Electrical Works

Amount

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End.

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End

Renewal by Supply and fixing of 4 feet LED 20W fitting with LED 20W tube (Higher end) complete with TW round blocks on wal+D20l or ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by supply and Fixing of 2 x 22W 4 Feet LED Fitting with 20W LED Tube Light for T8 Fitting (Single side) on with conduit pipe suspension PVC unsheathed copper leads from terminals with suitable necessary connections. (DATA-1)

Renewal by Supply & Fixing of PLANO 2X2 PLR 36W LED 865 TAPS 2x2 LED false ceiling fitting with suitable necessary connections. (Philips / Havells / Jaquar / Equivalent) (DATA - 2)

Renewal by supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb.

Renewal by supply and fixing of Smartbright BRPO62 LED 68CWSLC S1 PSU With 32mm dia GI Pipe Complete on the Existing Post/Wall with Synthetic Moulded Compound Box for street Light with necessary Connection. (Make. Philips, Havells, Luker or equ). (DATA - 3)

Renewal by supply & Fixing of Crompton make Hi-speed 1200 mm (48”) AC ceiling fan complete with fan step regulator with 1.5mtr down rod. (DATA - 4)

Renewal by supply and fixing of 375mm (12") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making of the wall. (DATA - 5).

Renewal by supply & Fixing of 16” Oscillating type Havells make Wall mounted fan on the wall.

Renewal by Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50c/s single phase AC supply on suitableTWboard with push switch.

Renewal by Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End.

Renewal by Supply and fixing of 1 no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End.

Renewal by supply and fixing of 3 nos.6A two module socket, 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no.16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End.

Renewal by supply and fixing of 32A DP MCB (legrand Make) with suitable Sheet steel enclosure box in wall with earth connection.

Renewal by Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only.

The incoming 250A MCCB should be connected to the bus with same size 3x25x6mm fixed copper flat and 125A MCCB should be connected to the bus by3x25x3mm fixed copper flat. The switch should be separated by 6mm thick hylem sheet separators and properly double earthed as per IE rules. CEIG specifications. The panel should be powder coat paint of approved colour approved by the site officer and also the danger board. The capacity of the MCCB size of incoming and outgoing cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of an angle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection (DATA - 8)

Renewal by supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 Vgrade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour.

Renewal by Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour.

Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Renewal by Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.

Renewal by Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion with suitable colour.

Renewal by Supply and run of 4 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour.

Renewal by Supply and run of 4 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion with suitable colour.

Renewal by supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Renewal by Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Renewal by Supply and fixing of brass cable gland for 4 x 16 sq.mm. LTUG armoured cable with earth connection.

Renewal by Supply and providing cable end termination of 4 x 16 sq.mm. PVC insulated SC unsheathed copper conductor with necessary copper cable sockets by crimping etc with electrical connection complete. (DATA-9)

Removing and re erection of existing split type AC unit ( Dismantling and re- installation charges)

Renewal by Supply and laying of 5/8” & 3/8” copper refrigerant pipe with 2.5sqmm-3 core power cord wire & etc.,

SS AGENCIES (BID ID -1558281)