Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96,300Accepted-AOC GOLE GUJRAL JAMMU JAMMU | ₹96,300 | L1 | Accepted-AOC Ist Lowest |
| 2 | L2₹1.0 L+₹7,200 (7.48%)Rejected-Finance NOT AVAILABLE | ₹1.0 L+₹7,200 (7.48%) | L2 | Rejected-Finance Not Lowest |
| 3 | L3₹1.1 L+₹10,500 (10.9%)Rejected-Finance | ₹1.1 L+₹10,500 (10.9%) | L3 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | N B Engineering and Electric Works L2 | M/S VERMA ELECTRICAL L3 | M/S GOPAL ELECTRICAL L1 |
|---|---|---|---|---|---|---|
| 1.00Repair to 90HP motor along with other works at LIS Padoh. | ||||||
| 1.01 | Repair to 90HP three phase induction motor of Unit no. I at LIS Padoh by way of decoupling the damaged motor from pump after disconnecting all the electrical connections. Dismantling of the motor at site by way of unscrewing of nuts/bolts and then extraction of rotor from the stator, extracting out old damaged/burnt copper winding from the stator, cleaning the slots of stator with appropriate chemical cleanser. Complete rewinding of the stator with providing/winding and fitting of new copper wires of requisite gauge and specifications at site. Providing and fitting of new F class insulation, packing material. Varnishing the stator winding with superior quality varnish and drying the stator winding completely. P/F of bearing to Driving and Non-Drive Ends of the motor as per sample. Reassembling the motor with the help of nuts/bolts/screws after inserting rotor inside the stator of the motor and checking the continuity of each phase. Refitting/installation of 90 HP motor of Unit no. I on the base frame and coupling it with pump and making all the electrical connections. Testing of the motor on no load and then on full load for its smooth operation.
Job includes repair to 200mm dia foot valves of Unit-I, Unit-II and Unit-III at LIS Padoh by way of dismantling foot valves from suction pipes in sump tank. Dragging out from sump with the help of manual labour using tools and tackles. Dismantling of foot valves, cleaning and replacing the leather sheets cut to size along with rubber sheet for flanges with p/f of new nuts and bolts along with washers. Re-assembling and fitting the same to suction pipes in sump tank with the help of manual labour using required tools/tackles and testing them.
Providing of gland packing (size 10mm)-2 kg and grease- 2 kg for smooth operation of pumping units installed.
Complete job involves cost of material, skilled and unskilled labour charges, transportation charges, headload charges, hire charges of tools/tackles required for the job inclusive of all taxes as applicable and rebate on old parts including copper. Complete Job. | 1 | Complete Job | 1,03,500 ₹1,03,500 | 1,06,800 ₹1,06,800 | 96,300 ₹96,300 Lowest |
Tender Value
₹1.1 L
EMD Value
₹2,150
Closing Date
5 Jun 2026, 12:00 pmClosed
Executive Engineer MICD Jammu
Office of The Executive Engineer MICD Jammu
Repair to 90HP motor along with other works at LIS Padoh
2026_IFC_311030_1
enit no MICD/J/09 of 2026-27 dtd 26/05/2026
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
10 days
Padoh, Katra
Please refer Tender documents.
9 documents required · 9 mandatory
₹200
Yes
Executive Engineer MICD Jammu
₹2,150
Yes
Office of The Executive Engineer MICD Jammu
20 Jun 2026
26 May 2026
5 Jun 2026
26 May 2026
5 Jun 2026
26 May 2026
29 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repair to 90HP motor along with other works at LIS Padoh. | |||||
| 1.01 | Repair to 90HP three phase induction motor of Unit no. I at LIS Padoh by way of decoupling the damaged motor from pump after disconnecting all the electrical connections. Dismantling of the motor at site by way of unscrewing of nuts/bolts and then extraction of rotor from the stator, extracting out old damaged/burnt copper winding from the stator, cleaning the slots of stator with appropriate chemical cleanser. Complete rewinding of the stator with providing/winding and fitting of new copper wires of requisite gauge and specifications at site. Providing and fitting of new F class insulation, packing material. Varnishing the stator winding with superior quality varnish and drying the stator winding completely. P/F of bearing to Driving and Non-Drive Ends of the motor as per sample. Reassembling the motor with the help of nuts/bolts/screws after inserting rotor inside the stator of the motor and checking the continuity of each phase. Refitting/installation of 90 HP motor of Unit no. I on the base frame and coupling it with pump and making all the electrical connections. Testing of the motor on no load and then on full load for its smooth operation.
Job includes repair to 200mm dia foot valves of Unit-I, Unit-II and Unit-III at LIS Padoh by way of dismantling foot valves from suction pipes in sump tank. Dragging out from sump with the help of manual labour using tools and tackles. Dismantling of foot valves, cleaning and replacing the leather sheets cut to size along with rubber sheet for flanges with p/f of new nuts and bolts along with washers. Re-assembling and fitting the same to suction pipes in sump tank with the help of manual labour using required tools/tackles and testing them.
Providing of gland packing (size 10mm)-2 kg and grease- 2 kg for smooth operation of pumping units installed.
Complete job involves cost of material, skilled and unskilled labour charges, transportation charges, headload charges, hire charges of tools/tackles required for the job inclusive of all taxes as applicable and rebate on old parts including copper. Complete Job. | 1 | Complete Job | 100 | ₹100 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
Tendernotice_2.pdf
PDF • 0.16 MB
BOQ_1006867.xls
BOQ • 0.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .