SPECIAL REPAIR TO BUILDING NO P-146 TWO X QTRS AT ARMY AVN SQN R AND O AT SHARIFABAD UNDER AGE I CIF K

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings,complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws as specified, Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid coloured ceramic tiles not less than 8mm thick area of each tile exc 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in colouered cement to match over 15mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed.

M&L vitrified ceramic tiles Dark/ Shade/ Double charged/ ultra charged 10mm thick rectangle polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L vitrified ceramic tiles Dark Shade /Double charged/ ultra charged 10mm thick rectangle polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM(1:4), complete all as specified and directed.

Dismantling Stone Slabs and tiles of any decription or thickness in floors, apron etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L 20mm Granite (of any type) work( table rubbed and polished) in steps, jambs , pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including15mm thick rendering in CM(1:6), complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) complete, complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in leveling coarse of flooring complete all as specified and directed.

Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc, complete all as specified and directed.

Taking down cement plastering on stone wall/brick wall etc including racking out of joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone works and precast concrete articles complete, complete all as specified and directed.

M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6, complete all as specified and directed.

M&L 10mm thick rendering in CM 1:3 on brick/concrete surface as in ceiling and finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

M&L for applying white wash of 2 coats as in ceiling including preparation of newly plastered surfaces, complete all as specified and directed.

M&L for preparation of old painted surfaces after complete removal of existing treatment and applying two coats of white wash as in ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over 3mm thick layer of wall care putty complete all as specified and directed.

M&L for preparation of old painted surfaces after complete removal of existing treatment and applying two coats of oil bound distemper over 3mm thick layer of wall care putty as in wall complete all as specified and directed.

M&L for preparing new plastered surfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

M&L 25mm outer dia 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed.

M&L 32mm outer dia 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exceeding 10cm girth but not exceeding 20cm girth in stone walls, complete all as specified and directed.

Dismantiling of water tanks of capacity exceeding 250 and not exceeding 500 ltrs including all necessary fittings complete, complete all as specified and directed.

S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I, complete all as specified and directed.

S&F, in repairs 32 mm dia PPP-R gate valves (Brass inserted) as per requirment of the site complete all as specified and directed.

S&F, in repairs 32 mm dia PPP-R Ball valve (Brass inserted) as per requirment of the site complete all as specified and directed.

S&F, in repairs Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets &32mm waste cuppling complete all as specifed and directed.

S&F in repairs Vitreous China wash down Water closet pan (pedestal pattern) "with plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) complete, complete all as specified and directed.

S&F in repair 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern, complete all as specified and directed.

Supply in fixing in repairs sink made Stainless steel sink1mm thick kitchen or laboratory with plugs, washer and wastes pipe , including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union pipe, over all size 495 x 420 mm bowl size 410mm x330mm x160mm, complete all as specified and directed.

S&F in repairs 15mm dia Bib taps cast copper alloywith fancy type chromium lated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mm size ,195 mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs, complete all as specified and directed.

S&F in repairs 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as specified, complete all as specified and directed.

Supply only Brass CP mixer fancy type chromium plated for mixing hot and cold water screwed down for iron pipe, complete all as specified and directed.

S&F in repairs 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified, complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs tubular towel rail aluminium anodised 20mm dia, D type, 60 cm long with brackets complete all as specified and directed.

S&F in repairs harrison rail/curtain rails , mild steel chromium plated with fixing brackets , stops, rollers etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame)of any description alongwith fittings n.exc 1.5sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutter from the frame) of any description alongwith fittings exc 1.5sqm n.exc 4 sqm each, complete all as specified and directed.

S&F 2nd class hard wood Plain , solid , straight chowkats and frames, wrought , framed rebated on the solid , rounded or chamfered put together with glue pinned at joints, supplied and fixed, complete all as specified and directed.

M&L for PCC Type B0-1:2:4 (using 12.5mm graded crushed stone aggregate) as in pressed steel frame, hold fasts and similars articles, complete all as specified and directed.

S&F PVC Door frames of size 50 mm x 47 mm made of 5 mm single side pr-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing, complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutters(any number of panels), with panel of timber flat on both sides (feather edged) or 12 mm thick BWP of veneered particle board medium density wood commercial face veneers fixed to chowkats, complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers, complete all as specified and directed.

S&F in position powder coated anodised aluminium three track sliding window (minimum thickness of powder coating 50 micron) of extruded modular and anodised approved colour, shade and finish aluminum section of Jindal or equavalent approved make and size of frame/rails 92mmx31.75mmx1.9mm thick (Wt not less than 1.174 Kg/Rm). The shutter comprising of bearing bottom and top of size 48mmx20mmx1.30mm thick (wt not less than 0.539 kg/Rm) interlocking section of size 50mmx29mmx1.28mm thick (wt not lesst than 0.594 Kg/Rm) and hand sides of 50mmx20mmx1.5mm thick (wt not less than 0.571 Kg/Rm) including fixing of 5mm thick clear black plain glass of saint Gobain or equivalent make in two shutter and stainless steel wire cloth 0.36mm nominal dia of wire, averaging width of aperature 1.4mm fixed in one shutter including approved quality neoprene gasket, bottom roller, fixtures, fastenings, and accessories like PVC taflon bearing of MITI or approved made, 6" star locks, sainless steel screws,joining cleat for fixing etc complete all as specified and directed. Note:- The rate is inclusive of cost of 5mm thick sheet glass and stainless steel wire cloth.

S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe 410 (or) Fe-310-0, complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled 100mm size ISI marked, complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled 75mm size ISI marked, complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size, complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised 100mm size, complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as fixed in repairs, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving exc 15 cm thick (below or above ground level), complete all as specified and directed.

Cleaning the side/ bottom of sunken floor before applying 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in padding of sunken floor finishing the surface even and smooth by using extra cement by using WPC 3% by weight of cement (i.e Pidilite/Aquatyte/ Dr fixite etc WPC shall be measure separetly), complete all as specified and directed

Supply only integral waterproofing compound, complete all as specified and directed.

M&L for 15mm thick rendering in 1:3 CM with using 3% WPC as in sunken portion and finishing the surface even sand smooth without using extra cement and applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per Sqm in sunken floor including cleaning surfaces complete all as specified and directed.

M&L for cement concrete type E - 2, 1:5:10 (using 40mm graded crushed stone aggregate) as in sunken floor. complete all as specified and directed.

Dismantiling of Cement asbestos /CI/PVC pipe of size 100mm dia and below, complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) bends with or without access door complete all as specified and directed.

S&F in repairs 75 mm PVC (SWR) bends bends with or without access door complete all as specified and directed.

S&F in repairs PVC 110mm (SWR) vent cowal, complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of re-inforced cement concrete as in beam /Slab and similar suspended work complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20mm crushed stone aggregate) as in precast RCC manhole / septic tanks ,drain,covers including all form work and setting in CM 1:4, complete all as specified and directed.

M&L TMT steel bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips confomring to Gd I IS-432, complete all as specified and directed.

Material and labour for cement concrete 1:2:4 Type B-1(using 20mm graded crushed stone aggregate) as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S&F 15mm thick 2nd class soft wood clean sawn boarding as in eves board fixed with nails in any situation complete all as spd and directed.

Dismantiling of fillets unframed work as in, rails, posts, rafters, purlins, etc under 40 sqcm in section, complete all as specified and directed.

M&L 2nd class soft wood, plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exceeding 6sqcm but n. exc 13.0 sqcm complete all as specified and directed.

Supply & fixing 18/19mm thick prelaminated particle board interior grade both side laminated with decorative choice laminations fixed with screws to timber frame work as in shelves/ kitchen cupboard/almirah shutters complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width all as directed.

M&L for applying two coats of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width all as directed.

Dismantling boarding /false ceiling of any description fixed in any posn with nails, complete all as specified and directed.

Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 12mm thick Gypsum board of size 600mm x 600mm as in ceiling fixed on GI frame work complete all as specified and directed.

S&F in repairs stainless steel plate rack 1mm thick of size ( 750x750x250mm) grade of sheet shall be 304AISI including fixing arrangment with mild steel nut and bolts including drilling and fixing wooden/plastic cleats, complete all as specified and directed.

Dismantiling of unframed work timber scantiling 40 sqcm and over in section in any position complete all as specified and directed.

S&F 2nd class hard wood clean sawn as in handrails rounded or shaped with moulded faces in straight length and fixed including fixing arrangment complete all as specified and directed.

M&L french polishing on surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, light and power socket) complete with fittings and fixtures such as switches, ceiling rose, pendents, regulators, socket, lamp holders brackets, bulk head fitting, tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and also making good disturbed surfaces of wall, floors etc, complete all as specified and directed.

M&L for One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) wiring with FRLSH cable PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC conduit with all accessories and earth continuity connected to common earth duly accommodate modular box surface/ flush type with modular white cover plate with frame for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall, match to existing wall surface etc complete all as specified and directed.

All as per item 98 above but one bell point controlled by one No bell push, complete all as specified and directed.

All as per item 98 above but one multipin 5/6 amps socket outlet on same board complete all as specified and directed.

All as per item 98 above but one multipin 5/6 amps socket outlet on independent board complete all as specified and directed.

All as per Item 98 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing), complete all as specified and directed.

S&F modular switch piano button flush type, single pole one way 6 amps complete all as specified and directed.

S&F modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch piano button flush type, single pole one way 16 amps complete all as specified and directed.

S&F Modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified and as directed.

S&F Fan step modular regulator, 1 module, complete all as specified and directed.

S&F Modular Bell push 6A 1 module one way, complete all as specified and directed.

S&F White cover plate with frame, 2 module, complete all as specified and directed.

S&F White cover plate with frame, 3 module, complete all as specified and directed.

S&F White cover plate with frame, 4 module, complete all as specified and directed.

S&F White cover plate with frame, 8 module, complete all as specified and directed.

S&F Metal flush box 1/2 module, complete all as specified and directed.

S&F Metal flush box 3 module, complete all as specified and directed.

S&F Metal flush box 4 module, complete all as specified and directed.

S&F Metal flush box 8 module, complete all as specified and directed.

S&F in repairs electric ding dong bell, 230 volt AC, single pole, complete all as specified and as directed.

S&F in repairs LED Lights fitting 20 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, complete all as specified and directed.

S&F in repairs for angular type Lamp holder PVC policarbonate type with back plate including Lamp 7Watt complete all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fa, complete all as specified and directed.

S&F in repairs sheet metal enclosures for MCBs, single pole and neutral, 12 ways 240 Volts double door type complete all as specified and directed.

S&F in repairs distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 6 way, complete with appropriate size copper bus bar complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site complete all as specified and directed. Note: MCB's will be measured and paid seperately under relevent items

S&F in replacement SPN 40 to 63 Amp, type 'C'10KA, 240 Volts, complete all as specified and directed.

S&F in replacement MCB SP 5 to 32 Amp, 'C'10KA, 240 Volts, complete all as specified and directed.

S&F in replacement 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN 40 to 100 AMP poles and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 including dismantling old. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

S&F in repairs for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 10 Sqmm and drawing through and including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 10 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed. Note : Two runs of 10 sqmm wire, one run of 10 sqmm earth wire including 1RM of PVC conduit shall be considered one unit.

Notes :- An amount of Rs. 66,920.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S CLASSIC JK SUPPLIERS (BID ID -3269924)

M/S BHAT TRADERS (BID ID -3268758)

JK BUILDERS AND ENGINEERS (BID ID -3258845)