Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.0 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹50.1 L+₹59,133 (1.20%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹50.4 L+₹97,238 (1.97%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹50.8 L+₹1.3 L (2.69%)Rejected-Finance PO PS RUPA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 003 | WEST KAMENG | ARUNACHAL PRADESH | 790003 | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹51.4 L+₹1.9 L (3.86%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
26 Jul 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE 859 EWS, C/O 99 APO PIN-913859
SPL REPAIRS TO BLDG NO TWV-36 AND TWV-45 AT 847 FD WKSP COY, BLDG NO E/20/29, E/20/04, T/05 AND T/04 AT 482 COY ASC (SUP) TYPE A ALONGWITH PROVISION OF CERTAIN MINOR WORKS AT 847 FD WKSP COY EME AND MD ACCN
2022_MES_531794_1
8338/E8
Open Tender
Civil Works
Item Rate
180 days
Taenga
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹95,000
Yes
13 Aug 2022
17 Jun 2022
27 Jul 2022
17 Jun 2022
26 Jul 2022
1 Jul 2022
Amount
Excavation over area n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for construction of 1.20 m dia x 3.00 m deep sokage well , excavation in hard/ dense soil, foundation PCC 1:3:6 wells of honey combed precast PCC block wall masonary including intercepting chambers, RCC cover slab, filling with brick bats complete all as specified in drawing and as directed.
Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 160 mm on after they are laid and tested complete all as specified and directed.
M&L for 150mm dia SGSW pipes 150mm dia grade A laid in trenches and jointed in CM 1:1 including pipes laid on PCC bed, packing undr and haunching against sides complete all as specified and directed. Note : Earthwork, PCC bed and PCC haunchings shall be measured and paid separately.
Dismantling plain or corrugated steel sheeting of any gauge, thickness including nainital or similar roof coverings complete all as specified and directed.
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
Supply and fixing plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80 mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed.
M&L for applying two coats of anti corrosive roof paint over one coat of red oxide primer including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips all as specified and directed.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane of any description complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in subbase for floorings complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floorings including finishing the surface even and smooth w/o using extra cement complete all as specified and directed.
S&F 3mm thick, 38mm wide glass dividing strips inserted in position to conform to design.
M&L for 15 mm thick screed bed in CM 1:4 finished rough for laying floor tiles.
M&L for 20 mm thick screed bed in CM 1:6 finished rough for laying floor tiles.
Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying three coats of white wash.
Preparing old plastered surfaces of walls including stopping of distempered surfaces and applying one coat of white wash.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
M&L for TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide add for fair finished surface complete all as specified and directed.
M&L for Chequered cement concrete tiles 200x200x25mm etc. set and jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete finished rough to receive tiles complete all as specified and directed.
M&L Glazed coloured ceramic tiles (300x 200) x 6 to 7 mm thick as on vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
Dismantling of wall and ceiling board (fibre , pulp, insulated etc) insulation boards/slabs/blanckets/any thickness including cover fillets complete all as specified and directed.
S&F 6mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to wall surface etc complete all as specified and directed.
S&F 4mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed.
Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in roof kerbs or mud stops or plinth wall rounded or chamfered on edges, coping, in benching etc including necessary formwork complete all as specified and directed.
Taking down Chowkhats or frames exc 1.5 Sq.m but n exc 4 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
Taking down Chowkhats or frames n exc 1.5 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.
Supply and fix 2nd class hard wood plain framed panelled shutters 35 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer complete all as specified and directed.
Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars any numbers ,prepared to receive glass, gauge etc. with , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified SSR Part-I, section 8, clause 8.20(b) complete all as specified and directed.
Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 415-0 or Grade -E complete all as specified and directed.
S&F 100mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S&F 75mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 100 mm long of extruded section and fixed complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F pre coated mild steel floor door stopper tongue anodised 140mm length including vulcanised rubber piece complete all as specified and directed.
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed
M&L for 75 mm thick PCC (1:3:6) type C-1 ( using 20mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.
M&L for 75 mm thick PCC (1:2:4) type B-1 ( using 20mm graded crushed stone aggregate) finished even and smooth without using extra cement and making impression of expanded metal whilst the concrete is green complete all as specified and directed.
M&L for boarding clean sawn, plain, 20mm thick or feather edges 15mm to 20mm thick and fixed with 30mm laps etc.
Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturbed surface/ portion of the wall etc. complete all as specified and directed.
Material and Labour for Point wiring with 1.50 sq mm (nominal area), two single core PVC insulated unsheathed , 1100 volts grade, multi-stranded copper conductor FRLS Grade, in and including PVC casing capping with accessories with teak wood boxes and 3 mm thick plastic laminated sheet top cover size with all fittings and accessories including MS pressed steel terminal boxes of 1.22 mm thick of suitable size duly painted with red oxide metal primer for housing/mounting brackets switches,sockets etc, including PVC insulated unsheathed single core multi-stranded copper conductor FRLS Grade cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one light/point controlled by one way switch complete all as specified and directed.
All as per item No 68 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed
All as per item No 68 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the same board complete all as specified and directed
All as per item No 68 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 4.0 sqmm 1100 volts FRLS grade and earth continuity wire 4.0 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed..
S&F switch socket combination multipurpose 5/6 A flush type, 3 in 1 , 240 volts complete all as specified and directed.
S&F switch socket combination multipurpose 15/16 A flush type, 3 in 1 , 240 volts complete all as specified and directed.
S&F switch piano flush type SP, one way, 5 Amp , 240 Volts complete all as specified and directed.
S&F switch piano flush type SP, one way, 16 Amp , 240 Volts complete all as specified and directed.
Supply and fix ceiling rose surface bakelite 65 x 50 mm two to three terminals AC 230 volts complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mmx75mm for mounting the fittings complete all as specified and directed.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder, two square box for mounting including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in repair LED NU Bulb plus 15 W 865 B22 3 Star, 230 V, PF not less than 0.85 (min) of Make Havells or equivalent model of Make Bajaj/Philips/C&G/Surya/Eveready
S&F LED lights fittings 01x18 watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED lights fittings 1x9/ 1x10 watt, 220 V, AC bulkhead luminaire incl LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F PVC rectangular block for mounting DB's with 3mm plastic laminated sheet cover of size 35cmx30cmx5cm complete all as specified and directed.
Supply and fix sheet metal enclosures for DBs (Double door type) when MCB SPN 8 way with 200 Amps rated bus bar complete all as specified and directed.
Supply and fix MCB SP 6-32 Amp 240 volts,50 HZ , confirm to IS /IEC 60898 breaking capacity of 10 KA, C-curve complete all as specified and directed.
S&F MCB SP&N , 32 Amps, 240 volts, 'C' series, complete all as specified and directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 16 sq mm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down/ dismantling of old one complete all as specified and directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 4mm dia GI wire by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion complete all as specified and directed.
M/S ASHOK CONSTRUCTION
Sikha Traders
M/S R D TRADERS
M/S SUNRISE CONSTRUCTION AND CO
M/S KUNKAPU ENTERPRISES
M/S LARZAWANGPU AGENCIES
M/S MURPHEW ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .