PERIODICAL SERVICES AND CONNECTED WORKS IN ZONE-III AND ZONE-IV AREA UNDER AGE B/R-II OF GE (I) KANPUR

Amount

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed. Note: Rate quoted by the contractor shall be deemed to including required scaffolding for work up to G+2 height and protective measures.

M&L for complete removal of existing treatment mechanically with electric paint remover dry wall sander machine and preparation of walls, and applying two coat of white/ colour wash complete all as specified and directed. Note: Rate quoted by the contractor shall be deemed to including required scaffolding for work up to G+2 height and protective measures.

M&L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of cement base paint. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of exterior weather proof anti algae . The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for complete removal of existing treatment mechanically with electric paint remover dry wall sander machine and preparation of walls and applying two coat of exterior weather proof anti algae paint over and including a coat of primer . The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for applying a layer of white putty, 1mm average thick before applying wall finishes complete all as specified and directed. Note: Rate quoted by the contractor shall be deemed to including required scaffolding for work up to G+2 height and protective measures.

M&L for complete removal of existing treatment mechanically with electric paint remover dry wall sander machine and preparation of walls and applying two coat of oil emulsion distemper/acrylic washable distemper over and including a coat of primer over . The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying One coat of oil emulsion distemper/acrylic washable distemper (of any colour). The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour) complete all as specified and directed.

M&L for preparation of old painted surfaces of iron and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour) complete all as specified and directed.

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and as directed.

M&L Brick work old size sub class ' B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.

Dismantiling of loose concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling and also remove any existing treatment on RCC surface by rubbing, scrapping etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins (manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusing necessary form work & scaffolding up to Three storey complete and surface of guniting to be finished fair and even with and including 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting, white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractor on this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separately.

M&L for Mild Steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as directed and specified.

M&L for welded steel wire fabric weight n exc 4 Kg/sqm complete all as specified and directed.

M&L for 15mm thick rendering of brick wall in CM 1:6 finished even & fair on other than fair faces up to ceiling height including required scaffolding etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & fair with using WPC complete all as specified and directed. Note: (i) WPC shall be measured and paid separately. (ii) Rate quoted by the contractor shall be deemed to including required scaffolding for work up to G+2 height and protective measures.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement including required scaffolding complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Supplying and Applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed. Note : (i) The Coverage is to be strictly maintained for film formation. (ii) Rate quoted by the contractor shall be deemed to including required scaffolding for work up to G+2 height and protective measures.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement based paint over and including one coat of primer on wall with roller/ brush including initial and final curing The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for preparation of newly plastered surface of walls and applying two coat of exterior weather proof anti algae paint over and including a coat of primer. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10 Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for preparation of newly plastered surface of walls and applying two coat of oil emulsion distemper/acrylic washable distemper over a coat of primer over . The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed. Note: Rate quoted by the contractor shall be deemed to including required scaffolding for work up to G+2 height and protective measures.

M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for writing letters or figures (Block,Roman,Italic or Indian( n exc. 30CM high) complete all as specified and directed.

M&L for Stops, commas, short lines, dashes, hyphens, brackets, etc complete all as specified and directed.

S&F in repair 3 mm thick sheet glass panes any size fixed on door/ window shutters with and including beading/ putty/ rubber gasket etc. complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm average width of aperature fixed with tinned tacks or galvanished wire staple complete all as speficied & directed.

S&F in repair, stainless steel curtain rods of 25 mm dia as in doors/ windows pelmets.SS brackets fancy type, including screws and other necessary fitting for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

M/S KALI CHARAN PANDEY AND CO. (BID ID -3467703)