Repairing White washing Snowcem Distempering and Painting in Superintending Engineer residence in Canal Colony Jind

Amount

Scraping of old distempering and old bond as per HSR item No.16.65

Preparing for plaster surface for oil bound Distempering i/c Sand papering the surface , applying One coat of linseed oil and filling with approved quantity Consisting of white lead ,linseed oil ,varnish & chalk mitti Including finishing the surface to the required finish Complete as per HSR item No. 16.52

Distempring with washable oil bound Distemper two coats on old distempered work as Per HSR item No.16.60

Distempring with dry distemper two coats On old distempered work (when shade is changed) as Per HSR item No.16.56

Finishing walls with exterior decorative cement Based paints , such as snowcem Robbiacem etc. on old Work one coat to give an even shade as per HSR item No.16.62

Painting two coats with ready mixed paint In all shade on old wood work to give an even shade Including rubbing down old paint as per HSR item No. 16.6

Painting one coat with ready mixed paint For metallic surface in all shade on old steel or iron Work as per HSR item No 16.11

White washing two coats(Residence & Boundary wall) as per HSR item No.16.47

Cement concrete 1:3:6 with stone aggregate 20 mm nominal size in foundation & plinth as per HSR item No. 10.40

First class brick work laid in cement sand Mortar 1:4 in foundation & Plinth as per HSR item No.11.40

Cement concrete 1:1.5:3 with stone Aggregate 20 mm nominal size reinforced concrete Work in slab with inclination not exceeding 25 degree With horizontal , excluding steel reinforcement but Including centering & shuttering laid in position Complete in all respect as per HSR item No.10.82+ 10.95

Providing & fixing 100 mm PVC rainwater pipe 6 kg pressure of ISI marks in cement mortar during Masonry work (a) 100 mm dia PVC pipe 6kg pressure Make supreme finolex , prince as per HSR item No. 13.89

Providing & fixing PVC Bend ISI Mark (b) 100 mm dia PVC Bend (Make supreme , finolex , prince) as per HSR item No.13.90(a)

Providing & fixing vitrified tiles of size 600*600 mm of approved make in flooring laid in Any pattern as specified over base of 20mm thick Cement coarse sand mortar 1:3 & jointed with White cement slurry mixed with pigment to match The shade of tile as per HSR item No.14.89

Providing and fixing 1st quality ceramic Glazed wall tile confirming to IS 15622 (thickness To be specified by the manufacturer) of approved Make in all colors , shades , except burgundy bottle Green ,black of any size as approved by Engineer-In -Charge in skirting , risers , of steps & dados over 12 Mm thick bed of cement mortar 1:3 coarse & joined With gray cement slurry including pointing in white cement mixed with pigment of watching shades complete. Digital print tiles of size 300*450 mm of reputed manufacturer like – RAK,NITCO,KAJARIA Shall be used as per HSR item No. 14.92(b)

12 mm thick Plaster 1:5 (HSR 15.6)

Applying pink primer or aluminium Priming coat on wood work including preparing Of surface knotting and stopping etc.(HSR item No.16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades (HSR item No.16.3)

Factory manufactured Panelled door Or glazed windows shutters of commercial hard Wood such as Hollock Champ only (non coniferous Timber other teak confirming to IS specification No 1003, kiln seasoned ) with 100 mm wide vertical Styles ,150 mm wide lock rail ,200 mm wide bottom Rail and 100 mm wide other rails with panels of 15 Mm thick tongued and grooved of commercial hard Wood and including cost of iron hinges , screw chock /cleats stops rail etc. complete in position excluding The cost of any fittings other than specified above But including labour for fixing the same in position(a) 30mm thick HSR item No.17.90(b) – 17.18- Note

Factory manufactured solid flush door Shutter with black board core as per IS No.1659- 1969 bonded with water proof type phenol formaldehyde synthetic resin hot pressed confirming to IS 2202 part 1 & 2 , fixed in position including iron hinges, screws , chocks / cleats & stops etc. excluding the cost of any fitting other than specified above but including labour for fixing the same in position duro, green , kitply 25 mm thick only HSR item No. 17.93(a) (i) note under 17.18

Factory manufactured wire gauge door & Windows shutters of commercial hard wood such as hollock & champ only (non – coniferous timber other teak comfirming to IS specification no 1003 kiln seasoned) with 100 mm vide vertical styles , 150mm wide lock rail , 20mm wide bottom rail , and wire gauge of 140G or 120G designation including cost of iron hinges screws chock/cleats stop rail etc. completed fixed in position excluding the cost of any fitting other than specified above but including labour for fixing the same in position (style & rail of windows shutter shall be 75 mm wide (HSR 17.92(-) 17.18 NOTE)

Chowkhat of commercial hard wood such As hillock , champ ,chikrassy and chaplash etc. (non -conferous timber other than teak confirming to IS Specification no 1003 kiln seasoned) of doors and Windows including iron hod fasts etc. complete fixed In position (HSR item No.17.12)

Fe 500 EQR TMT Steel bar for rcc work where Not included in the complete rate of rcc including Bending , binding & placing in the position complete HSR item 18.22

Providing & fixing 150mm hasps and staples With necessary screws etc. complete aluminium (powder coated fitting will be supplied by the dept. Instead of aluminium fitting) HSR item 17.78(b

Providing and fixing sliding bolt with nuts & Screws etc. complete (b) aluminium size 250mm * 16 mm HSR item no17.83(b)

26. PVC insulated wiring in recessed conduit 1.5 sq mm PVC aluminium conductorable in 1.6 mm thick conduit Pipe HSR 31.1(1)a.

(i)Fan point medium

(b) light pint short

(c ) Mediam

(d) Bell point long

(e) 3 pin 5 amp plug short

(f) 3 pin 5 amp ply point mediam

Supply & eraction of main switch BDB3 with Rag bolt on wall HSR 31.12(a)

Supply and eraction of PVC unshealthed Copper conductor cable single core 1100 volt grade In pipe of suitable size excluding cost & erection of Pipes HSR 31.10(v)

Providing & fixing iron grill to all windows Wrought iron & mild steel HSR 18.12

Providing & fixing fan hooks 80cm long HSR 18.38

Lowering salt glazed pipe into trenches 100 mm dia HSR 29.38

Joining fixing salt glazed SW pipes & special In trenches C.S mortar HSR 29.39

35. Labour for jointing ,fixing & testing GI pipes HSR28.18

(i) 20 mm Dia

(ii) 15 mm Dia

Providing & fixing ordinary lavatory suits Size 450*300mm with one no. trap HSR 30.41

Providing & fixing shop dish with CP brass Screw & complete in all respective brass shop dish Small HSR 30.70

Providing & fixing in position 15mm dia CP brass bib cock long body HSR 30.75

Providing & fixing in position 15 mm dia CP brass stop cock long body HSR 30.76

Providing & fixing 20mm dia gate valve HSR 30.110(b)

Providing & fixing best Indian make European Type WC Suit HSR 30.6

Providing & fixing best Indian make towel rail 600mm long HSR30.68(ii)

Providing & fixing bevelled edge 5.5mm Thick with asbestos sheet mirror 550*400 HSR 30.7