DAY TO DAY MAINT TO B/R WORKS LIKE PLUMBING, JOINERY, MASONRY, CARPENTER WORK DOCKYARD AREA UNDER AGE B/R-II, GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Taking up or down 15mm bore steel tubing including all connections complete all as specified.

Taking up or down 20mm bore steel tubing including all connections complete all as specified.

Supply & fixing 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply & fixing 20 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply & fixing in repair 15mm bore stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions complete all as specified.

Supply & fixing in repair 15mm bore angle cocks, cast copper alloy, chromium plated with long shank and cup , high pressure with capstan head handle, screwed both ends for iron pipe or for unions complete all as specified.

Supply & fixing in repair 15mm bore Bib taps, cast copper alloy,chromium plated, fancy type screwed down, high pressure, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fix in repair shower rose brass chromium plated with swivel joints, 125 mm size, fixing to steel pipe or union complete all as specified.

Supply and fixing in repair 15mm bore pillar taps, cast copper alloy,chromium plated , fancy type, with capstan heads,screwed down high pressure with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

Supply & fixing rotational moulded polythylene water storage loft tank of 300 ltr capacity hoisted and fixed in position including 20 mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) including dismantling all connections and taking down old PVC water tank complete all as specified.

Supply & fixing rotational moulded polythylene water storage loft tank of 1000 ltr capacity hoisted and fixed in position including 20 mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) including dismantling all connections and taking down old PVC water tank complete all as specified.

Supply & fixing in repairs rotational moulded polyethylene water storage tank 500 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including approved PVC cover with locking arrangement complete all as specified.

Supply & fixing in repairs rotational moulded polyethylene water storage tank 1000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including approved PVC cover with locking arrangement complete all as specified.

Supply & fixing in repairs rotational moulded polyethylene water storage tank 2000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including approved PVC cover with locking arrangement complete all as specified.

Supply & fixing in repairs rotational moulded polyethylene water storage tank 5000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including approved PVC cover with locking arrangement complete all as specified.

Supply & fixing in repairs rotational moulded polyethylene water storage tank 7500 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including approved PVC cover with locking arrangement complete all as specified.

Supply & fixing in repair 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minium weight 142 gms) complete as directed by Engr-in-charge.

Supply & fixing in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minium weight 210 gms) complete as directed by Engr-in-charge.

Supply and fixing in repairs Waste fittings, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified

Supply and fixing in repairs 40mm bore Waste fittings, brass, chromium plated with long screwed shanks and fly nuts complete all as specified

Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each.

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Taking down shutters of any description not exc 1 sqm each

Material & labour for second class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Material & labour for 35 mm thick second class hard wood plain, framed factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I),kiln seasoned and chemically pressure treated complete all as specified.

Supply & fixing 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified.

Supply & fixing IInd class HW (Sal) glazed and Skelton shutters, 30mm thick, open rebated and prepared to receive glass gauze etc, divided into squares, with plain, chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc size of members of shutters as specified in SSR part I, section 8, clause, 8.20 (b) complete all as specified.

Supply & fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & manufacturers instructions.

Supply & fixing factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified

Supply & fixing in repairs powder coated aluminium sections (minimum thickness of powder coating 25 micron) for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, glazing clips, and rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM,rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately

Material & Labour for aluminium anodized grill DG -102 made out of 75mm thick aluminium plate of weight not less than 3.26 Kg/ Sqm and tensile strength 19 Kg/Sqmm with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per manufacturer's specifications.

Material & labour for 12mm thick toughened glass door , double shutter including providing SS pivots, door closer, SS corner supports as required, SS handle 600mm long fixed on both shutter, SS studs 1200mm long, locking arrangement and necessary SS accessories like clamps as required at site complete all as directed.

Supply & fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as directed.

Supply & fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as directed.

Supply & fixing 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

Supply & fixing 300 mm long aluminium alloy, sliding door bolt ISI marked with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified.

Supply & fixing 200 mm long aluminium anodized barrel tower bolts ISI marked of extruded section and fixed complete all as specified.

Supply & fixing 150 mm long aluminium anodized barrel tower bolts ISI marked of extruded section and fixed complete all as specified.

Supply & fixing 150 mm size aluminium alloy handles ISI marked, febricated type extruded section complete all as specified.

Supply & fixing 100 mm long stainless steel butt hinges medium weight with stainless steel hinge pin, bright finished.

Supply & fixing 75 mm long stainless steel butt hinges medium weight with stainless steel hinge pin, bright finished.

Supply & fixing MS work as in holdfast and similar articles conforming to grade Fe 410-0 and Fe 310-0.

Material & labour for applying 4mm thick finished texture mortar in CM 1:2 (Mix one part of white cement & two parts of Dholpuri clear quarts powder of 1 to 2 mm grading) incl texture finish shall be achieved with the help of hand driven machine incld preparation of old painted surface & newly plastered surfaces and making plain surface of stone masonary pattern incld irrection & dismantling of scaffolding to carrying out works upto triple stories Bldg complete all as per manufactures instructions.

Supply & fixing in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm.

Supply and fixing in repairs PVC waste pipe 32mm bore complete, all as specified

Supply and fixing in repairs PVC waste pipe 40mm bore 90 cm long complete, all as specified

Supply and fixing in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repairss low level PVC flushing cistern of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32 mm bore PVC flush pipe and connecting to WC complete all as specified.

Supply and fixing in repairs brass CP towel rail, 20mm dia, D type,60cm long complete all as specified.

Supply and fixing in repairs 125 mm dia stainless steel grating fixed in position complete all as specified.

Supply and fixing in repairs 150 mm dia stainless steel grating fixed in position complete all as specified.

Supply and fixing in repairs good quality PVC syphon kit including float set for low level flushing cistern 10 ltrs capacity complete all as directed.

Supply and fixing in repairs flush pipe of polythene of low or high density or PVC 32mm dia for low level Cistern Complete all as specified..

Checking and attending water leakage from taps or WCs or flushing cistern or urinals or wash basins or bottle traps etc and any obstruction in water supply line requiring plumber work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc including cost of petty materials like washers of all size, safeda, thread (soot), M-seal, white cement, screws, nails to make it functional and leak proof all as specified and directed by Engineer-in-Charge. Note : If any item / fitting is not serviceable that shall be replaced and the labour required is included in the quoted rate however material will be measured and paid at supply only rates.

Supply only brass spindles of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves, ISI marked complete all as specified.

Supply & fixing in repairs 15mm bore GI fittings medium grade, ISI marked i.e. Elbow, socket, nipple, union , tee etc complete all as directed .

Supply & fixing in repairs 20mm bore GI fittings medium grade, ISI marked i.e. Elbow, socket, nipple, union , tee etc complete all as directed .

Supply & fixing in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap 100 mm bore front or back inlet including provision of PCC bedding type B1, 1:2:4 ( 20 mm graded stone aggregate) including flushing pipe 32 mm dia MS chromium plated and making all connections complete all as specified.

Supply & fixing vitreous china wash hand basin white of size 550mm x 400mm flat back including cutting for and pinning in ends of brackets including brackets, 32 mm dia brass CP waste coupling and fitted to wash basin complete all as specified.

Supply & fixing in repairs of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc complete all as specified.

Supply and fix health faucet with flexible pipe (ABS Body) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook fixed to 15mm bore stop cock and wall hook complete all as specified and directed.

Supply & Fixing Single Piece vitreous china WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 370x695x795 mm, S trap-300mm including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs Rimless, Blind Installation Wall Hung WC vitreous china with UF soft close slim seat cover, Hinges, Accessories Set, Size : 370x490x365 mm S trap-300mm including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & fixing in repairs floor mounted coupled water closet cistern for coupled WC with UF soft close seat cover, hinges fixing accessories set and accessories set, size 380x660x765mm, P or S trap complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs stainless steel towel ring square with round flange of size 210mm x 210mm complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repairs stainless steel CP towel rail 600 mm long with round flange complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repairs stainless steel Soap dish of any type fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repairs Toilet paper Holder Recessed Type (Stainless Steel) complete all as specified and as directed

Supply & fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs 15 mm bore Pillar cock with lift type operating knob and base flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified .

Supply & Fixing in repairs 15 mm bore angular stop cock with wall flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair urinal pot vitreous china with Sensor Flushing, Electric Operated Size 370x390x610mm Star white(Senso Art) complete all as specified and directed

Supply & fixing in repair for Battery operated urinal sensor Flushing complete all as specified and directed by Engr-in-Charge

Supply & fixing overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system complete all as specified and as directed

Supply & fixing 8 mm thick corner glass shelves half round of average radius 200mm including fixing with D type CP brass brackets and stainless steel railing along edges of shelf complete all as specified and directed.

Supply & Fixing 600 mm size glass self assembly fancy type with frame ABS chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) fixed with chromium plated brass brackets and screw complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs 15 mm bore CP bib cock Bib Cock (Straight Line Model) With Wall Flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs 15 mm bore CP bib cock Bib Cock (Straight Line Model) two way With Wall Flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing Under Counter vitreous china wash Basin with Fixing Accessories, Size:605x430x200 mm including 32 mm dia brass CP waste coupling , 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed by Engr-in-Charge

Supply & fixing in repair table top wash hand basin vitreous china white size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket, 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

Material & labour for false ceiling work of aluminium anodized ceiling grid system of grid size 605mm x 605mm made out of aluminium anodised main tee, cross tee and wall angle of size 23.5x23.5x1.5mm thick conforming to designation 3600 given in IS 207-10985 including ceiling cleats screwed with 6 mm dia. G.I. suspender hangers (upto 1200mm length) fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Supply & fixing 4mm thick designed non asbestos fibre cement building boards of size 600mm x 600mm fixed or laid/inserted in aluminium grid false ceiling complete all as specified.

Material & labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling, complete all as specified and directed.

Supply & fixing ACP (Aluminium Composite Pahel) 3 mm thick composed of non combustible virgin LDPE core laminated and sandwitched between two fine aluminium sheets 0.25 mm thick on both sides including folding, cutting with machine and fixed in aluminium frame work made out of aluminium box section of size 24 mm x 36 mm including aluminium or stainless steel rivets, bolts and/ or screws, anchor fasteners and frame work fixed to wall with aluminium clits, screws etc complete as per manufacturers instructions. Note : Colour/pattern of ACP sheet shall be as approved by GE.

Supply & fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing.

Supply & fixing PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing shown in SSR Part II and Part I.

Supply & fixing in repairs Stainless steel plate rack of size 36" x 30"x12" as per approved design complete all as specified and directed.

Supply & fixing Stainless steel locks suitable for cupboards, drawers etc

Supply & fixing in repairs stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm complete all as specified.

Material & labour for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes, fittings to smooth flow of water from BIB TAPS/ shower/ WHB pillar tap/ Stop valves complete by Air pressure/ water gravity pressure etc. Complete all as specified & directed.

Supply & fixing in repair closed top cover for water tank of any capacity and existing type with locking arrangement complete all as spd and as directed

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe.

Supply & fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm bore

- Ditto- all as per item No 98.00 above but 75 mm bore.

Supply & fixing PVC (SWR) bends any radius of 110 mm bore

Supply & fixing PVC (SWR) bends any radius of 75 mm bore

Supply & fixing PVC (SWR) bends any radius provided with access door of 110 mm bore

Supply & fixing PVC (SWR) bends any radius provided with access door of 75 mm bore

Supply & fixing PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm bore with access door

Ditto all as per item No 104.00 above but 75mm bore

Easing and adjusting of existing doors / windows of any description like wooden, iron, aluminium etc complete all as directed at site.

Material & labour for repairing steel windows/doors by using welding machine where necessary thicknesss of each welding spot exceeding 6mm but not exceeding 9mm complete all as directed.

Supply & fixing in repairs mild steel, 300 mm long ordinary helical door spring including roller and roller plate complete all as specified.

Supply & fixing in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified.

Supply & fixing in repairs mild steel medium weight cold rolled butt hinges of 100mm size

Supply & fixing in repairs mild steel medium weight cold rolled butt hinges of 75mm size

Supply & fixing in repairs mild steel medium weight cold rolled butt hinges of 50mm size

Supply & fixing in repairs aluminium anodized, barrel tower bolt of extruded section, 100mm long, ISI marked

Supply & fixing in repairs aluminium anodized, barrel tower bolt of extruded section, 150mm long, ISI marked

Supply & fixing in repairs aluminium anodized, barrel tower bolt of extruded section, 200mm long, ISI marked

Supply & fixing in repairs aluminium handle, cast type, anodized, 100mm size, ISI marked

Supply & fixing in repairs aluminium handle, cast type, anodized, 150mm size, ISI marked

Supply & fixing in repairs aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section, 250mm long, ISI marked.

Supply & fixing in repairs aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section, 300mm long, ISI marked.

Supply & fixing in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate 140mm, ISI marked.

Supply & fixing 100 mm Size stainless steel hinges medium weight fixed with screws complete all as specified.

Supply & fixing in repair coloured powder coated Drapery Rod of aluminum 25mm inner dia including coloured powder coated aluminum decorative type brakets as approved by GE complete all as specified .

Taking down and re-fixing of old aluminum door Shutter in same opening with required repairs and fittings including glass rubber beading,door frame rubber beading and glazing clips etc and making shutters serviceable, area n.exc 4.00 sqm each complete all as specified and directed Note- Glass pane, floor hydrolic spring, handle, mortice lock and tower bolt will be measured and paid seperately.

Taking down and re-fixing of old aluminum window in same opening with required repairs and fittings including galss rubber beading, door frame rubber beading and glazing clips and making shutters serviceable, area n.exc 2.00 sqm each complete all as specified and directed

Supply & fixing in repair 12 mm thick preliminated particle board(Glossy MDF board), interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work as in panelling/partition complete all as specified and as directed.

Supply & fixing in repairs 18/19 mm thick prelaminated partical board (Glossy MDF board) exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to frame work as in cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.

Supply & fixing in repair 0.9mm thick decorative texture finish laminate type 1 , of surface finish colour and pattern as approved fixed with adhesive as per makers instruction complete all as specified and as directed.

Supply & fixing 1st class hard wood ( teak) moulding as in cornices , joints of wall panelling board etc sectional area not exc 6 sqcm including applying two coats of french polish complete all as specified and as directed..

Supply & fixing 2nd class HW (Sal ) plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails complete all as specified and directed.

Supply & fixing in repair double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting and making good to floor as per existing complete all as specified and directed.

Supply & fixing in repair door closer hydraulically regulated, aluminium extruded section body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed.

Supply & fixing in repair 100 mm size mortice lock with two lever (vertical type) brass body complete all as specified.

Supply & fixing solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing film complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding / backing coat and removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors laid over and including 20mm thick screed bed or bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), as in vertical surfaces such as skirting/dado etc., laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

M &L for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces such as skirting/dado laid over and including 15mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

Material & labour for granite stone slab 18-20mm thick machine cut,machine polished in flooring set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:4) complete all as specified .

Material & labour for 18-20mm thick granite stone slab machine machine polished in skirting/dado set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including backing coat 10 mm thick in cement mortar (1:3) complete all as specified.

Material & labour for Italian Marble stone 16 to 18 mm thick machine cut,machine polished in flooring set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:4) complete all as specified .

Material & labour for Italian Marble stone 16/18 mm thick machine machine polished in skirting/dado set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including backing coat 10 mm thick in cement mortar (1:3) complete all as specified.

Material & labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material & labour for machine pressed cheqered cement coloured tiles of size 250mm x 250mm x 20mm / 300mm x 300mm x 20 mm thick mix with grey cement and pigment in flooring set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:4) complete all as specified .

Material & labour for cutting and polishing with machine existing kota stone,mossaic tiles, /cuddpah stone etc in floor after cleaning with mild acid/detergent solution and filling/pointing the joints of tiles with white cement mixed with pigment to match the colour of tiles complete all as specified in SSR part I.

Supply & fixing in repairs Wall paper of fibrious material, nonwoven Vinyl free, fixed to wall with dry strips or with approved adhesive. Deign & pattern as approved by GE.

Supply & fixing in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete all as specified .

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

Material & labour for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4 complete all as specified.

Material & labour for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:4 and finished even and fair complete all as specified and directed.

Material and labour for preparation of concrete surface grinding by electric grinder,cleanig, brushing and applying epoxy screed of 15 mm thick in single operation in panels comprising of as self leveling compound of composition of BECK BOND DOBECOCKOT 5022, EH460, SILICA POWDER 100 AND FCA 460 in the ratio 100:100:400:10-20 by weight or equivalent in K2P chemical, polus Epothane as approved complete all as specified and directed.

Material and labour for application of one coat of solvent free Epoxy Primer coat on floor using with composition of BECK BOND EP17A. BECK BOND EP 17B in the ratio 100:50 parts by weight. Epoxy primer (or equivalent in K2P chemical, polus epthane as approved) shall be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. Primer shall be applied at coverage of 3 to 4 sqm per kilograms per coat or epoxy primer all as per manufacturer's instructions and as directed thickness of primer coating shall be as per manufacturer's instructions and as directed.

Material & labour for applying of finishing coat comprising of BECK BOND SLF36A, BECKBOND SLF 36B, CP360 AND SILICA POWDER 200 in the ratio 100:55:7:210 parts by weight using epoxy colour pigment and Hight Glossy finish over underlaycoat on surfaces of priming coat comprising of BECK BOND DOBECOCKOT 5022, EH460, SILICA POWDER 100 AND FCA 460 in the ratio 100:100:400:10-20 by weight or equivalent in K2P chemical polus Epothane as approved complete all as per manufacturer's instructions and as directed.

Material & labour for application of one coat of polyurethene based coat on floor using with composition of BECK BOND PU25A and BECK BOND PU25B in the ratio 100:10 parts by weight which shall be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. Primer shall be applied at coverage of 3 to 4 Sqm per kilograms per coat of polyurathene all as per manufacturer's instructions & as directed thickness of coating shall be as per manufacturer's instructions and as directed. Note :- for Item Nos 01 to 04:- The work shall be carried out by authorised applicator of approved firm only. Regarding sample authorised applicatgor of approved firm only.. Regarding sample approval, bidder shall visit the site of work where sample patch of coating is marked before quoting of tender. The coating chemical shall be approved by GE in consultation with users ie.e (GM) Tech of ASD. Naval Dockyard Mumbai, whose decision shall be final & binding in all respect. Necessary guarantee shall be also submitted by the contractor in writing as specified in PS.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM (1:6) and finished even and smooth with and including 1 mm thick neeru complete all as specified.

Material & labour for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement complete all as specified.

Material & labour for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

Material & labour for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

Material & labour for preparing new plastered surfaces of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof including necessary scaffolding upto G+8 storey bldg complete all as specified and directed by Engr-in-Charge.

Material & labour for preparing new plastered surfaces of wall, applying one coat of wall care putty not less than 2mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

SR Construction (BID ID -3114674)

Sachin santosh dalvi (BID ID -3118630)

SHRI SAI ENTERPRISES (BID ID -3114868)

VIPUL CONSTRUCTION COMPANY (BID ID -3116044)

Nilesh Construction (BID ID -3114640)