GE (N) P/TOKEN- 11 OF 2023-2024REPAIR TO FLOORING, HARDSTANDING, PATH AND CERTAIN MISC CIV WKS IN THE AREA OF MANOJ PANDEY, SHIVNERI AND CERTAIN MISC AREA OF AGE B/R(CENTRAL) UNDER GE(N) PUNE

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks exc. 10 cm in width, type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0m height of Bldg complete all as specified and directed.

M&L for 15mm thick cement rendering in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg with using of water prrofing compound as per manufacture's instruction complete all as specified.

Supply only liquid water proofing compound Make: Pidicrete of Pidilite/cement mix plus of Berger all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer upto 12.0mtr height of Bldg complete all as specified.

M&L for rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement and two coats of oil bound distemper of any tint over a coat of primer upto 12.0mtr height of Bldg complete all as specified.

M&L for preparation of old treated wall surface of any description, width or girth, and applying one coat of cement base paint upto 12.0m height of Bldg complete all as specified.

M&L for preparation of old treated wall surface of any description, width or girth, and applying one coat of oil bound distemper upto 12.0m height of Bldg complete all as specified.

Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for PCC type D-2,1:4:8 (using 40mm graded stone agg) as in foundation, sub base of floor,filling and mass concrete complete all as specified and directed

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.09 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 incl dismantling of existing tiles complete all as specified.

M&L for coloured vitrified double charge tiles 10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 incl dismantling of existing tiles complete all as specified.

M&L for glazed ceramic coloured tiles of size 450x300x7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM1:4 incl dismantling of existing tiles complete, all as specified.

M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) incl dismantling of existing tiles complete all as specified. Make: Johnson Endura textured design or equivalent of Kajaria/Somany).

M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB platform and like set in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges incl dismantling of existing stone slab complete,complete. all as specified.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing in cement mortar and making good to disturbed surface incl dismantling of existing old one complete all as specified and directed

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed.

-Ditto- all as per Srl item No 20 here-in-before, but except tubing

S&F for 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed.

All as per Srl item No 22 here-in-before, but except tubing complete all as specified and directed.

M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed.

S&F for repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and directed.

-Ditto- all as per item No 26 here in before but 1000Ltrs capacity complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) ETWC white, including trap, connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm incl CP brass waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and incl M S brackets complete all as specified and directed.

S&F in repair vitreous china Urinal, Half stall type, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including 32mm brass CP waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Pt No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (Anglo indian type) complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe for WHB/kitchen sink of length 1.0m incl fixing the same complete all as specified and directed Make:Prayag or ISI marked

S&F in repair 32mm dia PVC waste pipe for urinal of length upto1.0m incl coupling incl fixing the same complete all as specified and directed Make:Prayag or ISI marked

S&F in repair 40mm dia PVC waste pipe for kitchen sink upto1.0m incl coupling incl fixing the same complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as specified and directed.

S&F in repair cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified.Make : Prayag/Polytuff.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, incl waste coupling waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm all as specified.

S&F in repair stainless steel Gde -304 plate rack of approved make of size 24''x30"x10" complete all as specified and directed. Make: Prayag Grade-304 or equivalent

S&F in repair glass shelf of size 450mm x150mm x8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified and directed.

S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified and directed.

S&F in repair of corner glass shelf of size 200mm dia and 8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified and directed.

S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : CERA -F8030103 or of equivalent .

S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair brass chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs washing machine cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Make:Johnson Cat Pt No T2804C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90gms Make: Prayag or equvalent of ISI marked

S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make : Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make:Johnson VIVA new series Cat Pt No: T4801C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent

S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete all as specified and directed.

S&F in repair grating round 75 mm size of steel CP with/without hole complete all as specified and directed.

S&F in repair grating round 100mm size of steel CP with/without hole all as specified.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and directed.

S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and directed.

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and directed.

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and directed.

M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and reparing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

M&L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed.

M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed.

M&L for fixing of door seal made out of aluminum section/flat colour coated 40mm wide with nails to cover the gaps between dooer and floor and similar places complete all as specified and directed.

Removing of vegetation / plantation on the wall/ roof/ any position of up to fourth storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good surface incl removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

Taking down chowkats or frames n.exc 1.50 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

All as per srl item No. 80 above but exc 1.50 sqm but n exc 4.0 sqm each complete all as specified and directed

Taking down shutters of any description not exc. 1.50 sqm each complete all as specified and directed

All as per srl item No. 82 above but exc. 1.0 sq m but n.exc 2.0 sqm each complete all as specified and directed

S&F in repair aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed.

S&F in repair for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, all as specified and directed. NOTE: During fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

S&F for second class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats.

S&F fot second class hardwood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F in repair for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S &F of stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed.

S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any height of Bldg incl necessary scaffolding etc complete all as specified and directed.

Ditto- all as per item No 94 above but figured/frosted glass complete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100mm complete all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repair 100mm butt hinges med weight cold rolled mild steel fixed with chowkats complete all as specified and directed

S&F in repair, 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F in repair 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete all as specified.

S&F in repair 125mm long aluminum anodised barrel tower bolts of extruded section and fixed with door complete all as specifed and directed.

S&F in repair 125mm long aluminum handles, fabricated type anodised and fixed with door complete all as specifed and directed.

S&F in repair for floor door stopper of brass body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed.

S&F in repair drapery curtain rod of stainless steel 20mm/25mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified.

S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw compete all as specified.

S&F stainless steel hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge

S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete.

S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S&F auto closing hinges with stainless steel screws incl taking down with existing one complete all as specified and directed

S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

Taking down shutters of any description area exc 1.0 Sqm but not exc 2.0 Sqm each and refixing in same opening including easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc complete all as specified. (S&F of new builder's hardware if specially ordered shall be measured and paid for separately)

Taking down shutters of any description area exc exc 2 Sqm each and refixing in same opening including easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified. (S&F of new builder's hardware if specially ordered shall be measured and paid for separately)

S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed with door complete all as specified

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

-Ditto- all as per item No 118, here in before but except paver blocks

S&F in repair for second class HW plain fillets, square, rectangular or triangular in section,secured with nails or brads, sectional area exc 3 and n.exc 6 sq.cm incl two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for 12mm thick mineral fibre false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, including dismentling old false ceiling boards and grid complete all as specified and as directed. Make :- Armstrong, Diaken, New Age. Note: Height of ceiling is above 5 metres.

M&L for repairing of false ceiling of any description of board fixed on existing grid and incl refixing the existing with nut & bolts etc including dismantling existing old one complete all as specified and as directed. NOTE:1. The rate quoted is deemed to be inclusive of cost of hanging wires & fasteners reqd at site.

S&F in repair ceiling board of size 600x600x9mm thick with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid complete all as specified and directed

S&F in 2mm thick fibre glass reinforced translucent corrugated or plain sheeting with coach screw and washers in roof or wall etc incl dismantling of old one complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&Fin mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed

M&L for Cutting holes in brick walls exc half brick and n.exc full brick wall in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

-Ditto- all as per item No 131 here in before but plain sheets on riges,valley gutters and similar works etc complete all as specified and directed

Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 250 & n. exc. 500 litres capacity of tank complete all as specified and directed.

Ditto- all as per item No 133 here in before, but exc. 500 & n. exc. 1000 litres capacity of tank complete all as specified and directed.

S&F in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 210gms)

S&F in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 142gms)

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of wall incl cornices, pillasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloresce salts and trading oil and greasy spots and applying one coat of oil bound distemper including filling cracks with wall putty complete all as specified and directed.

-Ditto- all as per item No 138 above but applying two coats of oil bound distemper complete all as specified and directed

-Ditto- all as per item No 138, here in before but one coat of oil bound distemper on ceiling surfaces complete all as specified and directed.

M&L for preparation of old treated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and directed by Engr-in-Charge

M&L for preparation of old treated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and directed by Engr-in-Charge

S&F in repair pull it pully system of 6 feet long. Make:Easy dry system private ltd or equivalent make all as specified and directed.

M&L for in repairs cast iron Nahani trap, with grating of diameter of outlet 75mm/100mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded stone agg) complete all as specified and as directed.

M&L for grinding of existing kota stone/ marble floor with grinding machine till desired smoothness is achieved and wax polishing the same as specified and directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Sai Construction

Gauri Associates

SHRINATH CONSTRUCTION

M/S - R K CONSTRUCTIONS

J P ASSOCIATES

Parhar Enterprise

M/S Eknath agencies

M/s.BAJRANG CONSTRUCTION

K.S.JITE AND SONS