Estimate of laying new distribution system of Saleran Dam to maintain designed CCA of Saleran Dam in District Hoshiarpur

Amount

Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil outside/inside the town involving lead upto 15 meter complete in all respect.

All classes of soil except rocky

Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work

Providing, Laying , fixing & jointing of. uPVC socket type Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 200mm o/d pipe of 2.5Kg. /sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) B. Class PN-1.6 as per IS (d) 200mm i/d Sluice Valves flanged.

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing, cost of nut bolts & rubber insertion all carriages complete. (d) C.I Single air valve screwed (Size 50mm)

Providing & fixing ISI Marked 200 mm Dia. Alfa Valve

Cement concrete 1:4:8 with stone ballast 40mm gauge, mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:2:4 With stone ballast or shingle, mixing by mechanical means using concrete mixer volumetric type

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Cement plaster 1:4 12.50mm thick

Supplying and Fixing uPVC Socket of 6kgf/cm2Pressure confirming to relevant ISCode with latest Amendments, if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge 200mm.

Providing & fixing 200 mm Dia. uPVC. Bend 90° (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing 200 mm Dia. uPVC.Equal Tee (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Supply & fixing of service saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge.

200 mm x 50 mm

Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. B) uPVC Pipe 6 Kgf/cm2 b) 50mm i/d

Providing & fixing 200 mm Dia. uPVC Bend 45° (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing 200 mm Dia. D-joint (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Any Other CSR Item

Walia Enterprises

ARIHANT PIPES