Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.5 LAdmitted-Finance | ₹49.5 L | L1 | Admitted-Finance |
| 2 | L2₹59.3 LAdmitted-Finance | ₹59.3 L | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s. Kansal Construction Co. L2 | AMIT ASSOCIATES L1 |
|---|---|---|---|---|---|
| 1.01 | Supplying, fixing & installation of Static Sculpture (Dandelion Motif) (Artwork) with following broad specification:-
Configuration: Triple-stem floral form with spherical seed-head structures
(1) General Description:- A large-scale outdoor sculptural installation representing three stylized dandelion seed heads mounted on curved stems, anchored to a landscaped circular base. The sculpture is designed for permanent outdoor installation in a public or commercial landscape setting. (2) Overall Dimensions (Approx.) (a) Total Height: 2.4–3 m (8–10ft), (b) Maximum Horizontal Spread: ~3 m (15 ft), (c) Individual Seed Head Diameter:, (d) Large: ~1.2-1.4 m (4 - 4.5 ft), (e) Medium: ~0.9–1 m (3-3.5 ft), (f) Small: ~0.6–0.7 m (2-2.5 ft) (3) Materials :- (a)Primary Structure: i) Stainless steel tubing (UNS S30400 or equivalent), ii) Stainless steel wire rods (UNS S30400), (b) Seed Head Elements: i) Laser-cut or welded stainless steel spokes, ii) Starburst seed forms welded or mechanically fastened, (c) Finish: i) Brushed stainless steel, ii) Electro-polished stainless steel, (4) Structural Components:- (a) Stems: i) Diameter: 50–75 mm (2–3 in), ii) Wall thickness: 2–3 mm, iii) Internally reinforced for wind load resistance, (b) Seed Head Framework: i) Central hub with radial tension members, ii) Secondary wire lattice forming spherical geometry, (5) Foundation & Anchoring:- (a) Foundation Type: Reinforced concrete footing, i) Depth: 0.4–0.6 m (1.5–2 ft), frost-line dependent, ii) Diameter: 1.4– 1.6m (4–4.5 ft), (b) Anchorage: i) Embedded anchor bolts (ASTM F1554 Grade 55), ii) Base plates with concealed access panels (6) Load & Environmental Design:- (a) Wind Load Design: ≥ 150 km/h (93 mph) i) Seismic Consideration: Zone-dependent, low mass upper structure, ii) Temperature Range: 0°C to +65°C (7) Fabrication Method:- (a) CNC bending of tubular steel stems, (b) TIG/MIG welding of stainless components, (c) Shop pre-assembly followed by modular site installation, (d) Non-destructive weld inspection (visual + dye penetrant) (8) Installation Requirements:- (a) Crane-assisted installation (5–20 ton capacity), (b) Precision levelling and torque-controlled bolt tightening, (c) Final alignment tolerance: ±25 mm (9) Estimated Weight:- (a) Total Assembly: 200–250 kg (440–550 lb) (10) Compliance & Safety:- (a) Designed per AISC Steel Construction Manual, (b) ADA-compliant clearance around base (c) Rounded edges and anti-climb geometry | 1 | Each | 5,75,000 ₹5.8 L | 5,20,000 ₹5.2 L |
| 1.02 | Supplying, fixing & installation of Contemporary Outdoor Sculpture / Water Feature–Ready Form (Artwork) with following broad specification:-
Form Concept: Organic branching structure with disc-shaped platforms (lotus-inspired)
(1) General Description:- A large-scale freestanding sculptural installation composed of multiple intertwined, fluid-form vertical members branching outward to support shallow circular disc elements. The sculpture is intended for permanent outdoor installation in a landscaped plaza or garden environment and may optionally function as a decorative fountain or reflective water feature. (2) Overall Dimensions (Approx.):- (a) Total Height: 2.4–3 m (8–10ft), (b) Maximum Width: 2.4–3 m (8–10ft) Disc Diameter: 300–450 mm (12-18 in), (c) Number of Discs: 9–12 units (varies by design intent) (3) Materials:- (a) Primary Structure: i) Stainless Steel: AISI 304 (UNS S30400) (AISI 316 optional for coastal or chlorinated environments) (b) Disc Elements: i) Formed stainless steel Balloon structures. (4) Surface Finish:- (a) High-polish mirror finish (Ra ≤ 0.2 μm), mechanically polished, (b) Optional clear anti-fingerprint or hydrophobic nano-coating, (c) Welds ground flush and polished to seamless appearance (5) Structural Components:- (a) Vertical Members: i) Hollow stainless steel sections, ii) Nominal OD: 80–120 mm, iii) Wall thickness: 2.5–3 mm, iv) Internally reinforced at junctions (b) Disc Supports: i) Integrated cantilever arms, ii) Hidden mechanical fastening or full-penetration welds (6) Foundation & Anchorage:- (a) Foundation Type: Reinforced concrete footing i) Depth: 0.4–0.6 m (1.5–2 ft subject to soil conditions) ii) Diameter: 1.4– 1.6m (4–4.5 ft) (b) Anchoring System: i) Stainless steel base plate, ii) Embedded anchor bolts (ASTM F1554 Grade 55 or equivalent) (7) Load & Environmental Design:- (a) Wind Load Resistance: ≥ 140 km/h (87 mph) (b) Live Load on Discs: Decorative only (non-climb rated), (c) Temperature Tolerance: 0°C to +50°C, (d) Corrosion Resistance: Urban outdoor exposure (8) Fabrication Method;- (a) CNC tube bending and 3D form rolling, (b) TIG welding (AWS D1.6 compliant), (c) Multi-stage polishing and passivation, (d) Shop pre-assembly for geometry verification (9) Installation Requirements:- (a) Crane installation (8–15 ton capacity (b) Laser alignment for verticality, (c) Final tolerance: ±25 mm over full height (10) Estimated Weight:- (a) Total Assembly: 200–250 kg (450-550 lb) (11) Safety & Compliance:- (a) Rounded edges and no sharp projections (b) Anti-climb geometry (c) AWS D1.6 (Stainless Steel Welding) | 1 | Each | 6,66,200 ₹6.7 L | 6,00,000 ₹6 L |
| 1.03 | Supplying, fixing & installation of Freestanding Outdoor Sculptural Installation (Artwork) with following broad specification:-
Form: Torus Sculpture
(1) GENERAL DESCRIPTION:- A large-scale circular sculptural form consisting of a thick annular ring with an organically patterned perforated surface. The sculpture is vertically oriented and mounted on a concealed structural base, intended for permanent outdoor installation in landscaped public or private spaces. (2) OVERALL DIMENSIONS (APPROX.):- (a) Overall Height (Diameter): – 2 m, (b) Inner Opening Diameter: 0.3m , (c) Ring Thickness (Radial): 1200 mm , (d) Overall Depth: 250-300mm, (e) Ground Clearance: 50 – 100 mm (concealed support) 3. MATERIAL SPECIFICATION (a)Primary Material- i) Stainless Steel: AISI 304 (UNS S30400 / EN 1.4301) (AISI 316 optional for coastal or high-corrosion environments) (b) Plate Thickness- i) Main body plates: 8–12 mm ii) Internal stiffeners: 6–8 mm (4) SURFACE FINISH:- (a) Finish Type: Fine brushed finish (b) Finish Grade: #240–#320 grit (c) Edges: Fully radiused and deburred (d) Final Treatment: Pickling and passivation (e) Optional: Clear anti-graffiti or nano-protective coating (5) PERFORATION PATTERN:- (a) Pattern Type: Organic cellular / biomorphic (b) Hole Diameter Range: 30 mm – 100 mm, (c) Minimum edge distance between perforations: ≥ 25 mm (d) Cutting Method: CNC laser or water jet cutting (e) All cut edges smoothed and polished (6) STRUCTURAL DESIGN:- (a) Construction: Welded segmented plates forming a hollow torus (b) Designed to resist: Wind speed ≥ 140 km/h (c) Accidental human contact loads (d) Sculpture classified as non-climbable (7) FABRICATION:- (a) CNC cutting of perforated panels, (b) Precision rolling to circular geometry (c) TIG welding (AWS D1.6 compliant) (d) Welds ground flush and blended invisibly (e) Factory trial assembly prior to delivery 8. FOUNDATION & ANCHORAGE:- (a) Base Support- i) Concealed stainless steel pedestal or pin support ii) Support connected to internal structural frame (b) Foundation- i) Reinforced concrete footing, ii) Approx. size: 600 × 600 × 750 mm (subject to soil), (c) Anchors- Stainless steel anchor bolts: M20 (9) INSTALLATION:- (a) Crane-assisted lifting and positioning, (b) Vertical alignment tolerance: ±25 mm (c) All fixings concealed from public view (d) Final cleaning after installation (10) ESTIMATED WEIGHT:- (a) Total Sculpture Weight: 200 – 250 kg (depending on thickness) (11) SAFETY & COMPLIANCE:- (a) Rounded edges, no sharp corners (b) No pinch points or protruding elements (c) Designed in accordance with: (d) AISC / Eurocode 3 (e) AWS D1.6 – Stainless Steel Welding (f) ISO 12944 – Corrosion Protection | 1 | Each | 6,40,200 ₹6.4 L | 5,85,000 ₹5.8 L |
| 1.04 | Fabrication, supply, transportation and installation of custom-designed artistic urban furniture / play-cum-interaction structures made of Mild Steel (MS) sections including straight, inclined, circular and modular elements complete with cutting, bending, welding, grinding, surface preparation, one coat of anti-corrosive epoxy/zinc-rich primer and two coats of outdoor grade PU/epoxy paint in approved colours, fixing over paved surface or concrete base using base plates and anchor bolts/chemical anchors, including all labour, tools, equipment, scaffolding, consumables, taxes and incidentals, complete as per approved design, drawings and directions of Engineer-in-Charge. | 18,000 | kg | 225 ₹40.5 L | 180 ₹32.4 L |
Tender Value
₹2.5 Cr
EMD Value
₹3.3 L
Closing Date
22 Jan 2026, 1:00 pmClosed
Chief Executive Officer
Chief Executive Officer, Sushma Swaraj Marg, Sadar Bazar, Delhi Cantt.
Term Contract for road/garden furniture like ornamental multipurpose benches, Circular table top benches, stool, polymer concrete dustbins, tree surround, children playing equipments and like in Delhi Cantt.
2026_DGDE_746834_1
DCB/8/C-24/2025-26
Open Tender
Civil Works
365 days
Delhi Cantonment Board
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
Chief Executive Officer, Delhi Cantonment Board
₹3.3 L
15 Apr 2026
2 Jan 2026
23 Jan 2026
2 Jan 2026
22 Jan 2026
2 Jan 2026
2 Jan 2026 - 22 Jan 2026
Supplying, fixing & installation of Static Sculpture (Dandelion Motif) (Artwork) with following broad specification:- Configuration: Triple-stem floral form with spherical seed-head structures (1) General Description:- A large-scale outdoor sculptural installation representing three stylized dandelion seed heads mounted on curved stems, anchored to a landscaped circular base. The sculpture is designed for permanent outdoor installation in a public or commercial landscape setting. (2) Overall Dimensions (Approx.) (a) Total Height: 2.4–3 m (8–10ft), (b) Maximum Horizontal Spread: ~3 m (15 ft), (c) Individual Seed Head Diameter:, (d) Large: ~1.2-1.4 m (4 - 4.5 ft), (e) Medium: ~0.9–1 m (3-3.5 ft), (f) Small: ~0.6–0.7 m (2-2.5 ft) (3) Materials :- (a)Primary Structure: i) Stainless steel tubing (UNS S30400 or equivalent), ii) Stainless steel wire rods (UNS S30400), (b) Seed Head Elements: i) Laser-cut or welded stainless steel spokes, ii) Starburst seed forms welded or mechanically fastened, (c) Finish: i) Brushed stainless steel, ii) Electro-polished stainless steel, (4) Structural Components:- (a) Stems: i) Diameter: 50–75 mm (2–3 in), ii) Wall thickness: 2–3 mm, iii) Internally reinforced for wind load resistance, (b) Seed Head Framework: i) Central hub with radial tension members, ii) Secondary wire lattice forming spherical geometry, (5) Foundation & Anchoring:- (a) Foundation Type: Reinforced concrete footing, i) Depth: 0.4–0.6 m (1.5–2 ft), frost-line dependent, ii) Diameter: 1.4– 1.6m (4–4.5 ft), (b) Anchorage: i) Embedded anchor bolts (ASTM F1554 Grade 55), ii) Base plates with concealed access panels (6) Load & Environmental Design:- (a) Wind Load Design: ≥ 150 km/h (93 mph) i) Seismic Consideration: Zone-dependent, low mass upper structure, ii) Temperature Range: 0°C to +65°C (7) Fabrication Method:- (a) CNC bending of tubular steel stems, (b) TIG/MIG welding of stainless components, (c) Shop pre-assembly followed by modular site installation, (d) Non-destructive weld inspection (visual + dye penetrant) (8) Installation Requirements:- (a) Crane-assisted installation (5–20 ton capacity), (b) Precision levelling and torque-controlled bolt tightening, (c) Final alignment tolerance: ±25 mm (9) Estimated Weight:- (a) Total Assembly: 200–250 kg (440–550 lb) (10) Compliance & Safety:- (a) Designed per AISC Steel Construction Manual, (b) ADA-compliant clearance around base (c) Rounded edges and anti-climb geometry
Supplying, fixing & installation of Contemporary Outdoor Sculpture / Water Feature–Ready Form (Artwork) with following broad specification:- Form Concept: Organic branching structure with disc-shaped platforms (lotus-inspired) (1) General Description:- A large-scale freestanding sculptural installation composed of multiple intertwined, fluid-form vertical members branching outward to support shallow circular disc elements. The sculpture is intended for permanent outdoor installation in a landscaped plaza or garden environment and may optionally function as a decorative fountain or reflective water feature. (2) Overall Dimensions (Approx.):- (a) Total Height: 2.4–3 m (8–10ft), (b) Maximum Width: 2.4–3 m (8–10ft) Disc Diameter: 300–450 mm (12-18 in), (c) Number of Discs: 9–12 units (varies by design intent) (3) Materials:- (a) Primary Structure: i) Stainless Steel: AISI 304 (UNS S30400) (AISI 316 optional for coastal or chlorinated environments) (b) Disc Elements: i) Formed stainless steel Balloon structures. (4) Surface Finish:- (a) High-polish mirror finish (Ra ≤ 0.2 μm), mechanically polished, (b) Optional clear anti-fingerprint or hydrophobic nano-coating, (c) Welds ground flush and polished to seamless appearance (5) Structural Components:- (a) Vertical Members: i) Hollow stainless steel sections, ii) Nominal OD: 80–120 mm, iii) Wall thickness: 2.5–3 mm, iv) Internally reinforced at junctions (b) Disc Supports: i) Integrated cantilever arms, ii) Hidden mechanical fastening or full-penetration welds (6) Foundation & Anchorage:- (a) Foundation Type: Reinforced concrete footing i) Depth: 0.4–0.6 m (1.5–2 ft subject to soil conditions) ii) Diameter: 1.4– 1.6m (4–4.5 ft) (b) Anchoring System: i) Stainless steel base plate, ii) Embedded anchor bolts (ASTM F1554 Grade 55 or equivalent) (7) Load & Environmental Design:- (a) Wind Load Resistance: ≥ 140 km/h (87 mph) (b) Live Load on Discs: Decorative only (non-climb rated), (c) Temperature Tolerance: 0°C to +50°C, (d) Corrosion Resistance: Urban outdoor exposure (8) Fabrication Method;- (a) CNC tube bending and 3D form rolling, (b) TIG welding (AWS D1.6 compliant), (c) Multi-stage polishing and passivation, (d) Shop pre-assembly for geometry verification (9) Installation Requirements:- (a) Crane installation (8–15 ton capacity (b) Laser alignment for verticality, (c) Final tolerance: ±25 mm over full height (10) Estimated Weight:- (a) Total Assembly: 200–250 kg (450-550 lb) (11) Safety & Compliance:- (a) Rounded edges and no sharp projections (b) Anti-climb geometry (c) AWS D1.6 (Stainless Steel Welding)
Supplying, fixing & installation of Freestanding Outdoor Sculptural Installation (Artwork) with following broad specification:- Form: Torus Sculpture (1) GENERAL DESCRIPTION:- A large-scale circular sculptural form consisting of a thick annular ring with an organically patterned perforated surface. The sculpture is vertically oriented and mounted on a concealed structural base, intended for permanent outdoor installation in landscaped public or private spaces. (2) OVERALL DIMENSIONS (APPROX.):- (a) Overall Height (Diameter): – 2 m, (b) Inner Opening Diameter: 0.3m , (c) Ring Thickness (Radial): 1200 mm , (d) Overall Depth: 250-300mm, (e) Ground Clearance: 50 – 100 mm (concealed support) 3. MATERIAL SPECIFICATION (a)Primary Material- i) Stainless Steel: AISI 304 (UNS S30400 / EN 1.4301) (AISI 316 optional for coastal or high-corrosion environments) (b) Plate Thickness- i) Main body plates: 8–12 mm ii) Internal stiffeners: 6–8 mm (4) SURFACE FINISH:- (a) Finish Type: Fine brushed finish (b) Finish Grade: #240–#320 grit (c) Edges: Fully radiused and deburred (d) Final Treatment: Pickling and passivation (e) Optional: Clear anti-graffiti or nano-protective coating (5) PERFORATION PATTERN:- (a) Pattern Type: Organic cellular / biomorphic (b) Hole Diameter Range: 30 mm – 100 mm, (c) Minimum edge distance between perforations: ≥ 25 mm (d) Cutting Method: CNC laser or water jet cutting (e) All cut edges smoothed and polished (6) STRUCTURAL DESIGN:- (a) Construction: Welded segmented plates forming a hollow torus (b) Designed to resist: Wind speed ≥ 140 km/h (c) Accidental human contact loads (d) Sculpture classified as non-climbable (7) FABRICATION:- (a) CNC cutting of perforated panels, (b) Precision rolling to circular geometry (c) TIG welding (AWS D1.6 compliant) (d) Welds ground flush and blended invisibly (e) Factory trial assembly prior to delivery 8. FOUNDATION & ANCHORAGE:- (a) Base Support- i) Concealed stainless steel pedestal or pin support ii) Support connected to internal structural frame (b) Foundation- i) Reinforced concrete footing, ii) Approx. size: 600 × 600 × 750 mm (subject to soil), (c) Anchors- Stainless steel anchor bolts: M20 (9) INSTALLATION:- (a) Crane-assisted lifting and positioning, (b) Vertical alignment tolerance: ±25 mm (c) All fixings concealed from public view (d) Final cleaning after installation (10) ESTIMATED WEIGHT:- (a) Total Sculpture Weight: 200 – 250 kg (depending on thickness) (11) SAFETY & COMPLIANCE:- (a) Rounded edges, no sharp corners (b) No pinch points or protruding elements (c) Designed in accordance with: (d) AISC / Eurocode 3 (e) AWS D1.6 – Stainless Steel Welding (f) ISO 12944 – Corrosion Protection
Fabrication, supply, transportation and installation of custom-designed artistic urban furniture / play-cum-interaction structures made of Mild Steel (MS) sections including straight, inclined, circular and modular elements complete with cutting, bending, welding, grinding, surface preparation, one coat of anti-corrosive epoxy/zinc-rich primer and two coats of outdoor grade PU/epoxy paint in approved colours, fixing over paved surface or concrete base using base plates and anchor bolts/chemical anchors, including all labour, tools, equipment, scaffolding, consumables, taxes and incidentals, complete as per approved design, drawings and directions of Engineer-in-Charge.
Item Rate BoQ
BoQ_Ver3.0
Bidder Name :
PRICE SCHEDULE (Schedule A Section II) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only). The rates quoted by the contractor shall be inclusive of all statutory taxes & nothing extra shall be payable. The contract provides for acceptance of itemwise lowest rates offered by the bidders. 1. The contract provides for acceptance of item wise lowest rates. 2. As the contract provides for acceptance of item wise lowest rates. The amount of contract awarded to any successful bidder shall form the basis of final calculation of Earnest money to be retained by the Board as per MES manual & the balance amount of Earnest money deposits shall be refunded to the bidder after retaining the appropriate Earnest money deposit as per MES manual. 3. The quantities given under the contract are provisional & may vary as per actual requirement of itms generated during the year. In case of non-execution of work or execution of lesser quantity, the contractor shall not be entitled to any compensation or damage on account of deemed profits etc for any reason, whatsoever.
NUMBER #
Chair bench with terrazzo finish: Each bench consists of 2 Nos. L-shape base support in grey cement color (thickness; 100mm, Back height; 1000mm, front height 450 mm, Base width; 620mm) and 5 Nos. reinforced concrete planks in red Terrazzo Finish of size 1500 mm x 200mm x 50mm Overall Dimension: Seating length of the 1500mm, Seating height of the Bench 450 mm, Total height of the Bench: 1000mm
Rectangular Bench Overall Dimensions: Platform size - 1500mm length 450 mm width, 100mm thickness and 450 mm height with two legs of 150 mm thickness. Sitting Platform is in Red colour while the legs are in grey colour Manufactured by using M-30 grade of Concrete Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof
Curved bench Overall Dimensions: Platform size - 1200mm length 350 mm width, 450mm height Sitting Platform is in Red colour while the legs are in grey colour Manufactured by using M-30 grade of Concrete Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof
Rectangular table with two benches: Consists of 2 Nos. Base support in grey cement concrete, table top of size 1500mm length x 800mm width x 50mm thickness in red color of terrazzo finish, and 2 Nos. benches of size 1500mm length x 325mm width x 50mm thickness in red color of terrazzo finish. Overall Dimension: Height of table: 800mm, Height of bench: 450mm
Circular table with four bench Consists of 2 Nos. Base support in grey cement concrete, Table of size 1000mm dia. X 50mm thickness in terrazzo or red color finish, and 4 nos. benches of size 1000mm length x 350mm width x 50mm thickness in terrazzo or red color finish (curved) Overall Dimension: Height of table: 800mm; Height of benches : 450mm
Square table with four benches Consists of 2 Nos. Base support in grey cement 1 Nos. Table top of size 1000mm x 1000mm width x 50mm thickness in terrazzo erred color finish, and 4 Nos. Benches of size 1000mm length x 350mm width x 50mm thickness in terrazzo or red color finish Overall Dimension: Height of table: 800mm Height of benches: 450mm
Providing and fixing precast concrete bollard of cylindrical shape made from M-30 grade or higher cement concrete, machine cast, properly cured, with smooth finish and rounded edges, free from cracks and honeycombing, of approved design and dimensions, suitable for installation on footpaths, parks, and pedestrian areas, including excavation, providing and laying cement concrete foundation (M-15 or higher), placing, alignment, grouting, curing, and finishing complete in all respects, with finished surface in natural concrete grey or as directed by the Engineer-in-Charge; complete item including all materials, labour, tools, and incidentals.
Item Rate BoQ
BoQ_Ver3.0
Bidder Name :
PRICE SCHEDULE (Schedule A Section III) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only). The rates quoted by the contractor shall be inclusive of all statutory taxes & nothing extra shall be payable. The contract provides for acceptance of itemwise lowest rates offered by the bidders. 1. The contract provides for acceptance of item wise lowest rates. 2. As the contract provides for acceptance of item wise lowest rates. The amount of contract awarded to any successful bidder shall form the basis of final calculation of Earnest money to be retained by the Board as per MES manual & the balance amount of Earnest money deposits shall be refunded to the bidder after retaining the appropriate Earnest money deposit as per MES manual. 3. The quantities given under the contract are provisional & may vary as per actual requirement of itms generated during the year. In case of non-execution of work or execution of lesser quantity, the contractor shall not be entitled to any compensation or damage on account of deemed profits etc for any reason, whatsoever.
NUMBER #
Providing and installing Bridge Ladder playground equipment, Arihant make (Model No.PGPGSL47) or equivalent, made of hot-dip galvanized steel pipes, powder-coated for corrosion resistance, suitable for safe outdoor play by children, complete with all fittings and accessories, installed as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing S-Bridge Ladder Scrambler playground equipment, Arihant make (Model No. PGSL05) or equivalent ,made of hot-dip galvanized steel pipes with a curved overhead bridge frame and vertical ladder supports. The equipment shall be suitable for children aged 4–12 years, designed for climbing and balancing activities, accommodating 3–4 children at a time. All metal components shall be corrosion-resistant and powder-coated, complete with ladders, fittings, fasteners, safety caps, and foundation supports, installed complete in all respects as per site requirements.in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing Loop Rung Scrambler playground equipment, Arihant make (Model No. PGFT05) or equivalent , consisting of a rigid hot-dip galvanized steel frame with a horizontal top pipe fitted with multiple loop rungs for hanging and climbing activity, designed to enhance upper-body strength, grip, and coordination. The structure shall be fabricated from corrosion-resistant GI pipes, powder-coated with a minimum specified thickness, and secured with galvanized/SS fasteners and safety end caps. The equipment shall be suitable for children aged 5–14 years, accommodating 4–5 users at a time, complete with all fittings, accessories, and foundation supports, installed in all respects as per site requirements and safety standards.in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing Circular Swing playground equipment, Arihant make (Model No.PGKD06) or equivalent, made of hot-dip galvanized steel pipes with a strong circular frame and smooth bearing assembly for safe swinging action. The swing shall be fitted with durable FRP seats, designed for children aged 3–10 years, accommodating 2 children at a time. All metal parts shall be powder-coated with exterior-grade coating for corrosion resistance, complete with all fittings, fasteners, and safety caps, and installed complete in all respects as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete.
Providing and installing Mini Sunset Scrambler playground climbing equipment, Arihant make (Model No. PGSL02) or equivalent , made of hot-dip galvanized steel pipes forming a strong dome-shaped spatial climbing structure. The equipment shall be suitable for children aged 4–12 years, designed for safe climbing and balancing activities, accommodating 4–5 children at a time. All metal parts shall be corrosion-resistant and powder-coated, complete with all fittings, fasteners, safety caps, and foundation supports, installed complete in all respects as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing Crystal Maze playground climbing equipment, Arihant make (Model No.PGSL01) or equivalent, made of hot-dip galvanized steel pipes forming a strong spatial climbing structure, suitable for children aged 5–12 years. All metal parts shall be corrosion-resistant and powder-coated with exterior-grade polyester coating. The structure shall be safe, durable, and designed for multiple users, complete with all fittings, fasteners, protective caps, and foundation attachments, installed complete in all respects as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete.
Providing and installing Fish-shaped dustbin, Arihant make (Model No.PGGD25) or equivalent, made of FRP (Fiber Reinforced Plastic), suitable for outdoor use in parks and public areas. The bin shall be durable, weather-resistant, and designed to collect both dry and wet waste, with an approximate capacity of 84 litres. The item shall be supplied in the color as shown and installed complete in all respects as per site requirements complete.
Providing and installing Frog-shaped dustbin, Arihant make (Model No.PGGD23) or equivalent, made of FRP (Fiber Reinforced Plastic), suitable for outdoor use in parks and public areas. The bin shall be durable, weather-resistant, and designed to collect both dry and wet waste, with an approximate capacity of 84 litres, supplied in the color as shown and installed complete in all respects as per site requirements complete.
Providing and installing Four Seater Merry-Go-Round (MGR) playground equipment, Arihant make (Model No.PGMR05) or equivalent ,made of hot-dip galvanized steel pipes with a strong central support and smooth bearing assembly for safe rotation. The unit shall be fitted with durable FRP seats, suitable for children aged 3–8 years, accommodating 4 children at a time. All metal parts shall be corrosion-resistant and powder-coated, complete with all fittings, fasteners, safety caps, and foundation support, installed complete in all respects as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and fixing XTRA LARGE Merry-Go-Round (MGR) Arihant make (Model No. PGMR08) or equivalent with FRP platform, hot-dip galvanized steel support and railings, bearing assembly, powder-coated finish, including foundation, installation and all accessories, complete in all respects as directed by the Engineer-in-Charge.
Providing and installing Verti Go Round playground equipment, Arihant make (Modle No.PGMR11) or equivalent , consisting of a high-density polyethylene (HDPE) circular platform mounted on a heavy-duty hot-dip galvanized steel central support with smooth bearing assembly for safe rotation. The unit shall be provided with vertical hand railings for grip and balance, suitable for children aged 5–12 years, accommodating up to 4 children at a time. All metal components shall be corrosion-resistant and powder-coated, and the equipment shall be complete with bearings, fittings, fasteners, safety caps, and foundation supports, installed complete in all respects as per site requirements.in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing Jumbo Spring Rider playground equipment, Arihant make (Model No.PGKD36) or equivalent,made of durable FRP (Fiber Reinforced Plastic) mounted on a heavy-duty spring steel assembly with hot-dip galvanized steel foundation. The equipment shall be suitable for children aged 3–6 years, designed for single-user play, weather-resistant, and complete with all fittings, fasteners, safety caps, and foundation support, installed complete in all respects as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing Duck Spring Rider playground equipment, Arihant make (Model No. PGKD11) or equivalent, made of durable rotational-molded, non-toxic plastic mounted on a heavy-duty spring assembly with hot-dip galvanized steel support. The equipment shall be suitable for children aged 3–6 years, designed for single-user play, corrosion-resistant, and complete with all fittings, fasteners, and foundation support, installed as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete.
Providing and installing ROTO Spiral Tube Slide (7 ft height) playground equipment, Arihant make (Model No. ROSD18) or equivalent , comprising a hot-dip galvanized steel support structure with LLDPE roto-moulded spiral tube slide, access ladder, hand grips, landing support, and safety railings. The equipment shall be suitable for children aged 4–12 years, with all metal parts corrosion-resistant and powder-coated, and all plastic components weather-resistant and safe for outdoor use. The item shall be complete with all fittings, fasteners, and foundation supports, installed complete in all respects as per site requirements.in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing FRP Double Roller Slide (7 ft) playground equipment, Arihant make (Model No.PGSD102) or equivalent , comprising a robust hot-dip galvanized steel support structure with FRP roller slides. The unit shall be suitable for children aged 4–12 years, accommodating 10–12 children at a time. All metal components shall be corrosion-resistant and powder-coated, and all FRP parts shall be durable, weather-resistant, and safe for outdoor use. The equipment shall be complete with ladders, hand grips, safety railings, platforms, foundations, and all necessary fittings, installed complete in all respects as per site requirements in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Providing and installing Four Seater Arc Swing playground equipment, Arihant make (Model No. PGSE01) or equivalent, comprising a sturdy arc-shaped hot-dip galvanized steel frame with a top support pipe and four independent swing seats. The swing assembly shall include durable rubber seats suspended with rubber-coated chains, S-hooks, swing clamps, and self-lubricated bearings to ensure smooth and safe operation. All steel components shall be corrosion-resistant and finished with high-quality polyester powder coating. The equipment shall be suitable for children aged 4–14 years, accommodating up to 4 users at a time, complete with all fittings, fasteners, foundation supports, and accessories, installed in all respects as per site requirements and applicable safety standards.in 1:1½:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
C242.pdf
Tender Documents • 2.05 MB
BOQ_836304.xls
BOQ • 9.24 MB
Download all tender documents and submit your bid