UPGRADATION OF SED UAV LAB GROUND FLOOR OF AVIONICS BUILDING No P23 AND REPAIR RENOVATION AT SIMEL BLDG 3RD FLOOR FOR LCA FMS AT ADE UNDER GE I RD EAST BANGALORE

Amount

S&F powder coated aluminium frame and/or shutter for doors and windows of any section and type, ventilators, partition/work station cubicles etc., with one or more rebates including joining cleat, rubber beading for fixing, star or suitable lock etc complete all as specified and as directed

Supply and fix for heat absorbing glass of 3 mm thick of any size complete all as specified and as directed

S&F 9 mm thick Prelaminatd particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

S&F Aluminium body door closer hydraulically regulated designation No 2, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, fixed as in repairs complete all as specified and as directed

S&F floor door stopper of aluminium body and toungue, anodized with hard drawn steel spring 150mm, fixed as in repairs complete all as specified and as directed

Material and labour for two coat synthetic enamel paint on existing painted wall including necessary preparation complete all as specified and as directed

S&F venetian blinds, vertical type, 100 mm slot width of approved fabric and powder coated aluminium top railsetc complete all as specified, including dismantlilng old damaged one completecomplete all as specified and as directed. Note:The colour,design and shade shall be as approved by GE.

M&L for one coat of oil bound distemper on ceiling including preparation of existing treated surfaces complete all as specified and as directed

M&L for two coats of oil bound distemper on new plastered surfaces of wall over a coat of primer including necessary preparation complete all as specified and as directed

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

M&L 15 mm thick external plaster in CM 1:4 on fair faces of walls , finishing the surfaces even and smooth w/o using extra cement.

M&L 10 mm thick internal plaster in CM 1:6 on other than fair faces of walls , finishing the surfaces even and smooth w/o using extra cement complete all as specified and as directed

M&L Preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) and removal of debries to a distance not exceeding 100 Metre complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises

M&L for 50 mm thick PCC 1:3:6 type C-1 using (20 mm graded crushed stone aggregate) as in sub base etc complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in floors/paving finishing the surface even and smooth without using extra cement concrete complete all as specified and directed.

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick dark shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Dismantling of Wall blankets (wall paper), any thickness, and cover fillets complete all as specified and directed

M&L 15 mm thick internal plaster in CM 1:6 on other than fair faces of walls , finishing the surfaces even and smooth w/o using extra cement complete all as specified and as directed

Material and labour for preparation of old/new wall surfaces by complete removal of existing treatment, preparing wall surfaces and applying two coats of exterior plastic emulsion paint like Apex in asian paint or its equivalent over a coat of priming paint including 2mm thick wall care putty with necessary sand papering to obtain smooth finishcomplete all as specified and directed

S &F in repairs 40mm wooden boarding in floor of 2nd class hard wood with butt joints and fixed with nails including cutting and laying in existing shape and size or as direceted by EIC.

M & L in repairs 2 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting with adhesive complete all as specified and as directed

Hacking out old broken glass (any thickness, size, qualityor description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones.

S&F sheet glass, 4.8 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square exc. 0.5 sqm in each pane complete all as specified and as directed

S&F in repairs perforated particle board/tiles 12mm thick in ceiling flat or sloping, for insulation and accoutic purposes, 60x60 cm in size, fixed with screws to timber/GI/Aluminium framework with screws, complete all as specified. Make:- Everest or equivalent.

Supplying and fixing in Anodised aluminium snap grid frame work with 20X25 mm 'T' and 20X20mm 'L' section with grid size of 605X605mm including with necessary 3.15 mm GI wire as in suspenders etc complete as specified and directed by EIC

S&F fixing black/golden colour solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including taking down existing damaged films complete all as specified and as directed

S & F Aluminium anodised sliding door bolt 250mm length with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

Taking down and easing adjusting and refixing in same opening shutter of any description exc 2 sqm each .

Taking down carefully the existing aluminium point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including metal flush boxes of suitablesize and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.

(a) One Light point controlled by one way switch

(b) One Fan point controlled by one way switch

(c) One 3 pin socket point 5 Amps on same board.

(d) One 3 pin socket point 5 Amps on independent board.

(e) For one buzzer point controlled by one switch

All as per item No 34 here-in-before, but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 1.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps soket outlet independently.

Supply & fix switch modular type single pole 1 way 5 Amp 230 volt complete as directed.

Supply and fixing of Modular socket 6 A,230 V make legrand cat part 573470 or equivalent in anchor,crabtree, Havells

Supply and fixing of Modular socket 16 A,230 V make legrand cat part 573471 or equivalent in anchor,crabtree

Supply and fixing of Modular switch 16 A,230 V make legrand cat part 573410 or equivalent in anchor,crabtree, Havells

Supply and fixing of ceiling rose surface type 3 terminals 65x20mm compelete all as specified

Supply and fixing of sheet metal enclosure powder coated, Distribution board, Double Door type, VTPN MCCB 100 Amps as Incomer, 8 way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Cement spill protector, Door earthing, complete Make INDOASIAN, Model Optipro F1+ 36 or equivalent of HAVELLS/ L & T/ LEGRAND

Supply & fixing of MCCB 4 pole, 100 Amps 415 Volts 25 KA for fixing in VTPN DB

Supply & fix MCB DB, TPN 4 Way, 415 volts 10 KA rupturing capacity complete all as directed.

Supply & fix 'C' Curve MCB TPN 32 Amps 240 volts 10 KA rupturing capacity complete all as directed Make : Legrand or eqivalent in C&S/Scheinder/Havells

Supply & fix MCB SPN 6 to 40 Amps 240 volts 10 KA rupturing capacity complete all as directed Make : Legrand or eqivalent in C&S/Scheinder/Havells

Supply & fix 'C' Curve MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as directed Make : Legrand or eqivalent in C&S/Scheinder/Havells

Supply and fixing of motor starter power unit suitable for satarting of AC, 20 Amps Power unit Make : Havells, CAT REF : AHLO202504

M&L for sub main wiring complte with 4 runs of 16 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 2 runs of 10 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note :-(i) One run of PVC conduit, Four runs of cable and Two run of earth wire shall be measured and paid as one unit.

M&L for sub main wiring complte with 4 runs of 10 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 2 runs of 6 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note :-(i) One run of PVC conduit, Four runs of cable and Two run of earth wire shall be measured and paid as one unit.

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 4 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note :-(i) One run of PVC conduitfour two runs of cable and one run of earth wire shall be measured and paid as one unit.

M&L for sub main wiring complete with 2 runs of 4.00 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 2.50 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified. Note :-(i) One run of PVC conduit two runs of 2 cable and one run of earth wire shall be measured and paid as one unit.

S&F Power console made out of aluminium insulation material poly carbonate sheet of colour as approved in standard length comprising of 5 Nos 5/15 Amps 5 pin electric socket controlled by one switch (modular type) with one control MCB 20 Amps SP and indication lamp fitted, internal wiring including fixing of console on pedestal made out of MS frames, etc of suitable size all as directed. Make :- Anchor roma.

M & L for Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge not less than 1.50 Mtrs below normal ground level, connected to galvanised iron strip 25 x 4 mm, by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no 5 connected to the earthing test point all as specified and all as directed by Engineer incharge including testing and submission of test reports. Note : The rates quoted are inclusive of copper earth strip upto the standard length as specified in the SSR part -1. However additional length will be measured and paid seperately in respective item.

M & L for galvanised iron strip earth continuity main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn on walls of size 25 x 4 mm all as specified and directed.

Supply and fixing DLP U-PVC Cable trunking systems and acessories snap on trunking 80 x 50 mm supplied without cover, Legrand Cat no : 010412 80mmx50mm PVC Trunking

Supply and fixing of Flexible cover only, full cover size width 65 mm suitable for 80mmx50mm PVC Trunking Make : Legrand Cat no. : 010521

Supply & fixing of LED 36 Watts surface light fitting 2 x 2 fitting Make: CG, Model : POLARIS, Cat Ref : LCTLSN - 36 CDL or equivalent make in Havells/philips/wipro

Supply and fixing of LED light 36 watts, slim down light durable LED batten with decorative end caps, Make : CG, TRIM LINEA, CAT REF LDL - 36 CDL

Supply and fixing of Modular fan regulator step type 100 w,230 V make legrand cat part 373416 or equivalent in anchor,crabtree, Havells

Supply & fix bell push switch modular flush type 5 Amp.

S&F call bell, ding dong type and connecting up completely.

Supply and fixing of sheet metal enclosure powder coated, Distribution board, Double Door type, VTPN MCCB 125 Amps as Incomer, 8 way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Cement spill protector, Door earthing, complete Make INDOASIAN, Model Optipro F1+ 24, 812042 or equivalent of HAVELLS/ L & T/ LEGRAND

S &F in replacement of Distribution Board, TPN 8 way, 240V, double door type.

S &F in replacement of Distribution Board, SPN 8 way, 240V, double door type.

Supply & fixing of LED 36 Watts surface light fitting 2 x 2 fitting Make: CG, Model : VECTOR, Cat Ref : LCTLRF1- 36 CDL or equivalent make in Havells/philips/wipro

Supply and fixing of Suspended Linear in sleek design LED luminaire 36 watts, Make : CG, Model : TREND I Cat No. : LCPL54-36-CDL or equivalent make in Wipro/philips/ Havells

Supply and fixing of LED light 40 watts, slim down light durable LED batten with decorative end caps, Make : CG, TRIM LINEA, CAT REF LDL - 40 - CDL

Taking down old existing Ceiling fan 1200/1400 mm sweep single phase,Servicing of painting of Ceiling fans and refixing and connecting with necessary cable from ceiling rose or connector to fan and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed

Taking down old existing Exhaust fan 300/450 mm sweep single phase,Servicing of Exhaust fans and painting of ceiling fans and refixing and connecting with necessary cable from ceiling rose or connector to fan and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed

M & L for earthing complete with copper earth plate of size 600 x 600 x 3.15 mm buried directly and preferably vertically in ground with top edge not less than 1.25M below ground level connected with copper earth strip of 20 x 3 mm connected to the earthing test point all as specified and all as directed by Engineer incharge including testing and submission of test reports. Note : The rates quoted are inclusive of copper earth strip upto the standard length as specified in the SSR part -1. However additional length will be measured and paid seperately in respective item.

M & L for copper earth continuity main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit of size 20 x 3mm all as specified and directed.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface for laying of conduits & cables on floors/walls/etc including making good of surfaces with cement plaster

Supply and fix industrial plug and socket Triple pole and neutral enclosure with a 3 pin and earth plug with socket complete with one TPN MCB 32 Amps.

Supply and fix industrial plug and socket Triple pole and neutral enclosure with a 3 pin and earth plug with socket complete with one TPN MCB 63 Amps.

MAJ CONSTRUCTIONS

ABHISHEK CONSTRUCTIONS