REPAIR HARDSTANDING INTERLOCKING CHEQUERED TILES RAINWATER PIPES BOUNDARYWALL SECURITYWALL WALLCLADING, PARTATION FALSE CEILING JOINERY PLUMBING AT VARIOUS LOCATIONS WNC(O)MESS IMSC STEELYARD ROBORTCOMPLEX CERTAIN OTHER BUILDING AGE BRI GE(NW) NOFRA

Note : 1. The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building (16th floor building) & including provision of necessary scaffolding & safety measures. (a) Uniform for all deployed staff in duty supervisor as approved by GE. (b) Functional tools & plants shall be carried by tradesman all time for attending any site. (c) Necessary ladder / cloth or any other material reqd. (d) Removal of Debris out side Mod land and site clearance immediately before leaving site. (e) Safety eqpt to be carried all time. (f) Scaffolding wherever reqd deemed to be included in quoted rates. (g) Welcome of 1 qtr will not take more than 03 days. (h) Contractor is solely responsible for any defect or after working situation arises, take leaving fresh water tap open or throwing of debris through window or shaft, Penalty levied as mentioned above. (j) In case of non-adherence of any of above fine/ penalty to be carried as under:- (i) 1st Time - Rs 200/- (ii) 2nd Time - Rs 500/- (iii) 3rd Time - Warning to contractor. (k) In case of 3 warning to contractor, it will be reflected in WLR for slow progress. (l) After painting cleaning of all floors, glass and Fixurniture by own arrengement. (m)(i) Complaint registered upto 11:00 AM & Emergency complaint to be attended same day. (ii) Complaint Team consist of 02 Carpenters, 01 Plumber, 01 Mason alongwith required helpers.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed.

M&L for PCC of type D2, 1:4:8 (using 40mm graded stone aggregate) 100mm thick as in sub base,foundation filling and mass concrete complete all as specified and directed.

M&L ready mix M30 PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in foundation, fillings and mass concrete complete all as specified and directed.

Demolition of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 80mm thickness M-40 Grade with grey cement and no pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L for Chequred cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & no pigments with red and yellow colour including 20mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed.

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) including ss clamping and MS scaffolding.

S&F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete including ss clamping and MS scaffolding all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete including ss clamping and MS scaffolding all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including ss clamping and MS scaffolding complete all as specified and directed.

S&F PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

S&F PVC (SWR) branch piece, single single 'Y' equal or unequal 110mm dia complete all as specified and as directed

S&F PVC (SWR) branch piece, single single 'Y' equal or unequal 75mm dia complete all as specified and as directed

S&F PVC (SWR) branch piece, double 'Y' equal or unequal 110mm dia complete all as specified and as directed

S&F PVC (SWR) branch piece, double 'Y' equal or unequal 75mm dia complete all as specified and as directed

Taking down cast iron pipes of any size or pattern at any position including all fittings such as bends, heads (measured overall as fixed along the centre line over fiitings and accessories) including removing vegetation growth around pipes as required, making good to surface to match with eixisting including necessary scaffolding etc complete all as specified and directed.

S&F 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls all as specified and directed.

S&F 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls all as specified and directed.

S&F CI bends (any radius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of 100mm sizes all as specified and directed.

S&F CI bends (any radius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of 75mm sizes all as specified and directed.

S&F CI branch pieces single (equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches of 100mm sizes all as specified and directed.

S&F CI branch pieces single (equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches of 75mm sizes all as specified and directed.

.-Ditto- al as per Srl ietm No.25 above but double socket for 100mm size.

.-Ditto- al as per Srl ietm No.26 above but double socket for 75mm size.

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

M&L fo brick work with sub class 'B' bricks old size, full or half bircks works straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified.

Taking down cement plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement) including Sagol finish complete all as specified.

M&L for rendering 5mm thick in CM 1:3 on ceiling surface complete all as specified and as directed

M&L for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4)) , finished even and smooth without using extra cement complete all as specfified and directed.

M&L for preparing new plastered surfaces of ceiling etc and applying two coats of oil bound distemper complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with 2mm thick pop wall care putty on plastered surfaces complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old unserviceable flase ceiling, and decorated precast beading as approved by GE complete all as specified and directed.

Taking down chowkats or frames exc 1.5sqm but n.exc 4sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

-ditto- as per Item No. 39 above but n.exc 1.5 sqm complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed.

M&L for aluminium window four track/ three track/two track/, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles,glass/aluminium wire mesh/floor spring/concealed lock including connected items, with and including, with 4.5mm thick glass and wire mess including taking down old aluminiam section complete all as specified and directed.

Taking down aluminium windows shutters only of any size and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats, new rollers of any size of existing make and also refixng the locks & roller in existing postion with and including refixing the window shutters in same opening also rate including glass/aluminium wire mesh/floor spring/concealed lock complete all as specified and directed.

S&F in repairs concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

Tools & labour for Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F in repairs aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed.

S&F extruded aluminium alloy handles fabricated type anodized 150 mm size.

S&F in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & complete all as specified and directed.

S&F in repairs 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium/wooden doors as per manufacturers instruction all as specified and directed.

S&F 35mm thick second class hard wood, plain framed, paneled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated .

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides both face is covered with deco rative face veneer with lipping /frame to match all as specified and directed

S&F IInd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints.

S&F mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0.

S&F mild steel Butt hinges medium weight, cold rolled and fixed 100 mm long .

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F in repairs 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repairs 250 mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and complete all as specified and directed.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repairs for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

M&L for repair, prelaminated 18/19mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work including all necessary fittings such as knob,hinges,lock,for cupboard and others complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

S&F 2nd class hard wood 35 mm thick Glazed and skelton shutter open rebated and prepare to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with and cut and mitered beads, for securing glass sizes of members of shutters as specified in SSR Part I Sec 8 Clause 8.24(a) supply and fitted to chowkats inclding IInd class hardwood plain, fillets, wrought, square, rectangular or triangular in section exc 13 & n.exc 25 sqcm secured with nails or brads of size for securing wire mesh and glass complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

S&F in repair aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

S&F in repair 200mm long aluminium anodized brass barrel tower bolts of extruded sections complete all as specified and directed.

S&F in repair 300mm long aluminium anodized brass barrel tower bolts of extruded sections complete all as specified and directed.

S&F in repair extruded Brass handles fabricated type polished 150 mm size complete all as specified and directed.

S&F in repair double action Hydraulically regulated floor spring made up of minimum 1.25mm thick, aluminium alloy sheet with foundation box, main body with stainless steel cover, govering pivot made brass, othr parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair 125mm size double action spring hinges, mild steel wire spring, stove enamelled black, complete upto any floor height all as specified and directed.

S&F in repair 8 to10 mm thick, plain glass for door, shutters/partitions/windows etc with and including fitting and fixtures such as wooden/aluminium frame,rubber beading etc complete all as directed

S&F in repairs 12mm thick, toughened glass for door, shutters, partitions, sheves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots,foundation boxe,spring,and all other connected items etc complete all as directed

M&L for taking down and refixing the toughnen glass door including replacing with new all connected items such as double action Hydraulically regulated floor spring made up of minimum 1.25mm thick, aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made brass, other parts made of mild steel heavy duty and toughen glass of existing thickness also wooden planks granite,fixed with smart care materialacomplete all as specified and as directed.

Taking up and down 15 mm bore GI tubing and connection and removing from site complete all as specified and directed.

_Ditto_ all as per Sl item No.79 here in before but 20 mm bore complete all as specified and directed.

_Ditto_ all as per Sl item No.79 here in before but 25 mm or 32 mm bore complete all as specified and directed.

S&F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe including ss clamping and MS scafolding all connected items such as elbow,union,tee,ferrules of any size etc complete all as specified and directed.

_Ditto_ all as per Sl item No.82 here in before but 20 mm bore of pipe

_Ditto_ all as per Sl item No.82 here in before but 25 mm bore of pipe

S&F in repair 32mm dia PVC waste pipe for WHB,kitchen shink and urinals complete all as specified and directed.

S&F fixed in repairs table top Wash hand basin vitreous china size 600 x 400x150 mm jaquar cat part number KUS-WHT-35931PM or equvalent including bottle trap 32mm size with 300mm & 190mm long wall connection pipes & wall Flange jaquar cat part number ALD-769L300x190 or equavelent and all necessary connected items such as waste coupling 32mm size full thread with 130 mm height jaquar cat part number ALD-727L130 or equvalent etc. complete all as specified and directed.

S&F in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

S&F in repairs fancy type pillar taps / cock with extension body jaquar cat part number FLR-5021M or equvelent chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed 15 mm bore of pipe compleat all as specified and directed.

S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed.

S & F Vitreous china water closet, couple closet, single piece WC with pp soft close seat cover , hinges, Duel flush cistern Fitting, Fixing Accessories and accessories set of size 380X700X665mm P trap -180mm of Jaquar Cat No CNS-WHT-851P180SPP or equivalent as approved complete with and including all accessories, fixed in repairs upto any floor height all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair brass CP towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified.

S&F in repair Aluminium anodised towel rod, 20mm dia, complete all as specified.

S&F in repair Aluminium anodised Brackets for towel rail, 20mm dia, complete all as specified.

S&F in repair toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws CP brass fixed to walls etc, complete all as specified and directed.

S&F in repair fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe for 25 mm bore complete all as specified and directed.

S&F in repair for angle stop valve of brass platinum coted any colour high pressure screwed for iron pipe for 15mm bore complete all as specified and directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

S&F in repair two way bib cock with wall flange upto any floor height all as specified and directed (make -Jaquar Cat No FUS-29041 or equivalent as approved)

S&F in repair fancy type bib taps chromium plated 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule, complete all as specified.

S&F corner glass shelf with bracket fixed in repairs upto any floor height all as specified and directed (Make- Jaquar Cat No. ACN-1173 or equivalent as approved)

Supply and fix in repair 300 ltr white rectangular syntex PVC water storage tanks (Loft tank) of capacity following sizes with complete fitting including fixing 03 Nos tank nipples of GI/CPVC with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete upto any floor height complete all as specified and directed.

Supply and fix in repair 300 ltr PVC profile sheet suitable for PVC Loft tank of capacity following sizes including fixing aluminium/ PVC channel around the profile incl removing of tank and refixing the same complete upto any floor height complete all as specified and directed.

Supply and fix in repairs 15/20/25 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI/CPVC pipe of following sizes including necessary GI/CPVC fittings upto any floor height complete all as specified and directed.