REPAIR/MAINT TO FLOORING, JOINERY, RCC WORK, TILES, SANITARY FITTINGS AND OTHER MISC B/R WORKS OF CENTRAL INSTITUTE IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.

M&L for hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for Providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M & L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.

S&F 38 mm wide and 3 mm thick glass dividing strips as in flooring complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing even complete all as specified and directed.

Materials and Labour for 1st quality joints free Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7m/450x350x7 mm thick as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Materials and Labour for 1st quality joints free non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:6) screed bed, set and jointed with grey cement slurry & pointed with grout of matching shade, incl cement mortar bedding complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Materials and Labour for 1st quality joints free coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting or dado, etc set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Vitrified Ceramic dark shade tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20 mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed. Note: Design, shade and pattern of fixing of kota stone shall be as directed and approved by GE

M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. Note: Design, shade and pattern of fixing of kota stone shall be as directed and approved by GE

Material and labour for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed. Note : Design, shade and pattern of paver block shall be directed and approved by the GE.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface fair face of brickwork or concrete surfaces including finishing surface even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick plaster in cement mortar(1:4) on external of concrete or brick work in two layers (10mm thick 1st layer + 5mm thick finishing layer) mixed with water proofing compound as per manufacturer’s instructions on top layer finish even & smooth without using extra cementr complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item here-in-after.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, chhajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat alkali resistant primer complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004 ,Alkali & fungal resistance , dirt resiatance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90ltr/ 10 sqm over new surface,complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying three coats white wash complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall and applying a layer of wall care putty and two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surface of ceilling applying three coat white wash complete all as specified and directed.

M&L for complete removal of existing surface preparation of old plastered surface of wall for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004 ,Alkali & fungal resistance , dirt resiatance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90ltr/ 10 sqm over new surface,complete all as specified and directed.

Material and labour for preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat alkali resistant primer complete all as specified and directed,complete all as specified and directed.

M&L for complete removal/scrapping of existing treatment of plastered surfaces and applying one coat of primer over a layer of wall care putty and two coat of oil bound distemper , complete all as specified and directed.

Material and labour for preparation old surfaces of walls by blooming down orsteel wire brusing scraing down smoke spot, moulds moss , efflorescent salts , trading oils & greasy spots and applying two coat of white wash on walls including cornices, pilasters ect complete all as specified and directed.

All as per item No 34.00 mentioned here-in-above and applying two coat on celling surface complete all as specified and directed.

Demolition of brick work built in cement mortar or stone masonary including all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified and directed.

M & L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in cement mortar (1:6 ) complete all as specified and directed.

M & L for brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.

Demolition of RCC ( other then ground floor )piller, beams landing, chajjas slabs sleves & similar suspended work.and removing unserviceable material exc 100 mtr ,complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (20mm graded stone aggregate) in columns, pillars, piers etc, complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (20mm graded stone aggregate) for Chajjas complete as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Use and waste of formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girder,bressummers, lintels, cantilevers, shelves including supports, overhangs etc, complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down wooden shutter not exc 1.00 each and removing to store complete all as specified and directed.

Taking down wooden shutter exc 1.00 Sqm but not exc 2.00 each and removing to store complete all as specified and directed.

Taking down wooden shutter of any description exc 2.00 each and removing to store complete all as specified and directed.

Taking down wooden shutter not exc 1.00 refixing in same opening, complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F factory made 35 mm thick 2nd hardwood plain framed panelled shutters (three panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed.

S&F 2nd class hard wood 30mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (b), supplied and fitted to chowkhats complete all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm single side prelam PVC sheet with edges painted to match with prelam sheet, reinforced with MS square tube, fixed in opening, complete as per manufacturer specification and drawing ,complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.complete all as specified and directed by Engr-in-Charge.

S&F providing 30mm thick factory made UPVC moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top bottom & lock rail MS frame shall have a coat of metal primer of approved make & manufacturer.the inside panel shall consist of 20mm thick multichamber hollow pvc section of 1mm wall thk bounded using solvent cement /cynoacrylate adhesive with 5mm thk moulded pvc sheet manufactured by an ISO 9001-2008 certified company complete all as specified and directed.

S&F Louvred UPVC windows are made out of frames section 60X60X2.5mm multi cavity section suitably suitable reinforced by GI and welded in corners and glass can be fixed on aluminum louvred blades complete all as specified and directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and Fix,steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including taking down existing unserviceable one including making good disturbed surfaces as per existing specfication complete all as specified and directed.

S&F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n. exc. 0.50 sqm in each pane, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 , complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.

S&F aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

S&F stainless steel butt hinges, medium weight, and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed.

S&F stainless steel butt hinges, medium weight, and fixed with screws or with welding to existing MS frames, 75 mm size, ISI marked, complete all as specified and directed.

S & F mild steel helical / ordinanary rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding , riveting etc (ISI Marked) ,complete all as specified and directed.

S&F in repair MS.PVC caoted drepery rods of 25 mm dia of PVC coated in curtain rods complete all as specified and directed.

S & F MS PVC sheeted/power coated bracket size 150mm made to shape suitable for holding curtain/drapery of rod of 25mm dia fixed with PVC rawl plugs and MS steel screws complete all as specified and directed.

S & F coloured conical end balls dia not less then 50mm and PVC coated made to shape suitable for fixing as end of curtain/dropery rods complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exceeding 200 cu cm and n. exc. 500 cu. cm each, complete all as specified and directed.

Supply and fixing mild steel flat iron of size 25 X 6 mm work as in hold fast and similar small articles including required cutting , bending and fixing complete, mild steel conforming (Fe-410-0 or Fe-310-0) complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore ,complete all as specified and directed.

Fixing only in steel tubing and connection 15 mm dia bore ,complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors ,complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed.

Fixing only in steel tubing and connection 20 mm dia bore complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

Supply & Fixing in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 750 x 600 mm including screws complete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S & F in repair PVC waste pipe 32mm dia for wash basin and sink 01 meter long complete all as specified and directed.

S & F in repair soap dish, vitreous china white, approximate size 160 x 160 x 90 mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repair toilet paper holder, vitreous china box type fixed to wall with chromium placed brass screws complete all as specified and directed.

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.

S&F in repair 15 mm dia Stop valves, chromium plated with long shank and cup concealed type cast copper alloy screwed down ,high pressure, with crutch of butterfly handle, screwed both ends for brass ferrule complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe and brackets complete all as specified and directed

S&F in repair 15mm dia Bib taps, cast copper alloy cromium plated fancy type with crutch or butterfly handle, screwed down, high pressure screwed for iron pipe or for brass ferrule and fixed ,complete all as specified and directed.

S & F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding,including making good to existing (floor / Tiles). complete all as specified and directed.

S&F in repair Vitreous china Water closet (padestal pattern) complete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and including connection to GI pipe line complete all as specified and directed.

S & F in repair wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant, complete all as specified and as directed.

S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts , complete all as specified and directed.

S&F in repair chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair vitereous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern ,complete all as specified and directed.

S&F in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms) complete all as specified and directed.

S & F tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cm long between flanges and including brackets complete all as specified and directed.

S & F in repair 15mm bore Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc) of any thickness incl ridges hips valleys as in roof coverings complete all as specified and directed.

M&L for 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

All as per item No 120.00 mentioned here-in-above but except sheeting complete all as specified and directed.

M&L for fibre cement two piece adjustable serrated ridge 6mm thick for corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked bolts complete all as specified and directed.

All as per item No 122.00 mentioned here-in-above but except ridge complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel as in trusses (framed), trussed purlins crane gantries, rails and joist , channel angle or tee sections including all necessary cutting ,welding etc complete with confirming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed.

S&F wind ties for roof including securing bolts, flat iron fillets (for securing weather boarding with screw bolts and nuts) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 including painted with one soap coat of zinc chromate primer paint. (including preparation of surface at contractor's workshop before fabrication)

All as per item No 126.00 mentioned here-in-above but fixing only ,complete all as specified and directed.

Dismantling of timber scantlings fillets , rails ,posts ,rafters , purlins , etc under 40 sq.cm in section, in any position complete all as specified and directed.

M&L for second class hard-wood, timber fixed and clean sawn, in scantlings complete all as specified and directed

All as per item No 129.00 mentioned here-in-above but except timber ,complete all as specified and directed.

Dismantling of wall or ceilling boards of any thicness including cover fillets complete all as specified and directed.

M&L providing and fixing Gypsum board 12 mm thick in ceilling fixed with screw as per manufacture instruction complete all as specified and directed.

All as per item No 132.00 mentioned here-in-above but in wall,complete all as specified and directed.

M&L for applying wall care putty 1 mm thick on ceiling surface ,complete all as specified and directed.

M&L for applying wall care putty 1 mm thick on wall surface ,complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall and applying and two coat of oil bound distemper complete all as specified and directed.

M&L for prepration of newly plastered surfaces of ceiling and applying and two coat of oil bound distemper complete all as specified and directed.

M&L for solid pvc wall lining consisting of 5mm thick wood grain printed single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified in drawing ,complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as specified in drawing ,complete all as specified and directed.

S&F wooden boarding 2nd class hard wood clean sawn 50mm thick with butt joints complete all as specified and directed

All as per item No 140.00 mentioned here-in-above but except boarding complete all as specified and directed.

M&L for Preparation of wood & wood based materials, new or old of any description and girth, not otherwise described and treated with one coat of creosote oil complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.

M&L for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.

S& F anodised aluminium snap grid (605X605mm ) frame work for false ceiling with all necessary aluminium angle & Tee aeeangement with and incl fixing cleats including dismantling ,complete all as specified and directed.

M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof truss by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long, complete all as specified and directed.

S&F 6 mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screwsincluding ,complete all as specified and directed.

S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m for doors, windows, ventilators or framing for panelling with one or more rebates including grill work joining cleat for fixing etc. complete all as specified and directed.

S&F Powder Coating Anodised aluminium door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F Powder Coating Anodised aluminium window and ventilator shutters side hung/sliding type without sash,(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 nos) hinges type B-21 100mm long (2 nos) suitable handle (1 nos) complete all as specified and directed.

M&L for 5.5 mm thk froested Sheet glass, ordinary quality and glazing with brass screws in square exc 0.5 sq. m in each pane complete all as specified as directed

M & L for pre-laminated 9 mm thick particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or fixed in ceiling complete all as specified and directed.

S&F in repairs, floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed.

S&F in repair mortice lock verticle type 100 mm 4 lever brass fixed in aluminum door complete all as specified and directed.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.

M&L for PCC(1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding , finished fair and even without using extra cement ,complete all as specified and directed.

M&L for PCC(1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed.

M & L for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) using extra cement and water proofing compound, complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item.

Material & Labour for preparation ne surfaces of roof and applying two coats of Polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @ one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. Notes:- (i) As per description of theis item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of Polyurethene(PU) acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in building/Structure of any height.

S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12 mm fixed properly with suitables nails for repair of cracks at various locations in wall ,beams , chajja ,facia , slab , lintel etc including taking down plater of cracked portion and cutting grooves for receiving wire mesh and making good the area by rendering with cement mortar (1:3) and finally to match the surface with adjacent surfaces by applying white wash/ distemper/cement base paint as applicable,complete all as specified and directed.

Taking down rain water pipes of any description set in cement mortar (internal dia of pipe upto 110 mm) dia, complete all as specifed and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls ,complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls ,complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with access door ,complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius with access door ,complete all as specified and directed.

SUPARNA TRADING

KAZI SAHABUL ALAM