MLALAD FUND.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 15m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand).

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

Supply and Fixing of Koochie/Hugo/Kompon/Arihant Big Shoulder Axial Machine: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of HDPE handles with free rotate Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.Equipment Dimensions: 100 X 46 X 133CM. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply and Fixing of Koochie/Hugo/Kompon/Arihant 2 Person Tai Chi Teflon Resistance Trainer: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of HDPE handles with free rotate Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.Equipment Dimensions: 95 X 90 X 152CM. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply and Fixing of Koochie/Hugo/Kompon/Arihant Resistance Foot Cycle: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handle is made of HDPE sub-seat handle. Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.Equipment Dimensions: 97 X 45 X 133CM.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply and Fixing of Koochie/Hugo/Kompon/Arihant Aero Walker: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. Equipment Dimensions: 144 X 50 X 133CM. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply and Fixing of Koochie/Hugo/Kompon/Arihant 2 person Air Skier: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. Equipment Dimensions: 113 X 50 X 133CM. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply and Fixing of Koochie/Hugo/Kompon/Arihant 3 Person Body Twister: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. Equipment Dimensions: 131 X 100 X 133CM. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply and Fixing of Koochie/Hugo/Kompon/Arihant Leg Curl and Extension Machine: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses ARM (Angular Resistance Module). The Angular Resistance Module system consists of several components, metal housing, pin and rubber bar. Resistance keep changing according to the movement degree. It can be moved with 2 directions. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are amde of HDPE sub-seat handle. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply. Equipment Dimensions: 91 X 40 X 133CM. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Providing and fixing 36mm thick EPDM (Ethylene Propylene Deine Monomer) Rubber flooring on existing surface in required color and shape. The EPDM Rubber flooring should be laid at site in dual color and pattern as per the direction of the Engineer-in-charge. All complete as per manufacturer specification.

Please Enable Macros to View BoQ information