Providing additional power sockets, data points and necessary wirings for The Wadhwani School of Data Science at 6th floor of NAC-II building inside IITM premises

Amount

Point wiring in PVC conduit, with modular type switch/regulator wiring for light point/ fan point/ exhaust fan point/ call bell point/ 6 amps switched socket with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI / PVC box, ceiling rose, round block and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required and instructed by the engineer incharge. Group C

Supplying and fixing of 6 amps. socket controlled by 6 amps. one way switch modular switch/ socket on a modular plate & G I/PVC switch box including connections as required

Supplying and fixing of 6/16 amps. socket controlled by 16 amps. one way switch modular switch/ socket on a modular plate & G I/PVC switch box including connections as required.

Supplying and fixing of 2x 5 Amps socket controlled by one 15 Amps.Switch + 5 amps. socket controlled by one 5 amps. switch

Supplying and drawing of following sizes FRLS PVC insulated copper conductor single/ multi strand cable in the existing surface/ recessed cable management system / casing capping/PVC /steel condiut as required.

3 run of 2.5 sqmm FRLS PVC insulated copper conductor single

3 run of 4 sqmm FRLS PVC insulated copper conductor single/ multi strand cable

6 run of 4 sqmm FRLS PVC insulated copper conductor single/ multi strand cable

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed medium class PVC conduit as required

2 runs of 2.5 sq.mm and 1 run of 2.5 sqmm of FRLS PVC insulated copper conductor.

2 runs of 4.0 sq.mm and 1 run of 4 sq.mm of FRLS PVC insulated copper conductor,

4 runs of 4.0 sq.mm and 2 runs of 4 sq.mm cable.

4 runs of 6.0 sq.mm and 2 runs of 6 sq.mm cable.

4 runs of 10.0 sq.mm and 2 runs of 6 sq.mm cable.

4 runs of 16.0 sq.mm and 2 runs of 6 sq.mm cable.

Supplying, installing, testing and commissioning of 1200 MM sweep super efficient, 5 star rated BLDC ceiling fan with 3 leaf , 5 speed completely pre wired up to the terminal block complete as required.The sample to be got approved before procurement.

Supplying, installation, testing and commissioning of pre wired following type of FTL /CFL fittings complete with all accessories and Tubes/CFL etc on wall/ceiling/false ceiling including connections with 1.5 sqmm FRLS PVC insulated single core copper conductor wires and earthing etc as required.The LED fittings will be supplied CDL/WW/NW as instructed by the Engineer in charge

Crompton LDLSRN28-CDL Model 1200mm x 28-Watt LED Batten 3000K/ 6500k or equivalent in Philips

Crompton Make Model POLARIS NEO-I LCTLRNE-36-FO-CDL 600mm x 600mm 36W square panel light with 6500K or equivalent in Philips

Supplying and fixing of 100 x 50 MK premium base & lid CMS with accessories including end caps, flexible internal/external corners flat angles,Flat tee, joint cover wherever necessary with cable divider, required type of modular box etc as per the site requirements

Supplying and fixing of 50 x 50 MK premium base & lid CMS with accessories including end caps, flexible internal/external corners flat angles,Flat tee, joint cover wherever necessary with cable divider, required type of modular box etc as per the site requirements

Supply and installation of Cat -6A 24 port straight jack panel with rear metal cable manager,Fully loaded ,Transparant clear lebel cover

Supply and fixing of Cat6A ( 4 Pair, 23 AWG Solid copper Conductor with FR Grade, Printed Meter Marking ) patch chord - 1 metre

Supply and Erection of 9U wall mountable server rack with necessary accessories including fixing of data switches/servers etc., as required.

Supplying, Erection in the modular of single Port Shuttered Faceplate for/with CAT 6A I/O module with back box.The rate shall be include nessary accessories like screw, proper labelling includung crimping with color code, etc ., as complete with all respects complying with relevant standard specification as mentioned in the Technical Specfication , as directed by the Engineer-in-charge.

Supplying, Erection in the modular of single Port Shuttered Faceplate for/with CAT 6 I/O module with back box.The rate shall be include nessary accessories like screw, proper labelling includung crimping with color code, etc ., as complete with all respects complying with relevant standard specification as mentioned in the Technical Specfication , as directed by the Engineer-in-charge.

Supplying and drawing of UTP 4 pair CAT 6A LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. Single run of cable for Data to support 10G

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. Single run of cable

SITC of Wifi access points HPE-Auruba :IAP-505 along with all necessary accessaries

Supply, installation, testing and commissioning of Layer 2 managed switch with 48 ports (RJ-45) of make and model No. CISCO/C9200-48T-E complete with supply. The switch shall have 1 GB port to communicate with other switches including Passive components inbuilt 2 SFP ports including SFP modules, rack mountable termination accessories like Pigtails/ LIUs/ Convertors/ Splicing equipment, Patch panel, Patch Cord, etc complete as per specifications and as required

Supply, installation, testing and commissioning of Layer 2 managed switch with 24 ports (RJ-45) of make and model No. CISCO/C9200L-24T-E complete with supply. The switch shall have 4 x 1 GB port to communicate with other switches including Passive components inbuilt 2 SFP ports including SFP modules, rack mountable termination accessories like Pigtails/ LIUs/ Convertors/ Splicing equipment, Patch panel, Patch Cord, etc complete as per specifications and as required

Supply, installation, testing and commissioning of Layer 2 managed switch with 24 ports (RJ-45) of make and model No. CISCO/C9200L 24- port PoE+ , 4 x 1G , Network Essentials with secondary power supply

Supplying and fixing following company made sheet steel, MCB VTPN distribution board, 240V or 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc as required. ( without MCB/ RCCB/ Isolator).

4 Way (4+12), Double Door

8 Way (4+24), Double Door

Supplying & fixing of following ratings, miniature circuit breaker in the existing MCB/MCCB DB's complete with connections, testing and commissioning etc as required

6 - 32 Amperes Single pole MCB

6 to 32 Amperes triple pole MCB

40 Amperes triple pole MCB

63A Four pole MCB

SITC of 63A TPN (Schenider) tap off box / plug in box 1.6mm thick sheet steel enclosure duly painted with powder coated on existing Over head busbar system complete with TPN disconnector, connections, earthing as required.

SITC of LEGRAND NUMERIC – KEOR HPE 100kVA (3Ph-3Ph) 720VDC, Floor Mounted with External / Identical Isolation Transformer Online Double Conversion UPS System including MS rack for housing the batteries along with interconnection cables with SNMP & PRS Kit.Warranty: 2 Years for UPS

SITC of 12V/150Ah/60Nos of SMF Batteries for battery backup of 30mins. Battery Make: EXIDE SMF VRLA Warranty: 2 Years for SMF Batteries.

Floor Cable Cover/surface mount Cord Protector 3 Channels for cover the cable crossing, wirings to the iland tables.

Supply and laying of single core 95sqmm copper PVC FRLS Single Core Flexible Industrial power cable, 1100 V in a suitable size PVC Coated Steel Wire Reinforced flexible Hose Pipe.

Supply and making end termination with suitable copper lugs for 95sqmm copper PVC FRLS Single Core Flexible Industrial power cable

Supplying and fixing of the 4 pole,250A MCCB's in the existing MV panel with necessary incoming and outgoing connections without enclosure and including extended bars /wires if required/ terminal spreaders.

Supply and fixing of Sheet Metal MCCB Enclosure, Powder Coated.suitable for fixing 250A 4P MCCB