Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC Accept | |
| 2 | L2₹38.5 L+₹3.0 L (8.59%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹38.7 L+₹3.3 L (9.24%)Rejected-Finance 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹38.9 L+₹3.4 L (9.69%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹39.5 L+₹4.1 L (11.6%)Rejected-Finance 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 6345001
REPAIR TO STONE MASONRY, CHAJJA, FACIA, POINTING, RCC JALLIES ETC AT TECH AREA AND CERTAIN UNITS UNDER AGE BR-I OF GE (A) JAISALMER
2023_MES_597176_1
8294/23-24/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹98,000
Yes
8 Jul 2023
20 May 2023
24 Jun 2023
20 May 2023
17 Jun 2023
3 Jun 2023
Amount
Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance complete all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing complete all as specified & directed by Engineer-in-Charge.
M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-Charge
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning and including removing the existing paver blocks including removing of debries out side MD land complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
S & F chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cement and pigments, set jointed in neat cement slurry as in floors/path etc laid over and including 15mm thick screed bed or bedding in CM (1:4) complete.
M&L for ceramic tiles exterior grade 300 x 300 x 7-8mm set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed 15mm thick in CM (1:6) and roughening of exc concrete surfaces complete all as specified & directed by Engineer-in-charge.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in subbase of floors & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L for non skid ceramic tiles colour joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified & directed by Engineer-in-Charge.
M&L light shade, vitrified ceramic tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding in CM (1:6) complete all as specified and directed by Engineer-in-charge.
M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
S&F glazed ceramic coloured tiles of size 450mmx300mmx 7mm thick (Joint free) on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM 1:4 as backing coat etc complete all as specified and directed by Engineer-in-charge.
Demolition of Brickwork or stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed by Engineer-in-charge.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge. Note :- Serviceable stone obtained from demolition shall be used.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.
M&L for keyed pointing in cement mortar (1:4) to squared rubble masonry, Jodhpur type, coursed or un coursed all as specified & directed by Engineer-in-charge.
M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.
Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of stone masory surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engineer-in-charge.
M&L for special treatment for sunken portion of WCs/bath and toilet executed in the following stages :- Stage 1:- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc complete. Stage 2:- Providing 10mm thick plaster in CM 1:3 mixed with integral water proofing chemical of Dr Fixit in the proporation/quantity all as per manufacturer's instrucitons. Stage 3:- Apply two coats of water proofing elastomeric liquid membrane of Dr Fixit or by brush application of STP (The surface after painting one coat shall be allowed to dry for 8 hours before application of next coat) all as per Manufacturer's instructions.
ITEM NO. 22.00 CONTD... Stage 4: Rendering 10mm thick in CM 1:3 mixed with integral water proofing chemical of Dr Fixit in the proportion/quantity all as per Manufacturer's instructions. Stage 5: All CI joints shall filled with mixture of cement fine sand and shalicrete R of STP Ltd or integral water proofing chemical of Dr Fixit all as per Manufacturer's instructions. Stage 6: Making holes in wall and fixing 600mm long 40mm dia medium grade GI spout for draining the surplus water if any. Sgate 7: Carry out ponding test for 48 hours to ensure water tightness of rapaired sunken portion.
Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :-
(a) 15 mm bore
(b) 20 mm bore
S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :-
(a) 15 mm bore
(b) 20 mm bore
Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :-
(a) 15 mm bore
(b) 20 mm bore
S&F, in repair, tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.
S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.
S&F in repair Swivel shower rose 75mm size with arm 195mm long with bend of 45 degree with flange of PTMT any colour fixed complete all as specified & directed by Engineer-in-charge.
S&F in repair CP grating (with & without hole) for Nahani trap and floor trap of size 100 mm dia fixed complete all as specified & directed by Engineer-in-charge.
S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long fixed complete all as specified & directed by Engineer-in-charge.
S&F, in repair, white/ black plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed by Engineer-in-charge.
S & F in repair Vitreous china wash down water closet pan (Pedestal pattern), white (EWC) with necessary P/S Trap including jet spray and seat cover complete all as specified and directed by Engineer-in-charge. Note :-Rate quoted by the Contractor shall deemed to inclusive of EWC, P/S trap, Jet spray, seat cover & necessary fittings).
S&F in repair vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (Excluding flushing cistern and flush pipe) including 'S' or 'P' trap and making good to the floor complete all as specified & directed by Engineer-in-charge.
S&F in repair 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified & directed by Engineer-in-charge.
S&F in repair vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass, chromium plated, coupling, waste pipe, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair, 15 mm bore, bib tap, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
S&F in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair, 15mm bore, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified & directed.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.
M&L rendering 15mm thick in 1:6 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L rendering 10mm thick in 1:4 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L preparation of new plastered surfaces of any description and applying two coats of oil emulsion distemper over a coat of wall putty on wall and chalk whiting prepara-tory to distempering complete all as specified & directed by Engineer-in-charge.
Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete all as specified & directed by Engineer-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-charge.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed by Engineer-in-charge.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-charge.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed by Engineer-in-charge.
S&F 125 mm size aluminium handle, cast type, anodiesed complete all as specified & directed by Engineer-in-charge.
Resecuring without taking down chowkats or frames (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.
Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified & directed by Engineer-in-charge.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 and n exc 2 sqm each complete all as specified & directed by Engineer-in-charge.
S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.
S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample complete all as specified & directed by Engineer-in-charge.
S&F in repair, 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding if required for fixing in case of pressed steel chowkat complete all as specified & directed by Engineer-in-charge.
S& F in repair of galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples fixed complete all as specified & directed by Engineer-in-charge.
S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes and including hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames, stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.
S&F in repair, aluminium (Die cast) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed by Engineer-in-charge.
S&F for floor spring double action hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MS heavy duty complete all as specified & directed by Engineer-in-charge.
S&F in repair, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.
S&F steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing (push pull or manual type) as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete and including taking down existing rolling shutter of any thickness complete all as specified & directed by Engineer-in-charge.
S&F steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing (gear operated type with bevel gear box and crank handle) as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete and including taking down existing rolling shutter of any thickness complete all as specified & directed by Engineer-in-charge.
S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws and including dismantling existing roof sheeting complete all as specified & directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 complete all as specified & directed by Engineer-in-charge.
Taking down unserviceable collapsible steel gates of any description any size height upto 4 mtrs complete all as specified and directed by Engineer-in-charge.
S&F of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified & directed by Engineer-in-charge.
M&L for 35mm thick precast cement concrete (1:3:6) type C-0 (using 12.50mm graded stone aggregate) louvers and jallies (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 and including dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.
M& L Providing type B1 (1:2:4) (20mm graded aggregate) precast ce- ment concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps,columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), withplain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match and set in CM 1:4 complete all as specified and directed by Engineer-in-charge.
S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long including 12 mm medium density fibre board, exterior grade, fixed to timber framework with screws and including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work & Fibre board complete.
Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified and directed by Engineer-in-charge. Note : Demolition should be done by chiselling.
M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc., with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope complete all as specified and directed by Engineer-in-charge. (Note :- Supply only water proofing compound shall be measured & paid separately).
Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge.
M&L for providing 3 mm thick APP modified memberane over RCC roof with the following specifiations :-
ITEM NO. 74.00 CONTD... (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) Providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm . (ii) Net wooven polyster weight >160 gm/Sqm (iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm
ITEM NO. 82.00 CONTD... (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm Note:- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. (d) Over the membrance provide a finishing with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane
AMBEY MAA CONSTRUCTION COMPANY
MARUDHARA CONSTRUCTION COMPANY
M/S MAYA CONSTRUCTION COMPANY
M.D. CONSTRUCTION CO.
S K TRADER
M/s Shri Inder Construction Company
Leelashah Enterprises
M/s Sati Jasnath Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .