TN_13_1

Amount

(A) Construction of District Centre (Second Floor): Supplying, fittingand and fixing in position reinforcement bars conforming to relevent I.S Code for R.C.C work/ R.B.walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placingin position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level) a) From Primary Producer: TATA/Sail/Esser Steel/Jindal Steel/Shyam Steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar.

3.2.1.1 Columns, Pillars, Posts and Strut of square/ rectangular/ polygonal in plan or any shape like Tee/ L etc. having plane vertical face.

3.2.1.2 Sides and soffits of beams, beam haunchings, centilever girders, bressumers, lintels and horizontals tiles. (a) For depth not exceeding 1.0M

3.2.1.3 Flat surfaces such as soffits of suspended floors, roofs, landing, centilever slabes, chajjas, balconies and the like. (a) Floors etc. upto 200mm in

3.2.1.5 Sloping of battering surfaces such as slopped slabes etc. including folded plates (a) Where inclination to horizontal plane does not exceed 300 requiring shuttering only on the underside.

Providing and laying plain/reinforeced cement concrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessery, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid seperately) i) Using mixture machine B) In super structure from plinth level upto 1st floor level ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) With out admixture, plasticiser (b) M20 grade concrete ro prop.1:1.5:3

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated out of M.S black tubes conforming to relevant I.S code, as per approved desing and drawings including providing M.S cleats, base plates, bolts and nuts and one coat of red oxide Zinc chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceilling joist as per design and drawing as directed. (b) Using other ISI marked approved circular hollow section.

Providing bare Galvalume sheet roofing at all levels including fitting and fixing self drilling, self tapping screws complete. ( Roof trusses, purlins etc to be measured and paid separetely.) TATA blue scope/ dynaroof/ durakolor/ wonder roof or equivalent as directed by the department. (iii) 0.50mm thick

Proving bare galvalume sheet roofing accessories( Ridges/ valley/ gutter/ flashing) at all levels including fitting and fixing self drilling self tapping screws complete. TATA blue scope/Dynaroof/ Durakolor/ Wonder roof or equivalent as directed by the department. (iv) 0.60mm thick

Providing and fixing, in postion suspended false ceiling using E-grid (exposed ceiling suspension 2430 system) of grids size 600mmx 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6m thick high pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862, to be placed in a grid of G.I. svstem duly suspended with 4mm/6mm dia G.1/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for Iight fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mmx600mm/ 1200mmx 600mm grid, all complete as per the drawing and directions of engineer in charge. before installing it on the grid A) Standard ceilings of everest make or equivalent as directed by the department. (ii) Using 6mm thick FC Board.

112mm thick 1st class brick brick nogged wall in cement mortar including racking out joints and curing complet a directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and wil be measured and paid separatetly) A) 112mm Thick brick wall (a) In cement mortar in proporation 1:4 (1 cement : 4 sand)

Supplying, fitting and fixing sound soak NSS Cord ( FSS Cord) wrapped acoustical wall panel system of anutona acoustic LTD including all fixtures and fittings. d) Armstrong wood works acoustical wall panelling.

Cement plaster skirting with cement morter in prop. 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. A) 15mm thick

Providing , fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately) a) Side hung and Top hung windows and ventilators iv) 5mm clear glass

Providing , fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately) b) Fixed windows and ventilators iv) 5mm clear glass

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodized aluminium frame made of 100mmx45mmx2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x45mmx 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. iv) Prelaminated Board

Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to The columns /stiffeners/ walls with necessary holdfast/sleeves etc. as specified and directed at all levels.

Providing, fitting and fixing 24mm x 29mm thick polymer reinforced moulded PVC door shutters fixed to The chowkhat with necessary hinges, screws, bolts etc. as specified and directed at all levels. ( Doors fixtures and fittings to be measured and paid separately. b) 29mm thick.

Providing and fixing 12mm thick and 150mm wide pelmet with 25mm dire wooden curtain rod and bracket including fixing with 15mmx3mm M.S flat 100mm long plugs complete. E) Extra for providing and fixing brass curtain rail with rollers, stoppers and brakets in pelmet instead of wooden curtain roads 25mm

Providing, fitting and fixing M.S grill of required pattern for windows/clerestory windows opening with M.S flats at required spacing in frame all round, square or round M.S bars with round headed bolts and nuts or screws. I. Plain Grill C) Fixed to Brickwork/PCC/RCC

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. Of size to 13mm to 32mm including dewatering if necessary, and curing etc. complete. A) 35mm thick.

Vitrified Tiles A) On floor Providing vitrified floor tiles of approved quality of specified size shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement morter in prop. 1:3 ( 1cement : 3 Coarse sand) including cutting where necessary finished with flush pointing with fix - A - tile ( Choksei/ sika/ pedelite/ rouf)/ white cement slurry mixed with approved pigment to match shade of tiles mixed with approved pigment to match to shade of the tiles, comlete at all levels as specified and directed. (colored pigment should be in conformity with color of tiles and as approved and directed by the department). b) Executive range Somany/Orient/Nitco/Vita/Marbito/Make i) Of Size 800mm x 800mm and above.

B) ON WALLS: Proving polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10mm thick in prop. 1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (choksey/sika/pedelite/Rouf)/white cement slurry mixed with approved pigment to the match shade of tiles complete atall levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mm x 450mm and above.

15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 (1 cement: 4 Sand)

Providing surface preparation for walls, celling, etc. using average 1.50mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and plaster of paris paste making the surface even and smooth complete at all levels as specified and directed.

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls /and ceilings both internal and external after removing all the loosely adhering material from the wall/ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Wall painting (two coats) with Plastic emulsion paint of approve bran an manufacture (Asian pain / Berger paint/ ICI paint/ J & N paint/Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter (and sand papered smooth) a) Plastic Emulsion paint approved brand and manufacture (Asian paint/Berger paint/ici paint/J&N paint/Nerolac).

Applying one self- priming coat of acrylic emulsion paint of approved brand, thinning by adding water as per the specification of manufacturer over freshly plastered wall surface after throughly brooming the surfaces free mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.

Finishing wall with two coats of acrylic emulsion exterior paint of approved brand of required shade, thinning by adding water as per specification of manufacturer after throughly brooming the surfaces to removed all dirt and remains of loose powdered materials as specified and directed by the department. c) Asian paint.

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand papers. a) With ready mixed red-lead oxide primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and the other foreign matter. (i) Surface over 100mm in width or girth. b) High gloss (Asian paint/Berger paint/Berger paint/ICI paint/J &N paint/Nerolac).

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and inciuding preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter , sand papering and knotting. A) With ready mixed paint, Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i) Surface over 100mm in width or girth. b) High gloss (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Providing, fixing, testing & commissioning of single headed gun metal ISI marked oblique pattern Hydrantlanding valve with 80mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290- : 19833 (Type-'A') and specifications complete as reequired. (MAKE:ESSEL/WINCO/NEWAGE)

Providing and fixing ing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized (payment for wooden bead shall be made separately) (2) Area of glas panes exceeding 0.15m2 but not exceeding 0.52m2 (b) 4.00m thick.

(i) Sanitary Installation and Water Supply Works: Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead , CP brass hinges and rubber buffers , Cl/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Urinal Closet S Trap (cat. No.C0271) (Anglo Indian) (Inclusive of seat cover)

Supplying fiting and fixing PVC flushing cistern with all internal fitting with Cl brackets including fitting and fixing standard size CP flush pipe union clamps etc. complete as directed and specified ( pipes will be measured separately) (i) Parryware make a) White (i) Economy Single Flush (Cat. No.C8090/C8055)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. a) Parryware Make (a) White (ii) Aquaseal (Cat. No.C0508)

Basin ( Without Pedestal) a) Parryware Make (a) White (ii) Star Basin 550 x 400 (Cat. No.C0450)

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing fitting and fixing recessed soap tray /soapdish complete as directed and specified. A) Parryrae make (i) Recess SP & SG dish (Cat. No.C9935)

Providing, Fitting And fixing CP towel rail complete as directed and specified. (c) Parryware make (Cat. No.C9948)

Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified (pipes will be measured and paid separately) (b) Apex/Kiran/Priya/Star/Rimzim/Bugle shower with arm

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. A) Exposed or in trenches SUPREME/PRINCE/SFMC BRAND or other equvalent approved brand (high pressure pipe Such-40) Exposed or in trenches d) 25mm dia.

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. A) Exposed or in trenches SUPREME/PRINCE/SFMC BRAND or other equvalent approved brand (high pressure pipe Such-40) Exposed or in trenches e) 20mm dia. (ii) Using other ISI marked approved brand.

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. A) Exposed or in trenches SUPREME/PRINCE/SFMC BRAND or other equvalent approved brand (high pressure pipe Such-40) Exposed or in trenches f) 15mm dia. (ii) Using other ISI marked approved brand.

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (I) Essco make (Delux/Sumthing spl.Tropical) (a) Bib cock short body

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) (i) Brass stop cock heavy of sant make (i) 15mm dia.

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) (i) Brass stop cock heavy of sant make (ii) 20mm dia.

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) (i) Brass stop cock heavy of sant make (iii) 25mm dia.

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (ii) Jaquare make (a) Continental

Supplying fitting and fixing Chrome Plated (C.P.) flush cock of approved brand as directed and specified(G.I. & C.P pipes will be measured and paid separately) (i) Agmeco brand a) Flush cock Economy Cat No.00506

Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. (ii) Agmeco brand a) wall mixer non telephonic Cat No.00211

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings (Using uPVC high pressure pipe) vill) 65mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings (Using uPVC high pressure pipe) x) 110mm diameter

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. (i) 2000 Lt capacity (a) Sintex make

(ii) Electricals: Wiring for light/fan/call bell point with 3x1.5 sq. mm P.V.C. insulated single core unsheathed (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 voltage (Finolex/RR kable/Nicco/Anchor or equivalant make as approved by the Deptt.) in surface /recessed conduit wirring system with 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit (Berlia/AKG/Precision/Presto Plast/ Polycab/MW or equivalant make as approved by the Deptt.) ceilling rose etc.complete. 2.17.1 Short point up to 3.00 metre length.

Wiring for light/fan/call bell point with 3x1.5 sq. mm P.V.C. insulated single core unsheathed (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 voltage (Finolex/RR kable/Nicco/Anchor or equivalant make as approved by the Deptt.) in surface /recessed conduit wirring system with 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit (Berlia/AKG/Precision/Presto Plast/ Polycab/MW or equivalant make as approved by the Deptt.) ceilling rose etc.complete. 2.17.2 Medium point up to 6.00 metre length.

Wiring for light/fan/call bell point with 3x1.5 sq. mm P.V.C. insulated single core unsheathed (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 voltage (Finolex/RR kable/Nicco/Anchor or equivalant make as approved by the Deptt.) in surface /recessed conduit wirring system with 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit (Berlia/AKG/Precision/Presto Plast/ Polycab/MW or equivalant make as approved by the Deptt.) ceilling rose etc.complete. 2.17.3 Long point up to 10.00 metre length.

Wiring for twin control light point with 1.5 sq mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 with flexibhle bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (finolex /RR Kable /Nicco /Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20 mm dia 2mm thick /heavy rigid PVC IS:9537 part -III Conduit (Berlia/AKG /Precision/ Presto Plast / POLYCAB /MW Or equvilent make as approved by the Deptt.) including 6amp flush type 2 way switch (Anchor penta /Gold medal /Kolor kany .com /Havells or equivalentmake as approved by the Deptt.) GI/ MS switch board (ISI marked ) with phenolic laminated sheet cover , celling rose (Anchor penta /Gold medal /Kolor Kany .Kom /Havells or equivalent make as approved by the Deptt.) etc complete. 2.16.2 Medium point up to 6.00 metre length.

Wiring for twin control light point with 1.5 sq mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 with flexibhle bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (finolex /RR Kable /Nicco /Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20 mm dia 2mm thick /heavy rigid PVC IS:9537 part -III Conduit (Berlia/AKG /Precision/ Presto Plast / POLYCAB /MW Or equvilent make as approved by the Deptt.) including 6amp flush type 2 way switch (Anchor penta /Gold medal /Kolor kany .com /Havells or equivalentmake as approved by the Deptt.) GI/ MS switch board (ISI marked ) with phenolic laminated sheet cover , celling rose (Anchor penta /Gold medal /Kolor Kany .Kom /Havells or equivalent make as approved by the Deptt.) etc complete. 2.16.3 Long point up to 10.00 metre length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq.mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conformimg to IS-694: 1990 with flexible bright annealed electrolytic copper conduct for voltage grade up to 1100 volts (Finolex/RR kabel/Nicco/Anchor or equivalant make as approved by the Deptt.)in surface/recessed 2mm thick/heavy rigid ISI marked IS:9537 PART-III rigid PVC conduit (Berlia/AKG/Presto plast/ Polycab/ MW or equivalant make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. 2.12.2 Medium point up to 6.00m metre Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq.mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conformimg to IS-694: 1990 with flexible bright annealed electrolytic copper conduct for voltage grade up to 1100 volts (Finolex/RR kabel/Nicco/Anchor or equivalant make as approved by the Deptt.)in surface/recessed 2mm thick/heavy rigid ISI marked IS:9537 PART-III rigid PVC conduit (Berlia/AKG/Presto plast/ Polycab/ MW or equivalant make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. 2.12.3 Medium point up to 6.00m metre Length.

Wiring for circuit wiring with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed eltrolytic copper conductor for voltage grade upto 1100 volts (Finolex/RR cable/Nicco/Anchor or equivalant make as approved by the Deptt.) in surface/recessed PVC conduit (Berlia/AKG/Precision/presto plast/polycab/MW or equivalant make as approved by the Deptt.)Wiring system. 2.6.1 With 2 x 1.5 sq.mm cable in 20mm dia 2mm thick/heavy rigid PVC 9537 Part-III conduit

Wiring for circuit wiring with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed eltrolytic copper conductor for voltage grade upto 1100 volts (Finolex/RR cable/Nicco/Anchor or equivalant make as approved by the Deptt.) in surface/recessed PVC conduit (Berlia/AKG/Precision/presto plast/polycab/MW or equivalant make as approved by the Deptt.)Wiring system. 2.6.2 With 3 x 1.5 sq.mm cable in 20mm dia 2mm thick/heavy rigid PVC 9537 Part-III conduit

Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER(ZENSELO),CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER(ZENSELO),CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER(ZENSELO),CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of blank plate single in modular switch system, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER(ZENSELO),CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER(ZENSELO),CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (VIOLA), MK (BLENZE), SCHNEIDER(ZENSELO),CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 6 amp two way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, including making necessary connection as per direction of department.

Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, including making necessary connection as per direction of department.

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolite copper conducter for voltage grade upto 1100volts (Finolex/RR kabel/Nicco/Anchor or equivalant make as approved by the Deptt.) PVC conduit (Berlia/AKG/Precision/Presto Plast/Polycab/MW orequivalant make as approved by the Deptt.) including earth continuity in surface/recessed 20mm. dia. 2mm. thick/heavy ISI marked IS:9537 PART-III rigid PVC conduit wiring system. 2.7.1 With 2 x 2.5 sq.mm + earth continuity with 1 x 1.5 sq.mm in 20mm dia 2mm thick/heavy rigid PVC IS: 9537 Part-III conduit

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolite copper conducter for voltage grade upto 1100volts (Finolex/RR kabel/Nicco/Anchor or equivalant make as approved by the Deptt.) PVC conduit (Berlia/AKG/Precision/Presto Plast/Polycab/MW orequivalant make as approved by the Deptt.) including earth continuity in surface/recessed 20mm. dia. 2mm. thick/heavy ISI marked IS:9537 PART-III rigid PVC conduit wiring system. 2.7.2 With 2 x 4 sq.mm + earth continuity with 1 x 2.5 sq.mm in 20mm dia 2mm thick/heavy rigid PVC IS: 9537 Part-III conduit

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990with flexible bright annealed electrolite copper conducter for voltage grade upto 1100volts (Finolex/RR kabel/Nicco/Anchor or equivalant make as approved by the Deptt.) in surface/recessed 20mm. dia. 2mm. thick/heavy ISI marked IS:9537 PART-III rigid PVC conduit PVC conduit (Berlia/AKG/Precision/Presto Plast/Polycab/MW or equivalant make as approved by the Deptt.) wiring system. 2.9.3 With 4 x 6 sq.mm + earth continuity with 2 x 4 sq.mm cable in 32 mm dia 2mm thick/heavy rigid PVC IS: 9537 Part-III conduit

Supplying including & fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, in surface/recessed system complete as per direction of department. S.B.8.34.1 1-2 module type Metal

Supplying including & fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, in surface/recessed system complete as per direction of department. S.B.8.34.2 3 module type Metal

Supplying including & fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, in surface/recessed system complete as per direction of department. S.B.8.34.3 4-5 module type Metal

Supplying including & fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, in surface/recessed system complete as per direction of department. S.B.8.34.4 6-8 module type Metal

Supplying including & fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, in surface/recessed system complete as per direction of department. S.B.8.34.5 10 module type Metal

Supplying including & fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS(KREST),SCHNEIDER(VIVACE), CRABTREE, in surface/recessed system complete as per direction of department. S.B.8.34.6 12-16 module type Metal

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.1 1 moudle

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.2 2 moudle

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.3 3 moudle

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.4 4 moudle

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.5 5 moudle

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.6 6 moudle

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.7 8 moudle

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB(CHEIRON), KOLORS (KREST),SCHNEIDER(VIVACE), CRABTREE as per direction of department. S.B.8.37.8 10 moudle

Supplying and fixing of 3 plate Ceiling Rose (Anchor Penta PC CHERRY/Gold medal/Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing block including connection as approved by the Deptt. Complete as required.

Supplying and fixing of batten holder (Anchor Penta PC CHERRY/Gold medal/Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt. Required without Lamp

Supply, installation & testing of G.I earth station with perforated 50mm dia and 3.00 mtr. Long heady duty G.I. pipe with necessary 50mm dia G.I fittings such as socket, Tee, elbow, nipple and 65mx50mm G.I reducing socket for funnel including looking arrangement 300mmx300mmx6mm hinged cover C.Iearth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Extra for using salt 5 k and charcoal 64k in pipe Earth station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying, Fabrication, Erection , testing commissioning of vermin and dust proof (IP-43 Protection) totally enclosed cubical type compartmental floor mounting panel board of size 1700mm x 1000mm x 500mm made of 16 SWG(1.66m thick C.R sheet and 300mm x 30mm x 5mm MS Angle having $ no.s legsat the bottom and C.R sheet roofing on the top complete with 2 coats of Red Oxide metal primer and painting with powder coated paint. The panel board is to be erected in 1:3:6 PCC foundation including excavation complete neatly wiring done with the provision for the following electrical accessories. Provision for 250A 4pole 50kA 415v MCCB with rotary handle incoming. Provision for 6 nos TPN MCCB OUTGOING. 0-250 A Moving Iron Ammeter (Digital) 0-500 V Moving Iron Voltmeter (Digital) Ammeter S/S in 3 position Volmeter S/S in 3 position Indicator Lamp (R, Y, B) 2A Solid Lock Fuse 3460.00 250/5 CT coils 3460.00 Control Wiring

Supplying with fiting and fixing sheet steel, phosphatised, powder painted Single door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on the wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.7.1.2 6 way TPN (4+18) SIngle door

Supplying with fitting and fixing single pole 10KA 240/415v 50Hz MCB of the following capacity complete with necessary connection as approved , specified and directed by the deptt. 16.1.2 C-Series 16.1.2.1 6 to 32A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415v 50Hz DP RCCB of the following capacity complete with necessary connection as approved , specified and directed by the deptt. 16.7.2 100/300mA sensitivity DP RCCB 16.7.2.3 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3p MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the deptt. as specified and directed by the deptt. 16.13.1 25KA 415V 50 Hz 3P MCCB 16.13.1.3 40A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3p MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the deptt. as specified and directed by the deptt. 16.13.1 25KA 415V 50 Hz 3P MCCB 16.13.1.4 63A

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3p MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the deptt. as specified and directed by the deptt. 16.14.1 35/36 KA 415V 50 Hz 3P MCCB 16.14.1.1 160A

Supply and fixing of 19 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS:9537 Part-III conduit (Berlia/AKG/Precision/Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supply and fixing of 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS:9537 Part-III conduit (Berlia/AKG/Precision/Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supply and fixing of 32mm dia 2.00mm average wall thickness heavy rigid PVC IS:9537 Part-III conduit (Berlia/AKG/Precision/Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supply and fixing of 38mm dia 2.00mm average wall thickness heavy rigid PVC IS:9537 Part-III conduit (Berlia/AKG/Precision/Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supplying & laying of following size G.I strips drawn on surface from earth electrode to electrical switch gears, machines etc. complete with supply of G.I nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the dptt.

Supplying & laying of following size G.I strips drawn on surface from earth electrode to electrical switch gears, machines etc. complete with supply of G.I nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the dptt.

Supply, fitting & fixing of lighting Final Arrestor made of 25mm dia 300mm long solid G.I tube having 85mm dia single prong at top and 3mm base plate at bottom complete with fitting & fixing with G.I nuts & bolts on roof, RCC slab, top of column etc. as specified & directed by the deptt.

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1KV G solid aluminium conductor upto 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core upto 70 sq mm balance Aluminium strip, Galvanised for cables upto 2x10 sq mm,3x10sq mm, 4x6sq mm balance all galvanised steel strip), extruded PVC type ST2 sheathed, 650/1100V grade as per IS 7908(part 1) 1988 armoured U.G cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth 75cm, refilling, protective brick covering, sand cushioning etc complete handling of surplus spoil, debriset to proper place as specified and directed by the deptt.(Nicro/Havels/RPG/CCI/Polycab/Gloster/Finolex make). 32.1.3 3& 1/2 Core A2XFY 32.1.3.7 150.00 Sq.mm 3 & 1/2 Core armound U.G. cable

Supplying fitting & fixing of (DOWELLS/COMET make) Single copression BRASS GLAND HEAVY DUTY 33.2.12 Single compression Brass Glad Heavy Duty size 2-1/4

Supplying fitting & fixing of (DOWELLS/COMET make) Single copression BRASS GLAND HEAVY DUTY BIS 4579 33.3.4 Copper tube terminal heavy duty bis 4582 Size: 4

Supplying fitting & fixing of (DOWELLS/COMET make) Single copression BRASS GLAND HEAVY DUTY BIS 4579 33.3.5 Copper tube terminal heavy duty BIS 4583 Size: 6

Supplying fitting & fixing of (DOWELLS/COMET make) Single copression BRASS GLAND HEAVY DUTY BIS 4579 33.3.13 Copper terminal heavy duty BIS 4591 size : 95

Supplying fitting & fixing of (DOWELLS/COMET make) Single copression BRASS GLAND HEAVY DUTY BIS 4579 33.3.15 Copper tube terminal heavy duty BIS 4593 size: 150

Supply & laying of following size solid Aluminium conductor upto 10sqmm balance stranded conductor, XLPE insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core upto 70 sqmm balance Aluminium strip,Galvanised for cables upto 2x10sqmm,3x10sqmm,4x6sqmm balance all galvanised steel strip),extruded PVC type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1)1988, LT armoured U.G cable laid in pucca flooring, road crossing,through medium duty G.I pipe(Tata/Nezonemake or equivalant as approved by the Deptt) bend and ocket including excavation and refilling the trench and making good damage done as specified & directed by the deptt.(Nicco/Havels/RPG/Polycab/Gloster/Finolex) 32.5.3 Core-3&1/2 A2XWY A2XFY 32.5.3.7 1500.00 Sq.mm 3&1/2 Core U.G cable in 80mm dia medium duty hot dip galvanished pipe (AKG or equivalent as approved by the deptt.)

Supplying including fitting fixing of following star rated A.C ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable,as approved by the deptt. Etc as required complete and as directed by the department (without regulator).(ORIENT PSPO make/Usha make/Crompton make/Havels/ATC/V Guard make) ECBC 1.1.1 Energy efficient S-star 1200 mm weep ORIENT PSPO/Usha/Crompton/Havells/ATC or equivalent make

Supplying including fitting fixing of following star rated A.C Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection,as approved by the deptt. as required complete and as directed by the department. 27.2.1 Domestic 27.2.1.12 Ventil Air DB 300mm sweep (Havellls make)

Wiring for co-axial jelly flooded (unarmoured) (Finolex/RR kabel/NICCO/Anchor make) cable in existing surface conduit wiring system including connection etc as required 9.3.2 Co-axial jelly flooded Flooded (unarmoured) RG 6 (Copper)

Supplying including fitting fixing of TV SOCKET, MODEL RANGE LEGRAND(ARTEOR), ANCHOR (AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

supplying & fixing of Jaquar or equivalent Philips/wipro LED strip batten lights fittings complete with shade, back plate including connection cable, as approved by the Deptt.s etc. as required 3.24.1 LED Strip Batten 12W

supplying & fixing of call bell (Buzzer) including 6 amp capacity flush type bell push switch including connection as approved by the Deptt.s etc. as required

Supplying with installation testing and commissioning of ceiling concealed ducted split type air conditioner of the following capacity complete with indoor and outdoor unit, copper pipe and electrical connection upto 5m between the room unit and outdoor unit as directed by the department. 12.1.1 1.5 Ton capacity with rotary compressor

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt.(SKYLAND/VEE-DEE/V GUARD/VERTEX /INDO/VENUS make) 37.1.7 4.0 KVA Automatic input 90-280 V out put 200-240 V

ACHINTA NARZARY

LAJIK BRAHMA