Construction of 3Nos. Pickleball Court at Maharana Pratap Khel Gaon. 7001

Item Code [2022 12.46.1 Enamel paint]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Item Code [2022 15.5 WATER PROOFING]:Item Type [building] :: Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot 1.45Kg. per square meter of area for each course, second course of roofing felt type 3 grade –I (Hessian based self finished bitumen felt )and fourth and final course of stone grit 6mm and down size of pea sized gravel spread at 6cubes diameter per square meter including preparation of surface, but excluding grading, complete with Bitumen felt (Hessian base) type 3 grade - I conforming to : 1322.

Item Code [2022 3.1.1 M20]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Item Code [2022 3.16 Embankment]:Item Type [road] :: Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)

Item Code [2022 4.12 WMM]:Item Type [road] :: Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

Item Code [2022 4.17 Crusher Run Macadam]:Item Type [road] :: Crusher Run Macadam Base (Providing crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base) B By Mixing Plant : (i) For 53 mm maximum size

Item Code [2022 5.11 MSS]:Item Type [road] :: Sub Item Code [2022 5.11 MSS + (A) (i) b]: Close Graded Premix Surfacing/Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 75 tonnes/hour. Providing, laying and rolling of closegraded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type - A) or 13.2 mm to 0.09 mm (Type- B ) aggregates using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.) Type A MSS (Aggregate 0.27 Cum / 10 Sqm , Bitumen 22 kg / 10 Sqm) Bitumen VG - 30

Item Code [2022 5.2 i tack coat ]:Item Type [building] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Item Code [2022 5.3 BM]:Item Type [road] :: Sub Item Code [2022 5.3 BM + B (ii)]: Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder 3.3 %, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction) VG - 30 for Grading II (19 mm nominal size)

Item Code [2022 9.36]:Item Type [building] :: Sub Item Code [2022 9.36 + 9.36.1]: Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 50mm x 50mm x 3.15mm

Item Code [2022 9.8 gate & grating]:Item Type [building] :: Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Item Code [BSR2022 1.28]:Item Type [building] :: Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr. : All kinds of soil.

Item Code [E040100]:Item Type [Electrical] :: Sub Item Code [E040100 + E040107]: Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 KV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc.as requited. 2x2.5 sq.mm

Item Code [E060100]:Item Type [Electrical] :: Sub Item Code [E060100 + E060110/E060112]: P&F 240/415 VAC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping haracteristic) ISI marked IS 8828 (1996)conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Single pole MCB/6 A to 32 A reting

Item Code [E110100]:Item Type [Electrical] :: Sub Item Code [E110100 + E110104 / E110104C]: P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 10.0 Sq.mm / 4 core

Item Code [E110100]:Item Type [Electrical] :: Sub Item Code [E110100 + E110105 / E110105C]: P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 16.0 Sq.mm / 4 core

Item Code [E150200]:Item Type [Electrical] :: Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. B class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.

Item Code [E150700]:Item Type [Electrical] :: Sub Item Code [E150700 + E150705]: S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG G.I. ( Hot Dipped ) Wire

Item Code [E201800]:Item Type [Electrical] :: Sub Item Code [E201800 + E201802]: Add for supply and fixing of hot dipped galvanised Overhang of following size over the existing poles 88.9 mm OD x 3.25 mm thickness

Item Code [E201900 / E201910]:Item Type [Electrical] :: Sub Item Code [E201900 / E201910 + E201913]: Supply and erection of GI Octagonal / Conical pole of following length and dimension as per table E-10 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot di 8 Mtr.

Item Code [E203300]:Item Type [Electrical] :: Sub Item Code [E203300 + E203305]: P & F of IP 65 / IP66 protected High Power LED Flood Light system with extruded aluminium housing, toughened glass diffuser with suitable lenses on LED to acheive various beam angles, 240V, 50Hz - High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards.System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE and compliance High Power LED Flood Light 160W

Item Code [E203800]:Item Type [Electrical] :: Sub Item Code [E203800 + E203802]: P&F of thermoplastic/ PVC cable junction boxes of following sizes including clamps for holding the box, cost of DIN rail for MCB mounting, connectors for cables terminals, threaded cable glands made of polyamide material etc. complete in all respect. 300mm X 200mm X125mm

Item Code [Green Net]:Item Type [Other] :: Color: Green; Material: HDPE; Weight: 5 to 350 GSM; Packing Roll type, thickness 3mm

Item Code [PUR Synthetic Flooring]:Item Type [Other] :: Supplying and Installation of Synthetic Sports Flooring System PAVISINT SL 75 of 7mm thick composed of sportmat high quality recycled rubber granules and polyurethane elastomers of thickness 5mm, tensile strength DIN 53571: 0.6-1 mPa coated with PU pore sealer and self leveling wear coat and top coat with 2mm Polyurethane system, Approved by BWF, FIBA/ AENA category 3 with specifications of )i) Force Reduction (EN 14808):>25%; (ii) Standard Deformation:>0.5mm ; (iii) Rolling Load: 1500N ; (iv) Ball bouncing

Item Code [R 2022 5.1 i]:Item Type [building] :: Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 503 ( Low Porosity )

Please Enable Macros to View BoQ information