Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.6 LAccepted-AOC | ₹46.6 L Quoted ₹47.8 L | L1 | Accepted-AOC Being lowest bidder |
| 2 | L2₹48.6 LRejected-AOC H NO 597 SEONA ROAD RANJIT NAGAR PATIALA PB 147001 | PATIALA | PATIALA | PUNJAB | 147001 | ₹48.6 L | L2 | Rejected-AOC Being other than lowest bidder |
| 3 | L3₹49.0 LRejected-AOC 544 STREET NO 10 GHUMMAN NAGAR PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | ₹49.0 L | L3 | Rejected-AOC Being other than lowest bidder |
| 4 | L4₹49.6 LRejected-AOC | ₹49.6 L | L4 | Rejected-AOC Being other than lowest bidder |
| 5 | L5₹49.8 LRejected-AOC 21 GREEN ENCLAVE SULLAR PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | ₹49.8 L | L5 | Rejected-AOC Being other than lowest bidder |
| Sl No | Description | Qty | Unit | Arneja Builders L7 | FAVOURITE ENGINEERS L3 | AR CONSTRUCTIONS L1 | Buttar Construction Co. L5 | M/S RAJ KUMAR GUPTA L8 | Jawandha Enterprises L2 | DELTA CONSTRUCTION CO L4 | ANIL KUMAR AND CO L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00'Notes: (i) Please refer Schedule 'A' Notes of tender documents. | |||||||||||
| 2.00 | Taking down cement plaster of any description, any thickness from external/internal surfaces of walls/soffits/ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. | 1,031 | Square Metre | 10 ₹10,310 | 20 ₹20,620 | 20 ₹20,620 | 15 ₹15,465 | 25 ₹25,775 | 25 ₹25,775 | 20 ₹20,620 | 10 ₹10,310 |
| 3.00 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed. | 3 | Cubic Metre | 200 ₹600 | 250 ₹750 | 200 ₹600 | 150 ₹450 | 190 ₹570 | 250 ₹750 | 250 ₹750 | 500 ₹1,500 |
| 4.00 | M&L for fly ash Brick work with sub class 'B' bricks, class designation 100, old size bricks straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed. | 3 | Cubic Metre | 6,000 ₹18,000 | 5,000 ₹15,000 | 5,800 ₹17,400 | 5,500 ₹16,500 | 5,200 ₹15,600 | 6,000 ₹18,000 | 5,000 ₹15,000 | 5,500 ₹16,500 |
| 5.00 | M&L for dubbing out average 10mm thick in CM 1:4 on irregular surface of soffits of slabs/Chajja/ Sunshades etc complete all as specified and directed. | 50 | Square Metre | 200 ₹10,000 | 250 ₹12,500 | 200 ₹10,000 | 200 ₹10,000 | 190 ₹9,500 | 180 ₹9,000 | 160 ₹8,000 | 50 ₹2,500 |
| 6.00 | M&L for Cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement complete all as specified and directed.
Note : WPC will be measured and paid separately. | 382 | Square Metre | 230 ₹87,860 | 220 ₹84,040 | 230 ₹87,860 | 200 ₹76,400 | 225 ₹85,950 | 210 ₹80,220 | 190 ₹72,580 | 250 ₹95,500 |
| 7.00 | Supply only integral liquid water proofing compound complete all as specified and directed. | 13.79 | Litres | 150 ₹2,068.50 | 300 ₹4,137 | 120 ₹1,654.80 | 80 ₹1,103.20 | 140 ₹1,930.60 | 100 ₹1,379 | 100 ₹1,379 | 50 ₹689.50 |
| 8.00 | M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. | 439 | Square Metre | 220 ₹96,580 | 190 ₹83,410 | 220 ₹96,580 | 190 ₹83,410 | 240 ₹1.1 L | 200 ₹87,800 | 175 ₹76,825 | 200 ₹87,800 |
| 9.00 | M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed. | 210 | Square Metre | 230 ₹48,300 | 190 ₹39,900 | 210 ₹44,100 | 180 ₹37,800 | 240 ₹50,400 | 175 ₹36,750 | 170 ₹35,700 | 200 ₹42,000 |
| 10.00 | M&L for Supplying & applying for two component elastomeric acrylic polymer modified cementitious waterproofing coating on Brick level, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTMC1202, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, will be apply on both Positive & Negative side and resist up to 5 Bars of Hydrostatic Pressure. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. After coating will sprinkle Sand on the coating then apply plaster on the coating which is in contractor scope, complete as manufacturer specifications. 5 Year Warranty will be Provided only if Asian Paints Authorize Applicator will do the work. | 70 | Square Metre | 500 ₹35,000 | 400 ₹28,000 | 250 ₹17,500 | 350 ₹24,500 | 400 ₹28,000 | 450 ₹31,500 | 350 ₹24,500 | 450 ₹31,500 |
Tender Value
Refer Docs
EMD Value
₹95,000
Closing Date
18 Nov 2025, 6:00 pmClosed
Garrison Engineer (South) Patiala
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH SANGRUR ROAD PATIALA CANTT
As per tender documents
2025_MES_737272_1
GE(S)/PAT/T-70/2025-26
Open Tender
Civil Works
180 days
Patiala and Nabha
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (South) Patiala
₹95,000
Yes
30 Jan 2026
28 Oct 2025
20 Nov 2025
28 Oct 2025
18 Nov 2025
11 Nov 2025
28 Oct 2025 - 4 Nov 2025
Amount
'Notes: (i) Please refer Schedule 'A' Notes of tender documents.
Taking down cement plaster of any description, any thickness from external/internal surfaces of walls/soffits/ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed.
M&L for fly ash Brick work with sub class 'B' bricks, class designation 100, old size bricks straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for dubbing out average 10mm thick in CM 1:4 on irregular surface of soffits of slabs/Chajja/ Sunshades etc complete all as specified and directed.
M&L for Cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified and directed.
M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed.
M&L for Supplying & applying for two component elastomeric acrylic polymer modified cementitious waterproofing coating on Brick level, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTMC1202, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, will be apply on both Positive & Negative side and resist up to 5 Bars of Hydrostatic Pressure. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. After coating will sprinkle Sand on the coating then apply plaster on the coating which is in contractor scope, complete as manufacturer specifications. 5 Year Warranty will be Provided only if Asian Paints Authorize Applicator will do the work.
M&L for complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder or manually (if directed) complete all as specified and directed.
M&L for applying acrylic thick wall care putty on external/internal surfaces of walls/ceilings/soffits etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.
M&L for applying two coats of oll bound distamper white or tinted, over and including a coat of primer including preparation of plastered Surfaces of wall complete all as specified and directed.
M&L for applying three coat of white wash including preparation of plastered or old Surfaces of ceiling complete all as specified and directed.
M&L for preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed
Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.
M&L for 100mm thick cement concrete work 1:4:8 type D-2 in sub-case to flooring etc complete all as specified and directed.
M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base of floor complete all as specified and directed.
M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.
M&L for vitrified mat finish ceramic tiles joint free premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for vitrified tiles joint free premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for Vitrified ceramic tiles joint free premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in skirting etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 10 mm thick rendering in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for mat finish anti skid ceramic tile joint free premium quality coloured tiles 300 X 300 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for machine cut kota stone slab (nearest to 58cmx58cm in size) flooring 20-25mm thick laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 100mm wide border of Baroda Green Marble complete all as specified and directed.
M&L for pre-polished Baroda Green marble, machine cut as in floorings/ shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing incl 100mm wide border of White Marble in flooring complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.
M&L for rounding to edges (both side edges) of stone slabs (of fany description), such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete a specified and directed.
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good to disturbed surfaces complete incl ventilators including reqd shape for hold fast block for new frame complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. Note : S&F of hinges shall be measured and paid separately under respective item.
S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame incl complete all as specified and directed. Note : S&F of hinges shall be measured and paid separately under respective item.
M&L for cement concrete (1:2:4) using 12.50 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats, hold fasts etc., complete all as specified and directed.
S&F factory made flush shutters 30mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed.
S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed. Note : Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge and complete all as specified and directed.
S&F steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed and skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 for four nos for each window including S&F following fittings welded to each window :- (a) Holdfasts 150mm long 12mm x 3mm made to shape – 04 Nos per window (b) Handle of Z Sec 20mmx25mm, 100mm long – 1 Nos of leaf, (c) MS tower bolt 150mm long - 02 Nos per leaf (d) ‘Z’ sec 20mm x 25mm, 100 long stopper – 01 Nos per leaf, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges – 01 Nos per leaf (f) MS pintal hinges of size 75mmx12mm – 02 Nos per leaf (g) Fabrication and fixing arrangement complete. (h) Clear Glass 4 mm thick (j) Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm (k) Grill of 8mm sq. bar of length equal to the width of window @ 100mm c/c with cut space to accomodate the handle where directed/applicable.
S&F 50 micron powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge complete all as specified and directed.
S&F stainless steel finished 202 Grade butt hinges 100mm long complete all as specified and directed.
S&F stainless steel 202 Grade finished 150mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and directed.
S&F Stainless Steel 202 Grade Finished curved Handles 150 mm long complete all as specified and directed.
S&F Stainless Steel 202 Grade Finished Sliding Door Bolt/Aldrop 16 x 300mm with square nuckle complete all as specified and directed.
S&F 300mm, mild steel ordinary rat tail rod (helical type) pattern springs including roller and roller plate complete all as specified and directed.
S&F Aluminium alloy anodised extruded fabricated type handle 150mm long complete all as specified and directed.
S&F Aluminium alloy anodised extruded fabricated type handle 100mm long complete all as specified and directed.
S&F Aluminium alloy, anodised, barrel tower bolt (bolt type) 150 mm long of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, all complete all as specified and directed.
S&F Aluminium alloy, anodised,250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 5 mm thick clear toughened glass for glazing works etc fixed with aluminium beads/uPVC windows any size of pane complete all as specified and directed
M&L 5mm thick frosted glass in ventilators/ windows/ doors fixed in any metal frame work complete all as specified and directed.
S&F Stainless steel wire cloth, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Dismentling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.
S&F 12mm thick high density high moisture resistant (HDHMR) exterior grade board with both side laminate (BSL) with density of 850 kg/cum complete all as specified and directed
M&L for preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified.
M&L for preparing old wooden surfaces and applying two coats of synthetic enamal paint complete all as specified.
M&L for preparing new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over primer complete all as specified.
M&L for preparing old steel and iron surfaces of any description and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed.
Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed.
Demolition of mud phuska on roof any thickness including removal to the low lying area or outside the defence land complete all as specified and directed.
M&L for roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
M&L for PCC 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed.
M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
M&L for providing and laying a single ply APP membrane system comprising of application of oil based bitumen primer coat @ 0.25 to 0.3 Kg/ Sqm of Sikabit T Primer and then applying a layer of polyester reinforced APP modified bitumen membrane Sika®Shield P35 PE IN 4mm (SikaBit T 140 MG), mineral finish to the primed substrate having a thickness of 4 mm (-0.2/+0.3 mm) (EN 1849-1), a cold flexibility of -2 °C (EN 1109), Tensile strength (L x T) of 600 x 400 N/5cm; water tightness of > 10 Kpa as per EN 1928 (B); elongation at break: (L x T): 40 % ; Impact resistance of 700mm as per EN 12691. all as specified and directed. Note : The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only.
M&L for plain cement conceret tiles 25cmx25cmx22-25 mm thick machine pressed set jointed in neat cement slurry in floors and cut polished and laid over 15 mm thick bed in CM 1:4 complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate as in roof kerbs or mud stops and benching, rounded or chamfered on edges, coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound complete all as specified and directed. Note:WPC shall be paid separately
S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged pvc rain water pipe complete all as specified and directed. Note : Clamps will be measured and paid separately.
S&F PVC (SWR) bends of any radius for 110mm bore complete all as specified and directed.
S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.
Demolition of reinforced cement concrete in cutting of reinforcement of any description in any position such as roof projections/ chajjas/ water retaining structures etc (reinforcement cut to a required facilitate) upto 10m height including temporary arrangement of necessary scaffolding, ladders etc complete all as specified and directed.
M&L for Reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Form work rough finished to soffits of suspended slabs such as roof slabs , shelves not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for Form work rough finished to edges of concrete slabs exc 5 cm but not exc 10 cm thick complete all as specified and directed.
M&L for TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed.
Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.
S&F 25mm (OD 27.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required complete all as specified and directed.
Taking up or down existing steel tubing and connections, 25mm bore complete all as directed and specified.
S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.
Refixing 25mm bore GI steel water tubing medium grade fixed to walls complete all as specified and directed.
Taking up or down existing steel tubing and connections, 15 mm bore complete all as directed and specified.
S&F 20mm (OD 22.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required and suitable for fixing 15mm CP faucets/ fixtures complete all as specified and directed.
S&F Female Brass Threaded Adaptor (FTA/ FBTA) for 20mm dia CPVC pipe complete all as specified and directed.
S&F Brass elbow (3/4 x 1/2) for 20mm dia CPVC pipes complete all as specified and directed.
S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap snow white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Note : EWC with S trap will be provided only on G.F. and other remaining floors will be provided with P trap EWCs.
S&F CP jet for EWC with chrome finished connction pipe including all accessories for fixing complete in all respect all as specified and directede.
S&F flushing cistern of Polymer/PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed.
S&F vitreous china premium/1st quality wash basin (under counter oval shaped), of make Cera Cat. No. S2030104 or euivalent of make mentioned hereinafter, snow white, size 560x470x190 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions complete all as specified and directed. Note : The items for counter will be measured and paid separately.
S&F in repair, Vitreous China Urinal 375 x 390 x 590 mm, Half stall type, snow white including fixing plug, Cast Iron Bracket duly painted/Erecting Stand including cutting,CP 32mm flush pipe etc all fittings complete all as specified and directed.
S&F Vitreous china urinal partition white of size 310x700 mm ,Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs all as specified and directed
S&F 15 mm fancy type chromium plated quarter turn bib tap of long body with CP wall flange cast copper alloy with crutch or butterfly handles screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and directed.
S&F15mm dia fancy type quarter turn Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F Angle valve quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.
S&F 450mm long braided hose/PVC connection with 15mm brass nuts complete all as directed and specified.
S&F concealed stop cock quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.
S&F 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered/bevelled edge etched smooth finish etc.complete fixed in position complete all as specified and directed.
S&F CP/matt finished peg set of size 300mm long and 30mm wide with 6 nos hooks of approved quality fixed with suitable screws complete all as specified and directed.
S&F CP finished towel ring square shaped of size 135 x 195 mm including all accessories like wall flange/ cup fixed with suitable PVC wall plugs & screws as per manufacturer's instructions complete all as specified and directed.
S&F soap dish CP plated of suitable size to accommodate soap complete all as directed and specified.
S&F overhead shower minimum 125mm square shaped with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed.
S&F stainless steel grating 125 x 125 mm size square shaped with self locking arangement for floor trap fixed in position complete all as specified and directed.
S&F CP waste couplings 32mm size full thread with 80mm height complete fixed in position complete all as specified and directed.
S&F Urinal spreader for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed.
S&F PVC(HDPE) SWR , 32 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, including bends/tee/elbow etc. laid in walls for connecting bottle traps complete all as specified and directed.
S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20mm bore iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed.
Taking down sewage pipe of in any position/size/description complete all as specified and directed.
Taking down bends/floor traps/nahani traps/tee/branch pieces/cowls etc of in any position/size/description complete all as specified.
S&F PVC Type-B (SWR) pipe single socket 110mm bore confirming to IS 13592-92 in any length with rubber ring joints fixed to wall ,including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.
S&F PVC Type-B (SWR) pipe single socket 110mm bore confirming to IS 13592-92 in any length with rubber ring joints laid in trenches/floor ,including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.
S&F PVC Type-B (SWR) pipe single socket 75mm bore confirming to IS 13592-92 in any length with rubber ring joints fixed to wall ,including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.
S&F PVC Type-B (SWR) pipe single socket 75mm bore confirming to IS 13592-92 in any length with rubber ring joints laid in trenches/floor ,including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.
S&F PVC (SWR) bend 110mm bore pipes (any radius) with access door fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) bend 75mm bore pipes (any radius) with access door fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) double branch door Tee suitable for 110mm bore pipes ISI marked fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) double branch door Tee suitable for 75mm bore pipes ISI marked fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) Single door Tee suitable for 110mm bore pipes ISI marked fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) Single door Tee suitable for 75mm bore pipes ISI marked fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) cowls for 110mm bore pipes fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) 'P' or 'S' trap 110mm bore with long arm ISI marked fixed with rubber ring joint complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent/rubber ring joint complete all as specified and directed.
S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.
M&L for demolition of cement concrete unreinforcement of any thickness complete all as specified and directed.
M&L for water proofing treatment to sunken floor with depth not exceeding 450mm with the following course of treatment/ specification: (i) Cleaning top surface of floors /slabs and laying 100 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation . (vii) 2 Nos 40mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate Note : Only top/finished horizontal surface will be measured for the payment purpose.
M&L Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and directed.
M&L prepration of new plastered or unplastered surface of walls and applying two coats of distemper oil emultion over all as specified and directed
M&L for preparing old plastered surfaces of ceilings and applying one coat of white wash in all complete all as specified and directed.
S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats, PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 105x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item.
S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats, PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 125x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item.
S&F Aluminium 200mm anodised , barrel tower bolt of extruded complete all as specified and directed
S&F Aluminium handles 125mm cast type , anodised complete all as specified and directed.
S&F Floor door stoper of aluminum alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.
M&L for providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beed 20mm size complete all as specified and as directed.
S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and directied
M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed.
M&L for Ceramic floor tiles of 7 to 8mm thick of size 600 X 600 mm in floor etc set and jointed in neat cement lurry and pointed in white cement to match over and including 15mm thick screed bed in CM (1:4) laid in complete all as specified and directed.
M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in padding over roof maintaining a slope of 1:100 using water proofing compound finish even and smooth without using extra cement complete all as specified and directed.
M&L for the following roof treatment. (a) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick weight not less than 3.60kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt, fixed as per manufacturer’s instructions complete all as specified and directed. (b) Applying one coat of bituminous primer confirming to IS-3384 @ 0.3 Ltr/Sqm. (c) Applying one coat of aluminium paint over APP membrane @ 0.50 litres per Sqm all as specified and directed. (d) Applying 15mm thick cement screed plaster in CM 1:4 on roof thick even and fair.
M&L for hard core of broken bricks of gauge n exc. 63 mm spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed.
All as per item No 146 here in before on vertical surfaces as in skirting/dado of size as required at site but excluding 25mm thick PCC complete all as specified and directed.
Supply and installation of room window type air conditioner electric driven (single phase), cooling capacity 4500 K Cal per hour (1.5 Ton) , not less than BEE 3 star rated complete all as specified and directed.
Supply and fix voltage steblizer of capacity 4 KVA r electric driven single phase of range 130 to 290 Volts complete all as specified and directed.
Supply and fixing SP&N enclosure with 2 pole and Earth Metal Plug & Socket for incorporating 10A / 20A SPN / DP MCB With Plastic Cover earth complete with and including one single pole MCB of 20 Amp complete all as specified and directed.
Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in and including PVC concealed conduit with 6.0 Sqmm PVC copper conductor cable as in earth wire system, including taking out old wiring complete all as specified and directed. NOTE: 2 single core of size 6 sqmm PVC insulated and unsheathed cable, one single core 6sqmm PVC insulated and unsheathed copper conductor cable as earth wire and PVC concealed conduite shall be measured one running metre as one unit.
Supply and installation of Refrigerator, electric driven (Single phase),capacity of 310 Ltrs or nearby higher capacity as avialable, double Door, Frost Free, not less than 3 star Rating complete all as specified and directed.
S & F Deep freezer Glass top, capacity of 320 ltrs or nearby higher capacity as available, having double door complete all as specified and directed .
S & F water cooler electric driven (single phase) fully stainless steel body, having storage capacity of 120 ltrs or nearby higher capacity as avialable and nominal cooling capacity of 60 ltr per hour complete all as specified and directed .
Supply and fixing voltage steblizer 4 KVA capacity ,single phase , Voltage variation from 110 Volts to 240 Volts complete all as specified and directed
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.
M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point complete all as specified and directed. in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.
All as per item No 157 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed.
All as per item No 157 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed.
All as per serial item No 157 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed.
M&L for Modular Socket 6A/16A - 2/3 pin 2 module type all as specified and directed.
M&L for Modular Socket, 6A - 5 pin 2 module type all as specified and directed.
M&L for Modular switch 1 way 6A, 1module type all as specified and directed.
M&L for Modular switch 1 way 16A, 1 module type all as specified and directed.
M & L for Fan step regulator, 120W - 1 module complete all as specified and directed.
Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all as specified and directed.
Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed. Note: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.
Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar complete all as specified and directed. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The DB shall be fiush fixed and making good the disturbed surface shall be part of job at no extra cost.
Supply and fix in replacement of MCB SP up to 6-32 Amp complete all as specified and directed.
Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.
Supply & fix in replacement of existing unserviceable FTL with new techonlgy self blasted LED retrofit tube lamp with thermoplastic body with high lumen 18 w 6500 K suited for installation in existing tubelight including neccessary electric conection with box type batten complete all as specified and directed.
Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting, complete all as specified and directed.
Supply and fix LED Lamp 9 watt all as per specified and directed.
Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt complete all as specified and directed.
Supply & fix in LED mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and directed.
M&L for Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed Note:- Old u/s C/Fan to be deposited in MES store.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep with louver complete all as specified and directed. Note: Fixing of Exhaust Fan on wall with suitable size anchor bolt , making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 230 mm sweep with louver complete all as specified and directed. Note: Fixing of Exhaust Fan on wall with suitable size anchor bolt , making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost.
S&F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.
S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts VTPN 4 ways (one incoming three phase & four out goings three phase )for MCCB, comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 10 KA IHLGSF0100 =01 NO as incoming Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii) connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly with degree of protection IP 54 & PU gasket a machenical perfact IK O9.
Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 25 Sqmm 3 & 1/2 Core complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of Pipes, cables, poles,Stay and strips etc and getting out in Soft/Loose soil complete all as specified and directed.
Returning, filling-in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material not exceeding 50m and depositing where directed at a level of not exceeding 1.5m above the starting point complete all as specified and directed.
Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.
M&L for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and directed .
Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40x40x6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I complete all as specified and directed.
Supply and fixing water storage heater of capacity 25 ltrs , BEE. 5 (Five) star rated complete all as specified and directed. Note:- Old u/s C/Fan to be deposited in MES store.
Jawandha Enterprises (BID ID -3477051)
FAVOURITE ENGINEERS (BID ID -3475504)
DELTA CONSTRUCTION CO (BID ID -3477094)
Buttar Construction Co. (BID ID -3475989)
ANIL KUMAR AND CO (BID ID -3477211)
Arneja Builders (BID ID -3474480)
M/S RAJ KUMAR GUPTA (BID ID -3476847)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.17 MB
T-70.pdf
Tender Documents • 1.08 MB
BOQ_825512.xls
BOQ • 0.52 MB
Download all tender documents and submit your bid