, Power produced and other parameters as per standard practices. e) Array junction box & Main junction box with IP 65 protection and termination arrangement for KWp 25 54280 13 57 000

incoming and outgoing cable along with glands, lugs and otheraccessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast

aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Metal Oxide Varistors(MOVs) (semiconductor diode with resistant applied

voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. f) Lightning, surge voltage protection,

earthing protection and grid islanding. g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored

power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as

required. h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears,

connection-interconnection, etc. as required.

TOTAL SH-VII CARRIED OVER TO SUMMARY 13 57 000

VIII CCTV SYSTEM

1.0 40.5 Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome Camera having specs as per DSR item No. 40.5

1.1 40.5.1 5MP/6MP IP IR 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) Dome Camera. Nos. 6 12800 76 800

2.0 40.6 Supplying Installation Testing and Commissioning of 5MP/6 MP IP IR Bullet Camera having specs as per DSR item No. 40.6

2.1 40.6.2 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens outdoor Bullet Camera. Nos. 8 26993 2 15 944

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

3.0 40.10 Supplying Installation Testing and Commissioning of 16CH Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications as

per DSR items No. 40.10

3.1 40.10.2 16 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16, 2nd screen: 1/4/8/9/16 Nos. 1 12799 12 799

4.0 40.12 Hard Disk Drive: Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with

upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM,

UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

5.0 39.3 Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as per DSR items No.

5.1 39.3.1 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min. Nos. 1 125393 1 25 393

6.0 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting

Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit,

Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws

packet of 20 x 1 number, etc. complete as required.

7.0 NS-18 SITC of 42" LED Display unit as per site requirement for viewing of Cameras Each 1 43 700 43 700

8 39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted

Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal

with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required.

9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case

of recessed conduit as required.

TOTAL SH-VIII CARRIED OVER TO SUMMARY 5 42 313 43 700

IX TV / TELEPHONE & LAN- WIFI SYSTEM

1 1.18 Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/

PVC conduit as required.

2.0 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in

the existing surface/ recessed steel/ PVC conduit as required. Mtrs 200 54 10 800

3.0 1.24.7 Supplying and fixing following modular TV antena socket on the modular plate & switch box including connections as required. Each 10 168 1 680

4.0 NS-19 Supply, erection, testing and commissioning of 6 way splitter of aluminium die cast body in suitable size of G.I. Box. Each 1 1 177 1 177

5.0 39.3 Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as per DSR items No.

5.1 39.3.1 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min. Nos. 1 125393 1 25 393

6 39.4 Supplying, installation, Testing and commissioning of following capacity 24 port Layer 3 Network Switch having features and specifications etc. as per DSR item No. 39.4

7 39.6 Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required.

7.1 39.6.1 1G SFP Single Mode/Multi Mode Nos. 1 4211 4 211

Digitally signed by MAHABIR

S. RATE AMOUNT

DSR 2025 ITEM DESCRIPTION UNIT QUANTITY

NO. DSR NON DSR DSR NON DSR

8 39.7 Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for Low Density use having features and specifications etc. as per DSR item No. 39.7

9 39.10 Supplying, Installation, Testing and commissioning of indoor Wireless Controller having features and specifications etc.as per DSR item No. 39.10 Nos. 1 113228 1 13 228

10 39.13 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D

etc. complete as required.

10.1 39.13.1 Copper Patch Cords of length 1m (3ft) Nos. 5 173 865

10.2 39.13.2 Copper Patch Cords of length 3m (10ft) Nos. 10 405 4 050

11.0 39.18 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum, Horizontal

(solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color

coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance:

ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested

and verified by UL/ ETL etc. complete as required.

12.0 39.15 Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification

program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. Nos. 10 302 3 020

complete as required.

13.0 39.16 Supplying, Installation, Testing and commissioning of RJ45 Connector for CAT 6/6A Cables. RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors. Housing:

PC, UL94V-2, transparent color, Use for 24- 26 AWG stranded wires etc. complete as required.

14.0 39.21 Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations,

Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered

fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be

Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required.

15.0 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting

Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit,

Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws

packet of 20 x 1 number, etc. complete as required.

16 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case

of recessed conduit as required.

TOTAL SH-IX CARRIED OVER TO SUMMARY 7 19 993 1 177

Digitally signed by MAHABIR

PROJECT:- Upgradation of Bungalow No. 1, Janpath Road, New Delhi - 110001

COST SUMMERY OF HVAC

S.NO DESCRIPTION DSR NS

Digitally signed by MAHABIR

Project: Upgradation of Bungalow No. 1, Janpath Road, New Delhi - 110001

S. No. DSR 2025 DESCRIPTION OF ITEM UNIT QUANTITY DSR Rate NSR Rate DSR Amount NSR Amount

HI - WALL SPLIT SYSTEMS

1.0 32.2 Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete

with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed

cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr

(IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working

between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling,

dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to

deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty

both compressor

and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control

IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS

11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023.

The system shall be able to operate up to 50 0C (out door ambient temperature). Inverter Type - Cooling only

1.1 32.2.3 1.5 TR with 5 Star BEE Rating Nos 4 43539 174156

1.2 32.2.4 2.0 TR with 5 Star BEE Rating Nos 10 57396 573960

Air Cooled VRV / VRF SYSTEM

2.0 31.1 OUTDOOR UNIT

Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed

inverter type twin Rotary/Scroll Compressor(s), minimum two compressors (with individual separate PCB) for

above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A

Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better

efficiency condenser fan shall be capable to operate at

different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS

18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The

system shall be able to deliver 100% of the rated capacity upto 39 0C. The unit shall be suitable to work on

400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of

the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent

water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of

degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio

(ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as

below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity

<40 kWr ISEER 5.4, Capacity > 40 and <70 ISEER 5.5, Capacity > 70 ISEER 5.6 for ECSBC Building) For

Cooling or Heating or Both

Digitally signed by MAHABIR

S. No. DSR 2025 DESCRIPTION OF ITEM UNIT QUANTITY DSR Rate NSR Rate DSR Amount NSR Amount

3.0 31.4 INDOOR UNIT Supplying, Installation, Testing and Commissioning of following minimum capacity 4 way

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with

low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation,

Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as

required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The

system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor

unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

4.0 31.8 VRV Hi Wall Unit - Supplying, Installation, Testing and Commissioning of following minimum capacity High wall

type Indoor unit equipped with and comfort washable synthetic media prefilter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve,

outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ±

10%, 50 Hz, single phase AC supply, complete as required. The Indoor units must shut down upon receiving a

singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room

requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19

0C WB temperature. (Make will be same as of Outdoor)

5.0 31.13 Y-joints For Indoor Unit

Supply Installation Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same

OEM make as of ODUs and IDUs

5.1 31.13.1 Indoor Units Each 6 4535 27210

5.2 31.13.2 Outdoor Multi Joint Each 4 8098 32392

6.0 31.14 Insulated Refrigerant Piping for VRV / VRF System

Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with

suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-

O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick

insulationas given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

6.1 31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 50 256 12800

6.2 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 50 346 17300

6.3 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 100 487 48700

6.4 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 50 615 30750

Digitally signed by MAHABIR

S. No. DSR 2025 DESCRIPTION OF ITEM UNIT QUANTITY DSR Rate NSR Rate DSR Amount NSR Amount

6.5 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 100 739 73900

6.6 31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 50 904 45200

7.0 NS Condensate Drain Piping With Nitrile Rubber Insulation

Supply, installation, testing and commissioning of UPVC condensate drain water piping of density 10 Kg/m³

complete with fittings like elbows, tees, reducers, bends, flanges, supports & duly insulated with "O" class

Closed Cell Elastomeric Nitrile Rubber of specified pipe section of specified thickness etc. as required and of

following sizes.

7.1 25 mm dia pipe, 13 mm Insulation RMT 250 221 55250

Total HVAC Works 1652895 55250

Digitally signed by MAHABIR

PROJECT :- Upgradation of Bungalow No. 1, Janpath Road, New Delhi - 110001

Schedule of Quantities: Audio Visual System

DSR/ AMOUNT (RS.)

S NO DESCRIPTION Unit QTY RATE

MR DSR (INR) NON-DSR (INR)

SITC of 75" 4k, UHD Professional LED Display with 400 NITS, 24*7 ,Built in SOC/ Media Player with Quad Core

Processor, Built in Open Platform Android 11, With Built in Bluetooth, Wi-Fi/ LAN enabled, 2X HDMI, Audio Input

Audio Output, Built in Speaker(10W x 2) ;Including mounting bracket, Built-in Chromecast , HDMI Arc, The built-in

SOC is powered by Google's Android Platform, HDMI-CEC device linking supported, 2 USB(2.0), 3*HDMI(2.0

1 MR Side), Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4 GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Nos 2 2,38,413.86 4,76,827.72

Processer, 2 GB RAM, 20 W built speakers, and with 3 years on Site Warranty

SITC of 65" 4k, UHD Professional LED Display with 400 NITS, 24*7 ,Built in SOC/ Media Player with Quad Core

Processor, Built in Open Platform Android 11, With Built in Bluetooth, Wi-Fi/ LAN enabled, 2X HDMI, Audio Input

Audio Output, Built in Speaker(10W x 2) ;Including mounting bracket, Built-in Chromecast , HDMI Arc, The built-in

SOC is powered by Google's Android Platform, HDMI-CEC device linking supported, 2 USB(2.0), 3*HDMI(2.0 1,25,613.86 1,25,613.86

Side), Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4 GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz

Processer, 2 GB RAM, 20 W built speakers, and with 3 years on Site Warranty

SITC of 55" 4k, UHD Professional LED Display with 400 NITS, 24*7 ,Built in SOC/ Media Player with Quad Core

Processor, Built in Open Platform Android 11, With Built in Bluetooth, Wi-Fi/ LAN enabled, 2X HDMI, Audio Input

Audio Output, Built in Speaker(10W x 2) ;Including mounting bracket, Built-in Chromecast , HDMI Arc, The built-in

SOC is powered by Google's Android Platform, HDMI-CEC device linking supported, 2 USB(2.0), 3*HDMI(2.0

Side), Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4 GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz

Processer, 2 GB RAM, 20 W built speakers and with 3 years on Site Warranty

SITC of Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-format cables, 2 Universal Power

4 MR Socket , 1 HDMI, 1 USB-C for Data Transfer, 2 Data/LAN/ Telephone etc., made of aluminium etc all complete in Nos 2 19,896.04 39,792.08

SITC of All in One Conference Unit, Camera Sensor 1/2.5″, CMOS, Effective Pixel: 8.0M, 4 x MEMS mic array,

AEC | ANS | AGC 180° Pickup Angle pickup Range: 5-8m (16-26ft) A.I. camera with smart backlighting, auto-

framing, speaker & presenter tracking, Inputs / Outputs 1x USB-C Input with Alt-Mode, 1x HDMI Input, 1x HDMI

Output etc all complete

6 MR SITC of 5 Meter Premium High Speed HDMI Cable Nos 2 5,500.00 11,000.00

7 MR SITC of 10 Meter Premium High Speed HDMI Cable Nos 2 11,200.00 22,400.00

8 MR SITC of 15 Meter Premium High Speed HDMI Cable Nos 2 17,500.00 35,000.00

4 Digitally signed by MAHABIR

PROJECT :- Upgradation of Bungalow No. 1, Janpath Road, New Delhi - 110001

SCHEDULE OF QUANTITIES: EPABX (TELEPHONE & INTERCOM SYSTEM)

DSR/ AMOUNT (RS.)

S NO DESCRIPTION Unit QTY RATE

MR DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of EPABX with 1 PRI and 30

analog extension expandable till 50 extensions capable of being PCM/TDM

with voice mail, auto apending , call forwarding etc facilities with operator

1 MR console complete in all respect as per the directions of engineer in charge Nos 1 7,61,100.00 7,61,100.00

and all complete with License & OEM Support of 3 years

SITC of Analog type Master /KTS Phones complete with handset having

features like digital display, redial, contact memory, multiple direct/landline

2 MR support (min. 6 keys), call hold /transfer & pause, electronic volume control, Nos 2 6,435.64 12,871.29

handsfree speaker phone etc. including telephone/power cords etc. as

SITC of Analog type Phones complete with handset having features like

digital display, last number redial, electronic volume control, handsfree

3 MR speaker phone etc. including telephone/power cords etc. as required. Nos 8 1,493.07 11,944.55

5 Digitally signed by MAHABIR