8122/SAR-06/2022-23

Amount

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint (1st Quality) complete all as specified & directed by Engr-in-Charge.

M&L for preparation of old painted steel, galvanised sheet and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint (1st Quality) in Camouflague pattern or plain or pattern as decided by Engr-in-Charge. Note : The rate quoted by tenderer is deemed to included in item for painting any type of Rolling shutters and any type of Hangers including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M&L preparation old steel, galvanised sheet and iron Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint (1st Quality) complete all as specified & directed by Engr-in-Charge.

M&L preparation of old PAINTING BRICK, STONE, CONCRETE, ASBESTOS CEMENT SHEET OR PLASTER SURFACES Surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of exterior emulsion paint (1st Quality) in Camouflague pattern or plain pattern all as specified and directed by Engr-in-Charge.

M&L preparation of old decorated surfaces of walls, Roofs, plastered including cornices, pilasters etc and applying one coats of white wash complete all as specified & directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed by Engr-in-Charge.

M&L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, roofs,fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified & directed by Engr-in-Charge.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,roofs, fixed with self tapping screws or L-type or J-type or cranked hook bolts as specified complete all as specified and directed by Engr-in-Charge.

M&L 6mm thick asbestos cement two piece adjustable plain wing ridge fixed with coach screws and washers or L-type or J-type or cranked hook bolts complete all as specified & directed by Engr-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc,fixed with coach screws and washers or L-type or J-type or cranked hook bolts complete all as specified & directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed by Engr-in-Charge.

M&L for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers or L-type or J-type or cranked hook bolts in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

M&L for 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified & directed by Engr-in-Charge.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified & directed by Engr-in-Charge.

M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint (1st Quality) over a coat of zinc chromic primer in Camouflague pattern or plain or pattern as decided by Engr-in-Charge.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified & directed by Engr-in-Charge.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C1 (using 20 mm gradded stone agg )as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapets copings, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified & directed by Engr-in-Charge.

M&L preparation of new plastered surfaces of walls, Roofs, plastered including cornices, pilasters etc and applying two coats of white wash complete all as specified & directed by Engr-in-Charge.

RAJAN TRADERS

DHIMAN ENGINEERS & BUILDERS

NAVEEN KUMAR TYAGI

SINGH CONSTRUCTION CO.

PANWAR CONSTRUCTIONS

RADHA ENTERPRISES