Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
17 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE (AF) Ambala
HQ CWE (AF) Ambala Cantt, 133001
CWE/AF AMB/SAR-T35/2026-27 PROVN OF EPOXY FLOORING TO HANGERS AT ARC AT AFS SARSAWA UNDER GE AF SARSAWA
2026_MES_799457_1
CWE/AF AMB/SAR-T35/2026-27
Open Tender
Civil Works
Item Rate
180 days
Sarsawa
For MES enlisted contractor Class C Category a i and for un-enlisted contractor refer NIT
9 documents required · 9 mandatory
₹1,000
GE (AF) Sarsawa
₹1.8 L
Yes
19 Nov 2026
19 Nov 2026
19 Dec 2026
19 Nov 2026
17 Dec 2026
11 Dec 2026
19 Nov 2026 - 10 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 3 | M&L 10mm thick (consolidated thickness) sand cushion with clean river sand, duly clear of residual, organic and deleterious material, spread evenly to uniform thickness, laid over existing surface complete all as specified & directed. | 1.35 | Cum | - | - |
| 6 | M&L raking out old existing filling in joints of width exceeding 19mm but not exceeding 25mm and upto required depth by special tools like cutting blades/machines and joints cleaned thoroughly with application of compressed air making free from all the loose material i.e. dirt, dust, grease, existing sealing compound, filler board, as required including stacked material of existing compound racked up foul depth (upto 45mm) of joints etc. to entire satisfaction of Engineer-in –charge and filling the joints with the polyurethane joints sealant single compound component using mechanical means to a depth exceeding 18mm but not exceeding 20mm (depth above the backup rod ) with minimum performance guarantee of 10 years and minimum movement accommodation factor (MAF) +/-30 % confirming to the requirement to BS 5212 and EN -14575 -2003 for hydrolysis/water resistance test including two coat of primer and filling the balanced racked depth of the joint with the backup materials i.e. closed cell polyethylene to ensure tight packing so that no gaps or void exist at the top of backup material speared by bond break of suitable size HD10 filter in position where required and appling masking tape on edge of joint to prevent accidental slippage of sealant on top surface to give a neat finish to the sealant and remove the making tape after sealant is applied complete all as per manufacturer’s instructions and complete all as specified & directed | 40 | Ten RM | - | - |
| 7 | M&L raking out old existing filling in joints of width exceeding 26mm but not exceeding 30mm and upto required depth by special tools like cutting blades/machines and joints cleaned thoroughly with application of compressed air making free from all the loose material i.e. dirt, dust, grease, existing sealing compound, filler board, as required including stacked material of existing compound racked up foul depth (upto 50mm) of joints etc. to entire satisfaction of Engineer-in –charge and filling the joints with the polyurethane joints sealant single compound component using mechanical means to a depth exceeding 20mm but not exceeding 22mm (depth above the backup rod) with minimum performance guarantee of 10 years and minimum movement accommodation factor (MAF) +/-30 % confirming to the requirement to BS 5212 and EN -14575 -2003 for hydrolysis/water resistance test including two coat of primer and filling the balanced racked depth of the joint with the backup materials i.e. closed cell polyethylene to ensure tight packing so that no gaps or void exist at the top of backup material speared by bond break of suitable size HD10 filter in position where required and appling masking tape on edge of joint to prevent accidental slippage of sealant on top surface to give a neat finish to the sealant and remove the making tape after sealant is applied complete all as per manufacturer’s instructions and complete all as specified & directed. | 50 | Ten RM | - | - |
| 8 | ᰀ글अM&L raking out old existing filling in joints | 60 | Ten RM | - | - |
| 9 | 敨挠湯牴捡潴吠獥楴杮漠汦硥牵污猠牴湥瑧桳污敢挠牡楲摥漠瑵愠灳捥晩敩湡潣瑳漠桴慳敭椠敤浥摥琠敢椠据畬敤湩焠潵整慲整ਠ椨⥶吠敨挠湯整瑮景挠浥湥⁴灳捥晩敩Ɽ椠桴業楮畭潣瑮湥⁴湡湩挠獡桴畱湡楴祴漠散敭瑮爠煥極敲潭敲愠捣牯楤杮琠灡牰癯摥搠獥杩業ⱸ渠瑯楨杮攠瑸慲猠慨汬戠慰摩映牯椠据敲獡摥挠湯整瑮漠散敭瑮愠摮爠瑡獥搠敥敭潴戠湩汣摵摥映牯椠据敲獡摥挠浥湥⁴潣瑮湥턊ℂ�∂谀⌃ꔀ␅㸀ࠁ畓灰祬漠汮⁹潰祬獥整牴慩杮汵牡映扩敲愠敳潣摮牡⁹敲湩潦捲浥湥ⱴ㘠ㄯ洲潬杮眠瑩楣捲浵挠物汣楤浡瑥牥㌠ⴰ㔳洠捩潲Ɱ唠⁖瑳扡敬污慫楬爠獥獩慴瑮敤楳湧摥映牯洠汥楴杮瀠楯瑮漠㐲ⴰ㘲‰敤牧敥挠汥楳獵☠栠癡湩灳捥晩捩朠慲楶祴ㄠ㌮‴潴ㄠ㐮ⰰ洠湩浩浵琠湥楳敬猠牴湥瑧景㌠〰灍潣灭敬整愠汬愠灳捥晩敩…楤敲瑣摥†ļ ձĈ䴀䰦瀠敲慰慲楴湯漠硥獩楴杮挠湯牣瑥畳晲捡潦灡汰楹杮㘠浭琠楨正䔠潰祸倠汯牕瑥慨敮⠠偅⥕映潬牯湩湩汣摵湩牧湩楤杮捳牡晩楹杮汣慥楮杮漠畳晲捡牦浯搠獵ⱴ搠物ⱴ洠楯瑳牵…潦敲杩慭整楲污映潲桴汦潯Ⱳ愠汬映潬牯潴戠汣慥敲祢洠慥獮漠捳畲扢牥捡摩椠捴楨杮猠慨汬戠潤敮琠桴汦潯潦汬睯摥戠⁹污慫楬敮眠獡…桴湥琠敨猠牵慦散猠慨汬戠汣慥敮祢瀠瑯扡敬眠瑡牥眠獡䄠瑦牥琠慨⁴桴汦潯桳污敢挠敬湡摥戠⁹獵湩潳癬湥⁴ 敤牧慥敳⼠挠敬湡牥琠敲潭敶爠獥摩敵ⱳ映牯映潬牯挠敬湡湩污敭档湡穩摥攠畱灩敭瑮猠慨汬戠獵摥氠歩捳畲扢牥慳摮牥ⱳ栠瑯戠潬敷獲慶畣浵挠敬湡牥ⱳ洠楯瑳牵整瑳洠捡楨敮挠浯汰瑥湩汣摵湩慬楹杮漠洶桴捩偅⁕汦潯楲杮愠敤捳楲敢敨敲椭敢潬⁷潣灭敬整愠汬愠灳捥晩敩…楤敲瑣摥ⴺ⠊⥡䄠灰祬湩潳癬湥⁴牦敥攠潰祸爠獥湩戠獡摥瀠楲敭吠敨瀠楲敭桳污敢愠灰楬摥礠敩摬湩敤瑰景㈠〰洠捩潲⠊⥢䄠灰祬湩灥硯⁹慢敳楨桧猠牴湥瑧敳晬猭潭瑯楨杮敳晬氭癥汥湩捳敲摥桔捳敲摥猠慨汬栠癡業楮畭桴捩湫獥景㌠〸‰業牣湯吠敨䌠浯牰獥楳敶猠牴湥瑧景猠牣敥楷汬戠桴慲杮景㘠ⴰ〷䴠慰敔獮汩瑳敲杮桴眠汩敢ㄠⴵ〲䴠慰愠摮䘠敬畸慲湩琠敨爠湡敧漠〴㐭‵灍圠瑡牥愠獢牯瑰潩楎⠊⥣䄠灰祬湩偅⁕慢敳敳晬氭癥汥湩潴⁰潣瑡瑉猠潨汵楹汥桴捩湫獥景㈠〰‰業牣湯吠敨䌠浯牰獥楳敶猠牴湥瑧景琠灯挠慯⁴楷汬戠桴慲杮景㘠ⴰ〷䴠慰敔獮汩瑳敲杮桴眠汩敢ㄠⴵ〲䴠慰愠摮䘠敬畸慲瑳敲杮桴椠桴慲杮景㈠ⴵ㔳䴠慰ਮˠ"ӄȈ䴀䰦爠灥楡潴搠浡条摥愠摮漯牢歯湥攠杤獥潣湲牥景琠敨攠楸瑳湩散敭瑮挠湯牣瑥汳扡景爠湵慷⽹呐⽔䐠獩数獲污祢挠瑵楴杮甠瑰敤瑰景㔠浣慤慭敧Ɽ猠潰汩摥攠楸瑳湩挠湯牣瑥慰敶敭瑮ⱳ猠慬獢琠敲瑣湡畧慬牯猠畱牡湩挠潲獳猠捥楴湯愠摮爠浥癯湩污潬獯ⱥ映牯楥湧洠瑡牥慩獬愠摮搠獵⁴瑥戠⁹湡⁹敭档湡捩污洠慥獮愠楤敲瑣摥愠摮搠獩潰楳杮漠晦琠敨爠扵楢桳琠楤瑳湡散渠瑯攠捸敥楤杮ㄠ〰‰瑭Ⱳ挠敬湡湩桴畳晲捡獥琠潨潲杵汨⁹楷桴戠畲桳愠摮挠浯牰獥敳楡湡灡汰楹杮漠敮挠慯⁴景攠潰祸瀠楲敭…楦汬摥眠瑩灥硯⁹潭瑲牡愠灳捥晩敩湩汣摵湩敮散獳牡⁹牦浯眠牯Ⱬ眠敨敲敶敲畱物摥污獡瀠牥洠湡晵捡畴敲❲湩瑳畲瑣潩獮挠浯汰瑥污獡猠数楣楦摥☠搠物捥整上瑯獥›椨
汁桴潣灭湯湥獴漠灥硯⁹潭瑲牡猠捵獡爠獥湩慨摲敮Ⱳ映汩敬獲慳摮攠捴桳污敢映牯畭慬整祢挠浯慰祮椠獴汥湡瑩猠慨汬戠牢畯桧⁴瑡猠瑩湩猠慥敬潣摮瑩潩楷桴挠浯慰祮瀠捡楫杮ਮ椨⥩䌠浯慰祮瀠捡楫杮漠据灯湥摥桴桷汯慭整楲污桳污敢挠湯畳敭楷桴湩漠敮栠畯湡敬瑦漠敶慭整楲污猠慨汬渠瑯戠敲獵摥ਮ椨楩
敂潦敲攠數畣楴杮琠敨眠牯瑡琠敨猠瑩ⱥ愠汬琠敨爠煥極敲慭整楲污猠慨汬戠潲杵瑨琠楳整椠楳杮敬氠瑯愠灡牰癯摥愠摮爠捥牯敤湩䴠⁂楷桴琠獥⁴散瑲晩捩瑡獥愠摮朠慵慲瑮敥挠牥楴楦慣整獩畳摥戠⁹桴慭畮慦瑣牵牥鸮ᨂꐀἂ娀ࠀ慎敭漠潗歲›剐噏⁎䙏䔠佐奘䘠佌剏义⁇佔䠠乁䕇卒䄠⁔剁⁃呁䄠卆匠剁䅓䅗唠䑎剅䜠⁅䙁匠剁䅓䅗ìĈ䌀湯牴捡⁴潎›䌠䕗䄯⁆䵁⽂䅓ⵒ㍔⼵〲㘲㈭‷†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††ภ᐀뀀ࠀ敔摮牥䤠癮瑩湩畁桴牯瑩㩹†先䌠䵏䅍䑎剅圠剏卋䔠䝎义䕅⁒䄨剉䘠剏䕃
䵁䅂䅌䌠乁呔䥍䥌䅔奒䔠䝎义䕅⁒䕓噒卉卅†††††††††††††††††††††匠牥慩慐敧丠›††††§ѡ一瑯獥映牯䈠兏椠整潎ㄱ〮‰椨
桔偅⁕汦潯楲杮猠慨汬戠硥捥瑵摥戠⁹湯景琠敨愠灰潲敶慭畮慦瑣牵牥猧愠瑵潨楲敺灡汰捩瑡牯漠汮吠敨愠瑵潨楲敺灡汰捩瑡牯猠慨汬栠癡業楮畭桴敲敹牡潤畣敭瑮摥攠灸牥敩据湩琠敨攠數畣楴湯漠偅⁕汦潯楲杮琠硥獩楴杮挠湯牣瑥汦潯獲桔潣瑮慲瑣牯猠慨汬猠扵業⁴敮散獳牡⁹潤畣敭瑮湩琠楨敲慧摲愠摮琠敨猠浡桳污敢愠灰潲敶祢䜠⹅䄠汬洠瑡牥慩獵摥椠桴獩猠獹整桳污敢漠楳杮敬洠湡晵捡畴敲潴攠獮牵潣灭瑡扩汩瑩⁹湡牰灯牥戠湯楤杮汁慭整楲污椠潴戠敤楬敶敲潴琠敨樠扯猠瑩湩琠敨洠湡晵捡畴敲❲牯杩湩污瀠捡慫楧杮愠摮猠慨汬戠硥捥瑵摥琠牨畯桧愠瑵潨楲敺灡汰捩瑡牯漠汮⠊楩
†潃瑮慲瑣牯猠慨汬猠扵業⁴敐晲牯慭据畇牡湡整湡敓畣楲祴搠灥獯瑩䀠ㄠ‥景挠湯牴捡⁴浡畯瑮愠灳捥晩敩⠊楩⥩†䔠啐映潬牯湩桳污敢瀠潲楶敤牦浯䔠灸湡楳湯樠楯瑮ⱳ䐠浵祭樠楯瑮…潃獮牴捵楴湯樠楯瑮潴戠潣敶敲楷桴琠敨瀠潲楶楳湯摥映潬牯湩祳瑳浥桔潣瑳漠牰癯獩潩敮汦潯楲杮猠獹整癯牥樠楯瑮桳污敢搠敥敭潴椠据畬敤湩焠潵整慲整景䔠啐映潬牯湩湡牡慥漠硅慰獮潩潪湩獴畄浭⁹潊湩獴☠䌠湯瑳畲瑣潩潪湩獴猠慨汬戠敤畤瑣摥映潲敭獡牵浥湥⁴景䔠啐映潬牯湩 | 30 | Ten RM | - | - |
| 12 | M&L aromatic PU coating over primer 'FK 666' or equivalent as approved as per manufacturers instruction/specifications as in lines dashes, arrows, letters, circle etc. width or girth like exceeding 10cm marking in yellow/white/red/golden/orange colour as approved by GE complete all as specified & directed | 396 | Sqm | - | - |
| 13 | Demolition of plain cement concrete (unreinforced) as in ground floor, paving not exceeding 15cm thickness including removal of debris outside the MoD land complete all as specified & directed. | 15 | Cum | - | - |
| 14 | M&L 75mm thick plain cement concrete (PCC) 1:2:4, type B-1, using 20mm graded mechanically crushed stone aggregates as in path/hardstanding complete all as specified & directed | 200 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.26 MB
BOQ_896956.xls
BOQ • 0.77 MB
Tender35T.pdf
Tender Documents • 0.75 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .