Loading
Loading…
Loading…
Tender Value
₹2.4 L
EMD Value
₹11,915
Closing Date
5 Oct 2026, 6:55 pm4d left
EXECUTIVE ENGINEER REW BUDGAM
RDD COMPLEX BUDGAM
Construction of first floor of CSC over existing ground floor CSC at Khanda
2026_RDPR_325393_46
NIT_78_REW_Budgam_2026_27
Open Tender
Civil Works
Percentage
30 days
BK PORA
Please refer Tender documents.
3 documents required · 3 mandatory
₹200
EXECUTIVE ENGINEER REW BUDGAM
₹11,915
21 Sept 2026
21 Sept 2026
6 Oct 2026
21 Sept 2026
5 Oct 2026
21 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | P/L in position of Reinforcement cement concrete (1:1.5:3 ) stone aggregate 20mm nominal size aggregate excluding the cost of centring and shuttering all work upto plinth level | 1.2 | cum | 9,395.7 | ₹11,274.84 |
| - | Reinforcement for RCC works incld. straightening bending cutting placing in position and binding all complete (TMT Bars) | 122.94 | kg | 115.14 | ₹14,155.31 |
| - | Centring and shuttering incl strutting propping etc and removal of form work suspended floors, roofs, landings, balconies and access platforms | 8.78 | sqm | 718.2 | ₹6,305.8 |
| - | Brickwork with FPS brick of class designated in 1:6mix in superstructure above plinth upto floor five level | 5.69 | cum | 7,877.4 | ₹44,822.41 |
| - | Extra for brick work in superstructure above plinth level upto floor v level (by manual means) | 5.69 | cum | 1,455.65 | ₹8,282.65 |
| - | Half brick masonry with common burnt clay (non-modular) bricks of class designation Cement mortar 1:3 ( 1 cement : 3 coarse sand) | 8.99 | sqm | 947.25 | ₹8,515.78 |
| - | Providing and fixing aluminum work for doors, windows, ventilators and partitions (frame) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Powder coated aluminum (minimum thickness of powder coated 50 microns). Incl. shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, 4mm Thick ACP Sheets & all other accessories (Handles, Tower-Bolt, Al-Drop etc.) - (14-Guage Material) | 6.04 | sqm | 4,521.51 | ₹27,309.92 |
| - | Providing/ fixing in position Pre cast Cement concrete Jali 1:2:4: mix reinforced with 6mm dia mild steel wire incl. cement mortat of mix 1:3 mix. | 1.12 | sqm | 1,493.9 | ₹1,673.17 |
| - | 12mm thick cement plaster 1:6(1cement:6fine sand | 44.89 | sqm | 266.2 | ₹11,949.72 |
| - | P/A white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete | 9.27 | sqm | 172.2 | ₹1,596.29 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.11 MB
BOQ_1099329.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .