SPL REPAIR TO BLDG NO T-91 OF LT AD DET AT BASE CAMP UNDER GE 873 EWS

Demolition of cement concrete in ground floors and pavings not exceeding 15 centimetre thickness (below or above ground level), complete all as specified and as directed.

M&L 25mm thick plain cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate) as in floor, complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick in Cement Mortar 1:6 for laying floor finishes, complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets complete all as specified and as directed.

M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in wall panelling, complete all as specified and as directed.

M&L 9 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in ceiling works complete all as specified and as directed.

Dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section complete all as specified and as directed.

M&L second class softwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm.

M&L second class softwood plain fillets, rectangular in section, clean swan, secured with nails exc 3 and n.exc 6 Sqcm. complete all as specified and as directed.

Dismantling of plain of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering.

S&F Galvanised MS sheeting of 0.63mm thick corrugated with two corrugation side laps and fixed with J hooks two framed work with PVC and steel washers as in roof & wall with Zinc coating of 275 complete all as specified and as directed.

S&F plain, galvanised MS sheeting of 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide complete all as specified and as directed

M&L for Preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying two coats synthetic enamel paint on wooden surfaces complete all as specified and as directed.

Takingdown chowkats or frames with shutters (without taking offf shutters from the frames) not exc. 1.5 sqm each. (Steel/Wooden)

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each. (Steel/Wooden)

S&F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats, complete all as specified and as directed.

S&F Glazed and skeleton shutters of 30mm thick 2nd class hardwood ,open rebated and prepared to receive glass,gauze etc.(without sash bars),edges of framing plain chamfered or rounded.fitted with cut and mitred beads for securing etc if windows,ventilators etc., complete all as specified and as directed.

M&L for painting to new wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips and providing new pins / spring clips, complete all as specified and as directed.

S & F 3.00mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane.

S & F butt hinges 100mm mild steel cold rolled, medium weight, complete all as specified and as directed.

S&F butt hinges 75mm mild steel cold rolled, medium weight, complete all as specified and as directed.

S&F MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed.

S&F MS barrel tower bolt 150mm long stove enamelled black, complete all as specified and as directed.

S&F MS barrel tower bolt 100mm long stove enamelled black, complete all as specified and as directed.

S&F of Extruded aluminium alloy handles fabricated type anodised 100 mm size, complete all as specified and directed.

S&F of Extruded aluminium alloy handles fabricated type anodised 150 mm size, complete all as specified and directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed.

S&F in repair Curtain rail Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc and fixed, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 75mm thick using 40 mm graded stone aggregate as in plinth protection and Finishing cement concrete surface even and smooth with out using extra cement, complete all as specified and as directed.

Taking down carefully damaged copper/ aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

M&L Point wiring for point wiring for one light or fan point controlled by one switch with using 1.5 Sqmm (nominal area) (multi-stranded) copper conductor FRLS PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including 1.5 Sqmm copper conductor single core (green colour) FRLS PVC insulated unsheathed electric cable 1100 volts as continuous earth wire connected to common earth dolly including suitable size and shape, ISI marked PVC moulded Gang boxes for fixing of switches & sockets etc. complete all as specified and directed.

All as per serial item No 35 above but point wiring for One 3 pin socket outlet 5 Amps on same board

All as per serial item No 35 above but point wiring for one 3 pin 5 Amps Switch socket combination on independent board

All as per serial item No 35 above but power point wiring for one 6 pin 5/15 Amps Switch socket combination on independent board with using 4.0 Sqmm (nominal area) (multi-stranded)copper conductor FRLS PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including 4.0 Sqmm copper conductor single core (green colour) FRLS PVC insulated unsheathed electric cable 1100 volts as continuous earth wire

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed.

S&F socket outlet 3 pin, 5A (multipurpose) suitable for flush type, 230 V AC complete all as specified and directed.

S&F switch socket combination 3 pin, 5 Amps, flush type, 230 V AC complete all as specified and directed.

S&F switch socket combination 6 pin, 5/15 Amps, flush type, 230 V AC complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with LED driver, individual optics lens with IP 65/66 protection and steet light GI/MS bracket for fixing complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with two core copper cable of suitable size complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

Taking down of MCB DB/TPN 8way/12way including mcb sp and spn and making good of wall complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 suitable for 8 way complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN 6 to 20 AMP, in the MCB DB connection and testing complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN 16 to 32 AMP, in the MCB DB connection and testing complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as per shown in electrical plate No. 5 of MES Schedule Part-I with connected to earth test point and sheet metal encloser with including necessary earth work and Pre- cast RCC earth pit with cover complete all as specified and directed.

S&F for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 4 core, cross-sectional area 16 sq. mm, complete all as specified and directed.

Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item

Please Enable Macros to View BoQ information